Grupos FAQ

Saltar a: navegación, buscar

Nota: Pendiente de Traducir. ¡Anímese a traducir esta página!.     ( y otras páginas pendientes)

Contenido

General

¿Qué es la configuración de 'modo de grupos'?

You can have several classes/groups working in a single course with different (or the same) teacher. Groups mode is a way of filtering the students so that work and grades can be accessed separately. See Grupos for more information. There are three different groups modes – No groups, Separate Groups, Visible Groups. In ‘Separate groups’ mode, each group can only see their own group – other groups are invisible. In ‘Visible groups’ mode, each group works in their own group, but can also see other groups.

Teachers are normally able to see other teachers' groups's activities as well as their own unless the capability Capabilities/moodle/site:accessallgroups has been set to "prevent".

¿Cual es la diferencia entre una Cohorte y un Grupo?

A group exists only within a course. You might have a class 10B for example which you want to enrol in course 1 and course 2. The group would need to be created in both courses and its members enrolled separately in both courses. Cohortes are groups of users created by admin which can then be brought in "en masse" to courses. So if class 10B is created as a cohort by admin, then it can be selected in those courses where enrolment via cohort has been enabled. (For more information on creating and using cohorts, see here: Cohortes) Once members of a cohort have been added to a course, they can be included in a group, either by using the "auto create groups" feature or by adding the members to an empty or pre-created group.

¿Cual es la configuración 'forzar'?

If force is set to yes, then all activities are group activities. This overrides any settings for individual activities. If force is set to no, then activities are only group activities if they have been set to group mode. In this case, each activity requires to be set to group mode individually.

¿Puedo yo automáticamente añadir usuarios a un grupo al mismo tiempo que los inscribo mediante un archivo CSV?

Yes. One of the optional field names that can be uploaded in the flat file is "group1, group2, etc". The group must be associated to the corresponding course and the course short name used in the field course1. If the group doesn't already exist then Moodle will create the group. Here is an example of a portion of a csv file that would enroll students into a group entitled 'Class A' within a course entitled 'Astro1'. (Note that you can assign students to groups using this file even if they are already enrolled in Moodle, as you can select to update the user details when uploading the file.)

username, password, firstname, lastname, email, course1, group1,...
    jdoe, changeme, Jane, Doe, jdoe@email.org, Astro1, Class A,...

¿Cómo asigno un profesor a un grupo? ¿Puede un profesor estar en más de un grupo?

Usted puede asignar un profesor a un grupo en exactamente la misma forma en la que Usted asigna un estudiante a un grupo.

¿Cómo restrinjo para que un profesor solamente pueda ver información acerca de los grupos en donde és está?

For Separate Groups mode, the capability moodle/site:accessallgroups may be used to restrict access to all groups in a particular context. If this capability is removed from the teacher role (either within a course or globally if appropriate) then they will only see the students they teach when accessing the gradebook for example.

To do this for all teachers globally:

  1. Site administration>Users>Permissions>Define roles
  2. Select the editing teacher role;
  3. Click to edit the role
  4. Click the Show advanced button
  5. Type in the search box accessallgroups
  6. When it appears, click Prevent

To do this within a course:

  1. Course administration>Users>Permissions
  2. Type accessallgroups into the filter
  3. Click the X to remove from the editing teacher (Teacher) role.

¿Qué determina el que los estudiantes puedan o no ver el perfil de un profesor?

Un estudiante puede ver el perfil de todos los profesores que sean miembros de sus grupos o que tengan derechos de edición.


Yo tengo dos grupos que se juntan en días diferentes. ¿Puedo yo configurarles Actividades para horarios diferentes para los dos grupos?

(Moodle 2.7 y anteriores) Usted puede usar Agrupamientos para lograrlo en cierta medida. Si USted está usando un Examen de Moodle, Usted puede configurarle horarios diferentes para grupos diferentes al emplear configuraciones de anulación de grupo.

}(Moodle 2.8 y posteriores) Usted puede duplicar las actividades y añadir restricciones por grupo, tal como se describe en Grupos. Las actividades condicionales en Moodle 2.8 y anteriores o la Restringir acceso en Moodle 2.9 y más recientes, deben de estar habilitadas.

¿Puedo yo usar el mismo grupo para más de un curso?

Not directly, although there are some workarounds to accomplish this.

  • Use the Importar grupos Import tool to import a file with the groups and settings (though not memberships).
  • Create the groups by import or manually with enrollment keys on them and give the students group enrolment keys to enrol themselves into the right group for each course.
  • Admins and managers can enrol users in bulk via File Upload or Cohortes to include group membership.
  • Make a template with the enrolments and groups and restore it to a new course with user data.
  • Create a master course with all the students enrolled and in the correct groups, and then to make each of the courses a metacourse based on that master course. Note that metacourses do not carry over group enrolments. See the documentation on Metacourses.

¿Puede un estudiante ser miembro de más de un grupo?

Si, un estudiante si puede estar en más de un grupo.

Si un estudiante está en un grupo, tienen entonces que estar todos los estudiantes en algún grupo?

No, un estudiante no necesita forzozamente pertenecer a un grupo.

Si yo tengo varios grupos, puedo hacer que una actividad o recurso específico sea visible solamente para uno de estos grupos?

(Moodle 2.7 y anteriores) You can organise groups into agrupamientos, then assign an activity (or resource) to a particular grouping. If you want to show a resource (such as a file or folder) to only one group then Make sure that you admin has enabled "available for group members only" in Settings>Site administration>Development>Experimental and then see Disponible solamente para miembros de grupo

¡Nueva característica
en Moodle 2.8!

Usted puede añadir restricciones por grupo, como se describe en Grupos. Las Actividades condicionales deben de estar habilitadas.

In any version of Moodle you can make a forum post visible to just one group. You must first select that specific group from the dropdown and post the message to that group (rather than to "all participants")

¿Puedo tener un conjunto de de grupos para la Actividad A y otro conjunto de grupos para la Actividad B?

You can create two different agrupamientos (a grouping is a set of groups), and assign different groupings to the two activities.

¿Es posible ver a todos los grupos en un curso como una lista que pudiera imprimir?

The groups overview page in Settings > Course administration > Users > Groups provides a table listing groups, group members and a user count.

Cuando yo trato de añadir un estudiante, todos ellos siempre son añdidos l primer grupo, sin importar el grupo que yo seleccione?

Make sure that the students name does not include any punctuation. There is also a workaround – give each group a temporary name at the start of the alphabet, put your students in the group and then rename the group.

¿Cómo puedo eliminar un grupo?

After clicking, "Groups" in Settings>Course administration>Users>Groups..

  1. Select the group that you want to delete.
  2. Click the "Delete selected group" button

¿Cómo puedo importar una lista de estudiantes a un grupo?

Por favor, revise Subir usuarios.

¿Cómo puedo ordenar automáticamente a los estudiantes dentro de grupos al momento de la Inscripción?

You can make use of claves de inscripción. Set an enrolment key in Settings>Course administration>Users>Enrolment methods>Self enrolment (to enforce the enrolment key dialogue form when students enrol). That key is only for students who should not be in a group and to keep out any unwanted students. Then in Settings>Course administration>Users>Groups you create your groups and add a different enrolment key for each group. When a student enrols, using an enrolment key that is connected to a certain group, the student will automatically be part of that group.

(Moodle 2.7 y anteriores) ¿Cómo puedo cambiar el orden de ordenación de los participantes?

The admin can change the "fullnamedisplay" variable which will affect the sort order of participants for the entire Moodle site. This can be found in the Bloque de administración del sitio under Security>Site Policies>Full name format. The default is First+Surname, with First, and Surname+First as options. Some language packs have other options.

¿Cual es la diferencia entre un Grupo y un Agrupamiento?

See Groups versus groupings forum post http://moodle.org/mod/forum/discuss.php?d=131905. A grouping can be thought of as a category of groups. A grouping is a meta group. Student membership to a "grouping" can only happen by their membership to a group that is associated with the grouping.

¿Qué es un grupo huérfano?

Un grupo huérfano es un grupo que no pertenece a ningun agrupamiento.

¿Hay alguna otra manera de permitirles a los estudiantes elegir un grupo?

There is a contributed module ChoiceGroup which will do this. See also on youtube:this screencast

¿Cómo puedo ver la lista de participantes para solamente un grupo?

For this, you need Groups mode switched ON at course level in Course settings.

Grupos y módulos de actividad

Different activity modules vary as to how they treat groups – some have better support for groups than others!

In general if you have questions about how an activity supports groups, you’re advised to post in the forum for the activity module, and not the groups forum.

¿Cuales módulos de actividad NO soportan el modo de grupo?

Todos los módulos de actividad soportan el uso del modo de grupo a excepción de Glosario, Lección, y SCORM.

¿Qué pasa si yo cambio una actividad que era de modo sin-grupos a que ahora sea modo con grupos?

This depends on the activity module in question.

For forums, posts made before the forum is put into groups mode are visible to all students after you have put the forum into group mode. However students cannot reply to these posts if they have no group (i.e. blank).

¿Qué pasa si yo cambio los grupos para una actividad en el modo de grupos; por ejemplo, si yo muevo a un estudiante de un grupo hacia otro?

Again this depends on the activity module. You may find that grades or activity logs are lost, so check for the specific activity module first.

¿Cómo publico un mensaje en un Foro para que solamente pueda verlo un grupo?

Before you click 'Add a new topic', you need to choose the group from the Separate groups drop-down menu at the top left.

Como profesor, quiero poner la misma publicación en el foro de cada grupo, y que los alumnos puedan contestarla. ¿Cómo puedo hacer esto?

You need to post the same message into the forum for each group. There is currently no way to do this in one go if you want students to be able to reply to your post. If you don't mind students not being able to reply, then you can of course just post the message to all participants.

(Moodle 2.7 y anteriores) ¿Puedo ocultar una actividad o un recurso en un curso a todos los que no estuvieran asignados a un grupo?

You can use the Disponible solamente para miembros de grupo experimental setting for allowing access to an activity/resource only to participants who are assigned to a group. If no participant on the course site is assigned to a group, ticking the 'Available for group members only' will effectively hide the activity/resource from everyone.

Vea también