NTLM authentication
This document describes how to set up NTLM/Windows Integrated Authentication in Moodle.
Overview
Integrated Windows Authentication uses the security features of Windows clients and servers. It does not prompt users for a user name and password. The current Windows user information on the client computer is supplied by the browser through a challenge/response authentication process with the Web server for the Moodle site.
Assumptions
- You are running MS Active Directory for Authentication.
- The Server hosting your website is a member of the Active Directory Domain that your users are also members of.
- You are able to define people inside your Network (and authenticated to the Domain) from an IP range of computers.
- You are familar with or have read the LDAP authentication documentation.
- The Active Directory domain credentials of your users are returned as DOMAINNAME\username from your authentication service. If you are using the Winbind service from the Samba project, this can be untrue, depending on your Winbind configuration settings. If you are using Moodle 2.4 or later, you can specify the format of the domain credentials (see below). If you are using an older version and you can not modify your settings to satisfy this last assumption, then you will need to remove or comment out the line that reads:
$username = substr(strrchr($username, '\\'), 1); //strip domain info
and add the relevant lines of code to extract the username part from the domain user credentials and store it in $username.
- VERY IMPORTANT: NTLM authentication depends on LDAP authentication, and NTLM configuration is specified in the LDAP authentication settings page (Site Administration >> Plugins >> Authentication >> LDAP Server). So before trying to configure NTLM, make sure you have LDAP_authentication properly setup and working.
Installation
No installation needed. See Site Administration >> Plugins >> Authentication >> LDAP Server for the NTLM config options. You only have to
- Enable NTLM SSO
- Set the IP/Subnet mask for the clients (see below)
- (Optionally) Set the "Remote username format" for your domain user credentials format (see below)
- On IIS: turn on Windows Authentication
- On Apache - use one of the 3 methods outlined below
- On the client pc's, you might need to set the moodle server ip/moodle url as being in "local intranet" (From IE, tools -> options -> security -> local intranet)
It is important to note the following conditions must be satisfied to let NTLM SSO happens:
- you've arrived to the login page with one GET request
- you've ldap->ntlmsso_enabled
- you've ldap->ntlmsso_subnet
- you aren't logged
- the IP of the client is in ntlmsso_subnet
Thus it is needed to set the IP subnet.
How to Turn Integrated Authentication on
The auth/ldap/ntlmsso_magic.php file MUST have NTLM/Integrated Authentication enabled on the server or the authentication will not work.
IIS Configuration
Open the IIS Management Console and navigate to the auth/ldap/ntlmsso_magic.php file.
IIS 6.0
- right click on the file, choose properties
- under the "file security" tab, click on the Authentication and Access control "edit" button
- untick "Enable Anonymous Access" and tick "Integrated Windows Authentication"
IIS 7.x
- After navigating to the 'auth/ldap' folder, switch to Content View
- right click on the file, choose "Switch to Features View"
- click on the Authentication icon on the right
- select 'Anonymous Authentication' and click the 'Disable' button
- select 'Windows Authentication' and click the 'Enable' button
- According to this post, if you are using IIS 7.5 (it comes with Windows Server 2008 R2), you have to select 'Windows Authentication' and click on 'Providers'. This shows a list of enabled providers (Negotiate and NTLM, by default). Change the order so that NTLM is at the top of the list.
- If 'Windows Authentication' is not available, then you need to install it as a separate authentication provider (in Control Panel).
APACHE Configuration
There are currently 4 possible methods for this:
Using the NTLM part of Samba for Apache on Linux
- If using Ubuntu 12.04 or higher you can install this using:
sudo apt-get install php5-ldap libapache2-mod-auth-ntlm-winbind winbind smbfs smbclient samba sudo a2enmod auth_ntlm_winbind sudo /etc/init.d/apache2 restart
Note: On Ubuntu 14.04 smbfs has been replaced with cifs-utils
- If you are using an earlier version of Ubuntu or another distribution you can get the plugin here: http://samba.org/ftp/unpacked/lorikeet/mod_auth_ntlm_winbind/ . You need to download all the files from the link, but not the
contrib
anddebian
directories. Then follow the instructions given inside theREADME
file. If you are using Debian/Ubuntu, you can follow these compilation instructions. - Once you have compiled it, put it inside Apache's modules subdirectory (this location depends on a number of factors, like compiling Apache yourself, using different Linux distributions packages, an so on), and load and enable the module in Apache's configuration. For example, if your Apache modules are under /usr/lib/apache2/modules, you'll need something like this in your Apache configuration file (usually called apache2.conf or http2.conf):
<IfModule !mod_auth_ntlm_winbind.c> LoadModule auth_ntlm_winbind_module /usr/lib/apache2/modules/mod_auth_ntlm_winbind.so </IfModule>
- Install the Samba winbind daemon package. This packages relies on Samba's configuration file to get some important settings (like the Windows domain name, uid and gid range mappings, and so on). In addition to that, you'll need to make your Linux/Unix machine part of the domain. Otherwise winbind won't be able to pull user and groups information from the domain controllers. You should read the Samba documentation to perform this step, but the most important part is having something like the following lines in your
smb.conf
file, inside the [global] section (in addition to what you already have there):
workgroup = DOMAINNAME password server = * security = domain encrypt passwords = true idmap uid = 10000-20000 idmap gid = 10000-20000
- and executing the command (as root):
# net join DOMAINNAME -U Administrator
- where DOMAINNAME is the NetBIOS windows domain name, and Administrator an account with enough privileges to add new machines to the domain.
You'll need to type this account's password for the command to succeed.
- In Windows environments you could also try executing the command (as root):
# net join DOMAINNAME -S DCSERVER -U Administrator
- where DCSERVER is the Domain Controller server
- Also, make sure you have disabled "Microsoft Network Server: digitally sign communications (always)" in your Domain Controllers Security Policy, unless you are using a version of Samba that can sign SMB packets.
- Restart the winbind service to apply the changes and test that it's running ok by executing:
$ wbinfo -u
- You should get the full list of Windows domain users. If you use -g instead, you'll get the domain groups list.
- Check that your winbind package installed the authentication helper command ntlm_auth, as we'll need it later. We'll assume the helper is located at /usr/bin/ntlm_auth. If yours is at a different location, make sure you adjust the path in the example below.
- Add something like this to your Apache configuration file (usually called apache2.conf or http2.conf). We'll assume that your Moodle $CFG->dirroot directory is located at /var/www/moodle in the example:
<Directory "/var/www/moodle/auth/ldap/"> <Files ntlmsso_magic.php> NTLMAuth on AuthType NTLM AuthName "Moodle NTLM Authentication" NTLMAuthHelper "/usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp" NTLMBasicAuthoritative on require valid-user </Files> </Directory>
- Check the permissions of the Winbind pipe directory (Ubuntu places it under /var/run/samba/winbindd_privileged, yours may be placed at a different location). Apache will need to be able to enter that directory, so we need to make sure it has the right permissions. So have a look at the permissions of that directory and note the name of the group assigned to it. The following example is from a Ubuntu 7.10 machine:
$ ls -ald /var/run/samba/winbindd_privileged drwxr-x--- 2 root winbindd_priv 60 2007-11-17 16:18 /var/run/samba/winbindd_privileged/
- so we see the group is winbindd_priv.
- Instead of modifying the directory permissions (which could break other services that use winbind) we are going to make the Apache user (www-data in our example, but could be httpd, or nobody, etc.) is part of the appropiate group. Execute the following as root:
# adduser www-data winbindd_priv
- adduser is available in Debian and Ubuntu at least. If your distribution doesn't have adduser, you can edit /etc/group manually to achive the same effect.
- Stop and start the Apache service to apply the changes. Have a look at Apache's error log to see that everything is ok.
- Couple of gotchas - in Fedora Core (and also in Redhat/Centos), keep alive is turned OFF by default in the httpd.conf - see this bug for further info: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=188138
simply change the line to that was:
KeepAlive Off
to:
KeepAlive On
and restart apache (/etc/init.d/http restart)
- Here are some notes from people who have the samba winbind option working
- -- I made it work using Ubuntu 7.04. That's what I've used to update the documentation. Iñaki Arenaza 10:43, 30 September 2007 (CDT)
- -- I have this working on Ubuntu 8.04 LTS in an RM CC4 Active Directory Domain. Ian Ohr 16:31 15 December 2009 (GMT)
- -- Running on Ubuntu 10.04 Lucid, Apache2 got this running in no time flat with AD v6. Worth noting that if Using Iñaki Arenaza's LDAP Clone plugin, you will need to add another copy of the Directory tag in apache2.conf pointing at the new ldap plugin. --Christopher O'Kelly 10:09, 16 April 2012 (WST)
- -- On Ubuntu 14.04 I had to do the following to get NTLM auth working as I was getting the error "ntlm_auth reports Broken Helper: BH NT_STATUS_UNSUCCESSFUL NT_STATUS_UNSUCCESSFUL" in the Apache error logs (from Launchpad) Ngmares:
usermod -a -G winbindd_priv www-data chgrp winbindd_priv /var/lib/samba/winbindd_privileged ln -s /var/lib/samba/winbindd_privileged/pipe /var/run/samba/winbindd_privileged/pipe
Using the NTLM Auth Module for Apache on Linux
The NTLM Auth module is a bit stale and even its authors suggest that you use the NTLM part of Samba with Apache on Linux
Get it from here
- get the Module from: http://modntlm.sourceforge.net/
- follow the instructions given there and inside the README that comes with the package.
I (Iñaki Arenaza) strongly recommend using the NTLM part of Samba with Apache on Linux over this module. It's better maintained, more robust and has more features.
Using the mod_auth_sspi Module for Apache 2 on Windows
NOTE: This setup is currently being used in a live production environment, and is therefore suitable for such use provided it is correctly configured and tested.
This is the recommended method for Apache 2 on Windows, however it will not work on Linux/UNIX systems. It provides better stability and higher performance than other NTLM modules.
- Download the mod_auth_sspi Module from: http://sourceforge.net/projects/mod-auth-sspi/. At the moment of writing this (2007.09.30), the current version is mod_auth_sspi 1.0.4, which has two different ZIP files to download:
- mod_auth_sspi-1.0.4-2.0.58.zip : Use this file if you are using Apache 2.0.x.
- mod_auth_sspi-1.0.4-2.2.2.zip : Use this file if you are using Apache 2.2.x.
If you are using an x64 version of Apache mod_auth_sspi x64 versions are available from https://www.apachehaus.net/modules/mod_auth_sspi/
These files do not work with Apache versions 2.4.x.
- Unzip the right file and copy mod_auth_sspi.so (it's inside bin subdirectory) to your Apache modules directory.
- Edit your Apache 2 configuration file (httpd.conf) to load the module.
<IfModule !mod_auth_sspi.c> LoadModule sspi_auth_module modules/mod_auth_sspi.so </IfModule>
- Choose one of the two methods below
- Method 1: This method is recommended for servers that will host a single Moodle instance. Configure NTLM from the main configuration file, add the following to httpd.conf (substitute "C:\moodle" with the path to your Moodle installation e.g. "C:\my-moodle"
<Directory "C:\moodle\auth\ldap"> <Files ntlmsso_magic.php> AuthName "Moodle at My College" AuthType SSPI SSPIAuth On SSPIOfferBasic Off SSPIAuthoritative On SSPIDomain <YOUR AD DOMAIN> require valid-user </Files> </Directory>
- Method 2: The alternative method is to use a .htaccess file
- This method is recommended for servers that will host multiple Moodle instances. It allows additional Moodle instances to be configured without restarting apache, and also makes the solution a little more portable. We need to add a directive to the main httpd.conf to allow configuration of authentication within .htaccess files.
<Directory C:\moodle> AllowOverride AuthConfig </Directory>
- Create a new text file named '.htaccess' in the directory 'C:\moodle\moodle\auth\ldap' and add the following directives:
<Files ntlmsso_magic.php> AuthName "Moodle at My College" AuthType SSPI SSPIAuth On SSPIOfferBasic Off SSPIAuthoritative On SSPIDomain mycollege.ac.uk require valid-user </Files>
- This enables the Moodle folder to be moved to any apache webserver that is configured to allow authentication configuration through .htaccess
Lastly for Internet Explorer 7 onwards you must also replace this line in your httpd-ssl.conf file:
BrowserMatch ".*MSIE.*" \
with
BrowserMatch ".*MSIE [2-5]\..*" \
For further help and discussion: http://moodle.org/mod/forum/discuss.php?d=56565
Using the Kerberos Auth Module for Apache on Linux/UNIX (mod_auth_kerb)
- Install and configure http://modauthkerb.sourceforge.net/
- Configuration of mod_auth_kerb in a Microsoft Windows Active Directory environment (AD 2003 and above) (http://grolmsnet.de/kerbtut/)
Environment details in this example:
- Active Directory Domain: EXAMPLE.AC.UK
- Active Directory Domain Controller: dc.example.ac.uk
- Linux/UNIX web server: moodle.example.ac.uk
- Active Directory user account for web server service principal: moodlekerb
Install kerberos on moodle.example.ac.uk and enter the following in krb5.conf (by default: /etc/krb5.conf)
[libdefaults] default_realm = EXAMPLE.AC.UK [domain_realm] example.ac.uk = EXAMPLE.AC.UK [realms] EXAMPLE.AC.UK = { admin_server = dc.example.ac.uk kdc = dc.example.ac.uk }: * Test kerberos Issue the following command at the shell prompt: <pre> $> kinit user@EXAMPLE.AC.UK
Where 'user' is an Active Directory account for which you know the password.
Next, issue the following:
$>klist
If all is OK it will list the Kerberos ticket you were granted from the domain controller (KDC)
- Create HTTP service principal for moodle.example.ac.uk
- Create the 'moodlekerb' user account in Active Directory (NOT a machine account) to map to the web server service principal (HTTP/moodle.example.ac.uk@EXAMPLE.AC.UK)
NOTE: moodle.example.ac.uk MUST be the canonical DNS name of the server i.e. an A record (NOT a CNAME). Additionally a valid PTR (reverse DNS) record must exist and match the corresponding A record.
- Use the ktpass.exe utility to map the service principal and create a keytab file
Apache requires a keytab file, which is generated with ktpass.exe on the Windows Active Directory Domain Controller. Unfortunately, this component of Windows Server 2003 SP1 does not function correctly so one must obtain a hot fix: http://support.microsoft.com/kb/919557
Run the following command on the domain controller:
C:\path\to\hotfix\ktpass.exe -princ HTTP/moodle.example.ac.uk@EXAMPLE.AC.UK -mapuser EXAMPLE\moodlekerb -crypto DES-CBC-MD5 +DesOnly +setPass +rndPass -ptype KRB5_NT_PRINCIPAL -out moodle.example.ac.uk.keytab
Copy C:\path\to\hotfix\moodle.example.ac.uk.keytab to the moodle web server and remember the location (/etc/httpd/moodle.example.ac.uk.keytab or similar)
- Configure Apache / mod_auth_kerb
Edit the Apache configuration for the moodle host and add the following directives:
<Directory /path/to/moodle/docs/auth/ldap/> <Files ntlmsso_magic.php> AuthName "Moodle" AuthType Kerberos KrbAuthRealms EXAMPLE.AC.UK KrbServiceName HTTP Krb5Keytab /etc/httpd/moodle.example.ac.uk.keytab KrbMethodNegotiate on KrbMethodK5Passwd on KrbAuthoritative on require valid-user </Files> </Directory>
Configuring IP/Subnet Mask
Subnet masks are based on binary patterns so need a bit of knowledge to understand. The best way to find out what IP/Subnet masks to use is to ask your Network Admin.
- Just type them one after the other, separated by commas. You can use several syntaxes:
- Type the network-number/prefix-length combination. E.g. 192.168.1.0/24
- Type the network 'prefix', ending in a period character. E.g. 192.168.1.
- Type the network address range (this only works for the last address octect). E.g. 192.168.1.1-254
- All the three examples refer to the same subnetwork. So assuming you need to specify the following subnetworks:
- 10.1.0/255.255.0.0
- 10.2.0.0/255.255.0.0
- 172.16.0.0/255.255.0.0
- 192.168.100.0/255.255.255.240
- You can type:
10.1.0.0/16, 10.2.0.0/16, 172.16.0.0/16, 192.168.100.0/28
- or:
10.1.0.0/16, 10.2.0.0/16, 172.16.0.0/16, 192.168.100.240-255
- or even:
10.1., 10.2., 172.16., 192.168.100.0/28
- (the last one cannot be expressed as a network 'prefix' as the netmask does not fall on an octect boundary).
Configuring Domain user credentials format
If you are using Moodle 2.4 and later there is a new setting that lets you configure the format of the domain user credentials, instead of using the old fixed format. The setting is called "Remote username format". If you leave this seting empty, the default DOMAINNAME\username format will be used. You can use the optional %domain% placeholder to specify where the domain name appears, and the mandatory %username% placeholder to specify where the username appears.
Some widely used formats are:
- %domain%\%username% : MS Windows default, contains the domain name, followed by a backlash character, followed by the username.
- %username%@%domain% : This is the same format used by Kerberos (domain name followed by an at sign, followed by the username).
- %domain%/%username% : Some people configure Samba+Winbind to use this format.
- %domain%+%username% : Some people configure Samba+Winbind to use this other format.
- %username% : Only contains the username, with no domain part.
Notes/Tips
- If you are using Firefox, you will need to follow these steps:
- Load Firefox and type about:config in the address box. The configuration settings page should be displayed.
- In the Filter box, type the word "ntlm" to filter the NTLM strings. You should see three settings displayed.
- Double-click on "network.automatic-ntlm-auth.trusted-uris".
- In the box, enter the full URL of your Moodle server. For example
http://moodle.mydomain.com, (the comma is important)
- Close Firefox and restart.
- NTLM seems to not work at all when BASIC authentication is enabled. (this was using the Kerberos method, other ways may work)
- If the account in your AD management console shows like "First Last", you better change the ldap settings parameter 'User Attribute' from its default of {blank} / 'cn' to 'sAMAccountName' as indicated in this post. The reason is that the cn name generally looks like "First Last", once you done the ldap sync, the user name in moodle will be "first last", but IE passes the account of "domain\first.last" to moodle which does not exist in moodle.
To get a domain name for Moodle working on IIS7.5 Windows 2008 R2
Refer to http://support.microsoft.com/kb/896861. Key section listed below.
Click Start, click Run, type regedit, and then click OK.
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New, and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then click Modify.
In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.
Quit Registry Editor, and then restart the IISAdmin service.
Compiling mod_auth_ntlm_winbind on Debian/Ubuntu
You need to install the following packages (and all of their dependencies) by using aptitude, synaptic, etc.:
autoconf apache2-threaded-dev debian-builder
Once you have them installed, open up a text console, go to the directory where you downloaded the mod_auth_ntlm_winbind files an execute the following commands (as a normal user):
autoconf ./configure --with-apxs=/usr/bin/apxs2 --with-apache=/usr/sbin/apache2 make
That should compile it without errors. Then as a user that can run commands as root via sudo, execute the following command from the same directory:
sudo make install
This will create the final mod_auth_ntlm_winbind.so file and install it under /usr/lib/apache2/modules, with the rest of the Apache 2 modules (the size of the file and last modification time shown below may differ from your install):
ls -l /usr/lib/apache2/modules/mod_auth_ntlm_winbind.so -rw-r--r-- 1 root root 20921 2009-02-17 04:27 /usr/lib/apache2/modules/mod_auth_ntlm_winbind.so
See also
- Using Moodle: User authentication forum
- Using Moodle NTLM Authentication forum discussion
- Using Moodle Merging AD NTLM SSO into auth/ldap forum discussion
- Using Moodle Moodle in a DMZ with NTLM forum discussion
- Download the NTLM Authentication Module