Messaging settings

Enabling Messaging

Enabling / disabling messaging site wide

The messaging system in Moodle is enabled by default. It may be disabled by a site administrator in Administration > Site administration > Advanced features > Enable messaging system.

Site administration: Message outputs

Most of the Messaging system default settings are set in Site administration > Plugins > Message output.

Manage Message outputs

There are four default types of output methods for messaging: popup notices, Jabber IM type messages, messages sent as email and mobile notifications

Each of these can be enabled or disabled independently by a site administrator in Administration > Site administration > Plugins > Message outputs > Manage message outputs.

By default Popup and Email are both enabled, though email will only work of course if the site has been properly configured to deliver email. Jabber and Mobile notifications are off by default and need to be configured first.

Popup notification

Has no settings. It can be enabled or disabled. How it appears will depend on some extent to the theme.

Jabber message

Jabber must be configured before use.

(Could someone with working settings fill this out with example?)

• Host - The server to connect to to send jabber message notifications - full hostname (e.g. jabber.org)
• Server - XMPP host ID (can be left empty if the same as Jabber host)
• Username - The user name to use when connecting to the Jabber server
• Password - The password to use when connecting to the Jabber server
• Port - defaults to 5222

Email

SMTP hosts

SMTP stands for Simple Mail Transfer Protocol. The SMTP host is an email relay that will take the email from Moodle and send it to users. You will need to set this only if your server does not allow mail relay. Otherwise, PHP will send out the mail using its built-in mail server. All the email sent by forums and other modules will be sent through this host.

Most SMTP hosts make use of the default port 25 to for listening email traffic. However, occasionally a non-default port is used. In such cases, entering an SMTP host followed by a colon (i.e. :) and the port number should work. For example, if my SMTP host is myemailserver.com and it listens on port 587 or 465 (most common) instead of port 25 I would enter the SMTP host as myemailserver.com:587.

No-reply address

You can specify here the default email address you wish to use as the "From" address where users cannot reply directly to others (eg when a user chooses to keep their address private).

It is possible to check a box to enable 'Always send email from the no-reply address'. This can be used to stop anti-spoofing controls in external mail systems blocking emails. The default setting is 'No'.

SMTP security

If the SMTP server requires a secure connection, the correct protocol type, SSL or TSL, may be set.

Configure HTTPD/SELinux on CentOS/Red Hat (RHEL) 6.2/6.1/6

Most new installations of Centos/Red Hat have SELinux activated and is configured by default, rather strictly. In this state SELinux does not allow Apache (httpd,phpmailer) to use the sendmail function and make any sort of network connection.

If you continue to have problems with sending/authenticating use the getsebool command to find out if SELinux is one of the culprits. When the getsebool command is issued it returns on or off.

Type to check if your Apache is allowed to send mail and make a connection over the network

• getsebool httpd_can_sendmail
• getsebool httpd_can_network_connect

You will receive the values of httpd_can_sendmail and httpd_can_network_connect. Let's assume both options are off:

• httpd_can_sendmail -->off
• httpd_can_network_connect -->off

We need to change the values from off to on by using setsebool. Number 1 = on and 0 = off. Type the following:

• setsebool -P httpd_can_sendmail 1
• setsebool -P httpd_can_network_connect 1

You will not receive a response. You can double check if the setsebool command worked by using getsebool and see if the values changed from -->off to -->on.

Mobile notifications

The administrator can configure the site to push messages to mobile devices. Moodle pushes messages to a messaging server, which then pushes it to Apple or Google depending on the platform the target device is using (iOS or Android).

The default messaging server is a free Airnotifier server maintained by moodle.com which registered sites may use for testing (be aware that all your messages will go via this server). To connect to this, click 'Request access key' and then add it to the Airnotifier access key field. Alternatively, you may install your own private Airnotifier server and use that instead. See https://github.com/dongsheng/airnotifier for details.

Users will need to connect at least once with the latest version of the mobile app to register their phones with the site. Then they can configure their own messaging preferences in Administration > My profile settings > Messaging.

Default message outputs

The user defaults for these are set in Administration > Site administration > Plugins > Message outputs > Default message outputs.

You can specify the default outputs for each type of message that Moodle can send.

Permittedness

You can also set to what degree each type of message is enabled, and whether users are able to change these default settings in their profiles:

• Disallowed - This particular type of message is not allowed at all and users will not see any settings related to them. Message of the chosen type will never be delivered.

• Permitted - Users are permitted or allowed to change the settings. When the user account is created, the new user will inherit the settings the administrator sets here, but will be allowed to change them afterward in their Messaging settings. Messages will be delivered as the user sets them on their own Messaging settings page.

• Forced - Users are not permitted or allowed to change these settings. When the user account is created, the new user will inherit the settings the administrator sets here and will never be allowed to change them. Messages will be delivered for all users as you set them on this page.

Logged in/Offline

You can set whether each of these will be sent when the user is online through the messaging system interface available to users in their profiles, and/or whether each output is sent via email.

Ordering of messaging settings

Because users might have many different messaging options, they are ordered into different components -for example, Forum, Assignment, System, Enrolments etc.

Example of the ordering of message types. (Click to enlarge)

List of message types

Except for Personal messages between users, which refers to the interaction messaging tool on a user profile, the other messages are generated by events in Moodle.

Output Name	Description	Recipients
Assignment notifications	Student has submitted an assignment	Teacher
Warning when your quiz attempt becomes overdue	See Quiz settings	Student
Available update notifications	Notice of new releases of Moodle code	Site administrators
Backup notifications	Automated backup schedule run completed	Site administrators
Badge creator notifications	Notify creator of a badge when it is awarded to someone	Any badge creator (typically Teacher or Manager role)
Badge recipient notifications	Notify recipient of a badge when it is awarded to them	Any badge recipient (typically Student role)
Confirmation of your own quiz submissions	Notice your quiz was successfully submitted	Student
Course creation request approval notification	Notice a requested course has been approved	Defined in Site admin > Courses > Course request > Course request notification
Course creation request notification	Notice a course has been requested - See Course request	Defined in Site admin > Courses > Course request > Course request notification
Course creation request rejection notification	Notice a requested course has been rejected	Defined in Site admin > Courses > Course request > Course request notification
Important errors with the site	Important errors - See also Debugging	Site administrators
Manual enrolment expiry notifications	Notice if Manual enrolment about to expire	Manual enrolees
Self enrolment expiry notifications	Notify users when their enrolment expires	Enroller only, or Enroller & Enrolled user
Lesson essay graded notification	Notify students a teacher has graded a Lesson essay question	Student
Personal messages between users	Using the Messaging interface tool	Authenticated Users
Message to confirm that an inbound message came from you	See Incoming mail configuration	Authenticated Users
Feedback reminder	Feedback non-respondent reminder message	Student feedback activity non-responders
Warning when an inbound message could not be processed	See Incoming mail configuration	Authenticated Users
Confirmation that a message was successfully processed	See Incoming mail configuration	Authenticated Users
Notices about minor problems		Site administrators
Notification of rule subscriptions	Notifications from Event monitoring rules	Site administrators
Subscribed forum posts	Master switch for forum subscription handling	Anyone subscribed to a forum
Feedback notifications	Notices from setting Enable notification of submissions	Teacher, Feedback administrator
Notification of quiz submissions	Message that student has submitted a quiz	Teacher

Other Messaging related settings

Roles and Messaging capabilities

The following capabilities can be applied as permissions to make custom changes to roles affecting messaging.

• course:bulkmessaging - Send a message to many people
• site:readallmessages - Read all messages on site
• site:sendmessage - Send messages to any user
• user:editownmessageprofile - Edit own user messaging profile
• user:editmessageprofile - Edit user messaging profile

User profile settings

Users can receive message alerts for a number of different reasons and can also send and receive instant messages. How a user receives notification of incoming messages can be set in Logged in user menu > Preferences > Messaging.

This brings up a screen with check boxes where users can choose how they wish to be notified both when logged in and logged out. They can choose between a pop up,Jabber message or an email.

Note: The choices a user has on this screen depends on their role and permissions within Moodle. For example, an administrator would see options for notifications about backups or important errors with the site.

An administrator can receive update notifications for both Moodle core code and any contributed plugins installed on the site if the automatic check for available updates is enabled in Administration > Site Administration > Server > Update notifications.

Pop up

When a user is logged into Moodle, the message will pop up from the bottom right corner of the page. The user can choose to read the message immediately or to ignore it. If they choose to ignore it, the message returns until it is read.

Jabber

If the Jabber server has been configured, Jabber messages can be sent.The Jabber ID can be set at the bottom of the screen.

Email

Users cannot by default automatically choose to have notifications sent to a different email address from their official Moodle email. However, the administrator has the option to override this so that users can have an alternative email. This is done from Administration > Site administration > Advanced features and when activated, a box will appear for users to enter another email address.

Note: The 'messagingallowemailoverride' setting does not affect failed log in notifications as they do not go through the messaging system, and will therefore still go to the original email specified.

Mobile notifications

Users have this option if their site is connected to a messaging server and if they have connected with their mobile device to the mobile app.

Prevent non-contacts from messaging me

Non-contacts can be prevented from sending messages by ticking this box in General Settings at the bottom of the screen.