Visa källa för Themes 2.0 creating your first theme

{{Template:Themes}}{{Moodle 2.0}}This document describes how to create a theme for Moodle 2.0. It assumes you have some understanding of how themes within Moodle work as well as a good understanding of HTML and CSS.

===Theme designer mode===

Under normal operation Moodle does several things in the name of performance, one of these is to combine all of the CSS into one file, minimize it, cache it on the server, and then serve it. After the first request the cached version is served to greatly improve page performance. 

What this means for you as a themer? When you make changes they will not be seen immediately. In fact you will need to tell Moodle to rebuild the cache that it is serving.
This isn't practical for designing themes of course so the '''theme designer mode''' was added. When enabled it tells Moodle not to combine or cache the CSS that gets delivered. This has the downside that page load times will take significantly longer, however you will see your changes immediately every time.

Theme designer mode may be enabled via ''Administration > Appearance > Themes > [[Theme settings]]''.

'''Warning''': Internet Explorer versions 6 and 7 have BIG problems when a site attempts to link to more than 31 stylesheets, in which case either a limited number or no styles get applied. Because Moodle sends up all of the CSS all of the time with theme designer mode turned on there is a very high chance you will get more than 31 stylesheets being included. This will, of course, cause major problems for Internet Explorer until theme designer mode is turned off.

==Getting started==

The first thing you need to do is create the directories and files you will be using, the first thing to create is the actual directory for your theme. This should be the name of your theme, in my case it's 'excitement'. The directory should be located within the theme directory of Moodle, ./moodle/theme/excitement/ will be the directory I create.

Now within that directory we can immediately create several files that we know we are going to need. 

So the files that we want to create are:
; config.php :  All of our settings will go here.
; /style/ : This directory will contain all of our stylesheets.
; /style/excitement.css : All of our css will go in here.
; /pix/ : Into this directory we'll put a screen shot of our theme as well as our favicon and any images we use in CSS.
; /layout/ : Our layout files will end up in this directory.
; /layout/standard.php : This will be our one basic layout file.
; /lang/en/ : The file we put here will make our theme name show properly on the Theme Selector page.

So after this setup step you should have a directory structure similar to what is shown below.

[[image:Learn_to_theme_01.jpg]]

==Configuring our theme==

Open config.php in your favourite editor and start by adding the opening PHP tags '''<nowiki><?php</nowiki>'''.

Now we need to add the settings:

<code php>
$THEME->name = 'excitement';
</code>
Very simply this tells Moodle the name of your theme, and if you ever have several config.php files open this will help you identify which one you are looking at.

Next, the parents for this theme.
<code php>
$THEME->parents = array('base');
</code>
This tells Moodle that my new theme ''`excitement`' wants to extend the base theme. 

A theme can extend any number of themes. Rather than creating an entirely new theme and copying all of the CSS, you can simply create a new theme, extend the theme you like and just add the changes you want to your theme. 

Also worth noting is the purpose of the base theme: it provides us with a basic layout and just enough CSS to make everything fall into place.

Now we will tell Moodle about our stylesheets:
<code php>
$THEME->sheets = array('excitement');
</code>

The final thing we need to add into our theme's config.php file is the definition of the layouts for our theme:
<code php>
$THEME->layouts = array(
    'base' => array(
        'file' => 'standard.php',
        'regions' => array(),
    ),
    'standard' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    'course' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post'
    ),
    'coursecategory' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    'incourse' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    'frontpage' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    'admin' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre'),
        'defaultregion' => 'side-pre',
    ),
    'mydashboard' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
        'options' => array('langmenu'=>true),
    ),
    'mypublic' => array(
        'file' => 'standard.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    'login' => array(
        'file' => 'standard.php',
        'regions' => array(),
        'options' => array('langmenu'=>true),
    ),
    'popup' => array(
        'file' => 'standard.php',
        'regions' => array(),
        'options' => array('nofooter'=>true),
    ),
    'frametop' => array(
        'file' => 'standard.php',
        'regions' => array(),
        'options' => array('nofooter'=>true),
    ),
    'maintenance' => array(
        'file' => 'standard.php',
        'regions' => array(),
        'options' => array('nofooter'=>true, 'nonavbar'=>true),
    ),
    'print' => array(
        'file' => 'standard.php',
        'regions' => array(),
        'options' => array('nofooter'=>true, 'nonavbar'=>false),
    ),
);

/** List of javascript files that need to be included on each page */
$THEME->javascripts = array();
$THEME->javascripts_footer = array();

</code>

What you are looking at is the different layouts for our theme. Why are there so many? Because, that is how many there are in Moodle. There is one for every general type of page. With my ''`excitement`'' theme I have chosen to use my own layout. Unless there was a specific reason to do so, normally you would not need to create your own layouts, you could extend the base theme, and use its layouts, meaning you would only have to write CSS to achieve your desired look.

For each layout above, you will notice the following four things are being set:
; file : This is the name of the layout file we want to use, it should always be located in the above themes layout directory. For us this is of course standard.php as we only have one layout file.
; regions : This is an array of block regions that our theme has. Each entry in here can be used to put blocks in when that layout is being used.
; defaultregion : If a layout has regions it should have a default region, this is where blocks get put when first added.
; options : These are special settings, anything that gets put into the options array is available later on when we are writing our layout file.

There are additional settings that can be defined in the config.php file - see [[Development:Themes 2.0|Themes 2.0]] for the full list.


==Configuring the language file==
Open theme_base.php file from '''base/lang/en/theme_base.php'''

Save it as '''excitement/lang/en/theme_excitement.php'''.

Change 
<code php>
$string['pluginname'] = 'Base'; 
</code>
to
<code php>
$string['pluginname'] = 'Excitement';
</code>

After making these changes and perhaps clearing theme caches and/or purging all caches, the new theme name should now show properly in the Theme Selector: ''Site Administration > Appearance > Themes > Theme Selector''

You can also edit the theme description:

<code php>
$string['choosereadme'] = 'Write your theme description here.';
</code>

==Writing the layout file==

The excitement theme has just one layout file.

The downside of this is that I have to make the layout file do everything I want which means I need to make use of some options (as defined in the layouts in config.php). 

The upside is that I only need to maintain one file. 

Other than maintenance, using multiple layout files provides many advantages to real world themes in that you can easily tweak and customise specific layouts to achieve the goals of the organisation using the theme.

So lets start writing standard.php, the layout file for my ''`excitement`'' theme.

===The top of the layout file===

<code php>
<?php
$hassidepre = $PAGE->blocks->region_has_content('side-pre', $OUTPUT);
$hassidepost = $PAGE->blocks->region_has_content('side-post', $OUTPUT);
echo $OUTPUT->doctype(); ?>
<html <?php echo $OUTPUT->htmlattributes() ?>>
<head>
    <title><?php echo $PAGE->title ?></title>
    <?php echo $OUTPUT->standard_head_html() ?>
</head>
</code>

Lets look at the code that goes into this section:
<code php>
<?php
echo $OUTPUT->doctype(); ?>
</code>
This is very important and is required to go at the very top of the page. This tells Moodle to print out the document type tag that is determined by the settings within Moodle.

<code php>
<html <?php echo $OUTPUT->htmlattributes() ?>>
</code>
Here we open the HTML tag and then ask Moodle to print the attributes that should go inside it.

<code php>
    <title><?php echo $PAGE->title ?></title>
</code>
Simply creates the title tag and asks Moodle to fill it in.

<code php>
    <?php echo $OUTPUT->standard_head_html() ?>
</code>
Here we are asking Moodle to print all of the other tags and content that need to go into the head. This includes stylesheets, script tags, and inline JavaScript code.

===The page header===

<code php>
<body id="<?php p($PAGE->bodyid); ?>" class="<?php p($PAGE->bodyclasses); ?>">
<?php echo $OUTPUT->standard_top_of_body_html() ?>
<div id="page">
<?php if ($PAGE->heading || (empty($PAGE->layout_options['nonavbar']) && $PAGE->has_navbar())) { ?>
    <div id="page-header">
        <?php if ($PAGE->heading) { ?>
            <h1 class="headermain"><?php echo $PAGE->heading ?></h1>
            <div class="headermenu"><?php
                echo $OUTPUT->login_info();
                if (!empty($PAGE->layout_options['langmenu'])) {
                    echo $OUTPUT->lang_menu();
                }
                echo $PAGE->headingmenu
            ?></div>
        <?php } ?>
        <?php if (empty($PAGE->layout_options['nonavbar']) && $PAGE->has_navbar()) { ?>
            <div class="navbar clearfix">
                <div class="breadcrumb"><?php echo $OUTPUT->navbar(); ?></div>
                <div class="navbutton"> <?php echo $PAGE->button; ?></div>
            </div>
        <?php } ?>
    </div>
<?php } ?>
</code>

So there is a bit more going on here obviously.

<code php>
<body id="<?php p($PAGE->bodyid); ?>" class="<?php p($PAGE->bodyclasses); ?>">
</code>
Again much like what we did for the opening HTML tag in the head we have started writing the opening body tag and are then asking Moodle to give us the ID we should use for the body tag as well as the classes we should use.

<code php>
<?php echo $OUTPUT->standard_top_of_body_html() ?>
</code>
This very important call writes some critical bits of JavaScript into the page. It should always be located after the body tag as soon as possible.

<code php>
<?php if ($PAGE->heading || (empty($PAGE->layout_options['nonavbar']) && $PAGE->has_navbar())) { ?>
......
<?php } ?>
</code>
Here we are checking whether or not we need to print the header for the page. There are three checks we need to make here:
# '''$PAGE->heading''' : This checks to make sure that there is a heading for the page. This will have been set by the script and normally describes the page in a couple of words.
# '''empty($PAGE->layout_options['nonavbar'])''' : Now this check is looking at the layout options that we set in our config.php file. It is looking to see if the layout set 'nonavbar' => true.
# '''$PAGE->has_navbar()''' The third check is to check with the page whether it has a navigation bar to display.
If either there is a heading for this page or there is a navigation bar to display then we will display a heading.

Leading on from this lets assume that there is a header to print.
<code php>
<?php if ($PAGE->heading) { ?>
    <h1 class="headermain"><?php echo $PAGE->heading ?></h1>
    .....
<?php } ?>
</code>
This line is simply saying if the page has a heading print it. In this case we run the first check above again just to make sute there is a heading, we then open a heading tag that we choose and ask the page to print the heading.

<code php>
<div class="headermenu"><?php
    echo $OUTPUT->login_info();
    if (!empty($PAGE->layout_options['langmenu'])) {
        echo $OUTPUT->lang_menu();
    }
    echo $PAGE->headingmenu
?></div>
</code>
Here we are looking to print the menu and content that you see at the top of the page (usually to the right). We start by getting Moodle to print the login information for the current user. If the user is logged in this will be their name and a link to their profile, if not then it will be a link to login.

Next we check our page options to see whether a language menu should be printed. If in the layout definition within config.php it sets '''langmenu => true''' then we will print the language menu, a drop down box that lets the user change the language that Moodle displays in.

Finally the page also has a heading menu that can be printed. This heading menu is special HTML that the page you are viewing wants to add. It can be anything from drop down boxes to buttons and any number of each.

<code php>
<?php if (empty($PAGE->layout_options['nonavbar']) && $PAGE->has_navbar()) { ?>
    <div class="navbar clearfix">
        <div class="breadcrumb"><?php echo $OUTPUT->navbar(); ?></div>
        <div class="navbutton"> <?php echo $PAGE->button; ?></div>
    </div>
<?php } ?>
</code>
The final part of the header.

Here we want to print the navigation bar for the page if there is one. To find out if there is one we run checks number 2 and 3 again and proceed if they pass.

Assuming there is a header then there are two things that we need to print. The first is the navigation bar. This is a component that the OUTPUT library knows about. The second is a button to shown on the page.

In both cases we can choose to wrap them in a div to make our life as a themer easier.

Well that is it for the header. There is a lot of PHP compared to the other sections of the layout file but it does not change and can be copied and pasted between themes.

===The page content===

I am going with the default two block regions plus the main content.

Because I have based this theme and layout file on the base theme the HTML looks a little intense. This is because it is a floating div layout where the content comes first and then we get the columns (even though one column will be to the left of the content.) Don't worry too much about it. When it comes to writing your own theme you can go about it as you choose.

<code php>
<div id="page-content">
    <div id="region-main-box">
        <div id="region-post-box">
            <div id="region-main-wrap">
                <div id="region-main">
                    <div class="region-content">
                        <?php echo core_renderer::MAIN_CONTENT_TOKEN ?>
                    </div>
                </div>
            </div>
            <?php if ($hassidepre) { ?>
                <div id="region-pre">
                    <div class="region-content">
                        <?php echo $OUTPUT->blocks_for_region('side-pre') ?>
                    </div>
                </div>
                <?php } ?>
                
                <?php if ($hassidepost) { ?>
                <div id="region-post">
                    <div class="region-content">
                        <?php echo $OUTPUT->blocks_for_region('side-post') ?>
                    </div>
                </div>
            <?php } ?>
        </div>
    </div>
</div>
</code>

In regards to PHP this section is very easy. There are only three lines for the whole section one to get the main content and one for each block region.
<code php>
<?php echo core_renderer::MAIN_CONTENT_TOKEN ?>
</code>
This line prints the main content for the page.

<code php>
<?php if ($hassidepre) { ?>
....
<?php } ?>
</code>
These lines of code check the variables we created earlier on to decide whether we should show the pre block region. If you try to display a block region that isn't there or has no content then Moodle will give you an error message so these lines are very important.

For those who get an error message if it is "unknown block region side-pre" or "unknown block region side-post" then this is the issue you are experiencing. Simply add the following lines and all will be fine.

<code php>
<?php echo $OUTPUT->blocks_for_region('side-pre') ?>
</code>
This line gets all of the blocks and more particularly the content for the block region '''side-pre'''. This block region will be displayed to the left of the content.

<code php>
<?php if ($hassidepost) { ?>
....
<?php } ?>
</code>
Again we should make this check for every block region as there are some pages that have no blocks what-so-ever.

<code php>
<?php echo $OUTPUT->blocks_for_region('side-post') ?>
</code>
Here we are getting the other block region '''side-post''' which will be displayed to the right of the content.

===The page footer===
Here we want to print the footer for the page, any content required by Moodle, and then close the last tags.
<code php>
    <?php if (empty($PAGE->layout_options['nofooter'])) { ?>
    <div id="page-footer" class="clearfix">
        <p class="helplink"><?php echo page_doc_link(get_string('moodledocslink')) ?></p>
        <?php
        echo $OUTPUT->login_info();
        echo $OUTPUT->home_link();
        echo $OUTPUT->standard_footer_html();
        ?>
    </div>
    <?php } ?>
</div>
<?php echo $OUTPUT->standard_end_of_body_html() ?>
</body>
</html>
</code>

The section of code is responsible for printing the footer for the page.
<code php>
    <?php if (empty($PAGE->layout_options['nofooter'])) { ?>
    <div id="page-footer" class="clearfix">
        <p class="helplink"><?php echo page_doc_link(get_string('moodledocslink')) ?></p>
        <?php
        echo $OUTPUT->login_info();
        echo $OUTPUT->home_link();
        echo $OUTPUT->standard_footer_html();
        ?>
    </div>
    <?php } ?>
</code>
The first thing we do before printing the footer is check that we actually want to print it. This is done by checking the options for the layout as defined in the config.php file. If '''nofooter => true''' is set the we don't want to print the footer and should skip over this body of code.

Assuming we want to print a footer we proceed to create a div to house its content and then print the bits of the content that will make it up.
There are four things that the typical page footer will want to print:
; echo page_doc_link(get_string('moodledocslink')) : This will print a link to the Moodle.org help page for this particular page.
; echo $OUTPUT->login_info(); : This is the same as at the top of the page and will print the login information for the current user.
; echo $OUTPUT->home_link(); : This prints a link back to the Moodle home page for this site.
; echo $OUTPUT->standard_footer_html(); : This prints special HTML that is determined by the settings for the site. Things such as performance information or debugging will be printed by this line if they are turned on.

And the final line of code for our layout file is:
<code php>
<?php echo $OUTPUT->standard_end_of_body_html(); ?>
</code>
This is one of the most important lines of code in the layout file. It asks Moodle to print any required content into the page, and there will likely be a lot although most of it will not be visual.

It will instead be things such as inline scripts and JavaScript files required to go at the bottom of the page. If you forget this line its likely no JavaScript will work!

We've now written our layout file and it is all set to go. The complete source is below for reference. Remember if you want more practical examples simply look at the layout files located within the layout directory of other themes.

<code php>
<?php
$hassidepre = $PAGE->blocks->region_has_content('side-pre', $OUTPUT);
$hassidepost = $PAGE->blocks->region_has_content('side-post', $OUTPUT);
echo $OUTPUT->doctype() ?>
<html <?php echo $OUTPUT->htmlattributes() ?>>
<head>
    <title><?php echo $PAGE->title; ?></title>
    <link rel="shortcut icon" href="<?php echo $OUTPUT->pix_url('favicon', 'theme')?>" />
    <?php echo $OUTPUT->standard_head_html() ?>
</head>

<body id="<?php p($PAGE->bodyid); ?>" class="<?php p($PAGE->bodyclasses); ?>">
<?php echo $OUTPUT->standard_top_of_body_html() ?>
<div id="page">
<?php if ($PAGE->heading || (empty($PAGE->layout_options['nonavbar']) && $PAGE->has_navbar())) { ?>
    <div id="page-header">
        <?php if ($PAGE->heading) { ?>
        <h1 class="headermain"><?php echo $PAGE->heading ?></h1>
        <div class="headermenu"><?php
            echo $OUTPUT->login_info();
            if (!empty($PAGE->layout_options['langmenu'])) {
                echo $OUTPUT->lang_menu();
            }
            echo $PAGE->headingmenu
        ?></div><?php } ?>
        <?php if (empty($PAGE->layout_options['nonavbar']) && $PAGE->has_navbar()) { ?>
            <div class="navbar clearfix">
                <div class="breadcrumb"><?php echo $OUTPUT->navbar(); ?></div>
                <div class="navbutton"> <?php echo $PAGE->button; ?></div>
            </div>
        <?php } ?>
    </div>
<?php } ?>

    <div id="page-content">
        <div id="region-main-box">
            <div id="region-post-box">
                <div id="region-main-wrap">
                    <div id="region-main">
                        <div class="region-content">
                            <?php echo core_renderer::MAIN_CONTENT_TOKEN ?>
                        </div>
                    </div>
                </div>
                <?php if ($hassidepre) { ?>
                <div id="region-pre">
                    <div class="region-content">
                        <?php echo $OUTPUT->blocks_for_region('side-pre') ?>
                    </div>
                </div>
                <?php } ?>
                
                <?php if ($hassidepost) { ?>
                <div id="region-post">
                    <div class="region-content">
                        <?php echo $OUTPUT->blocks_for_region('side-post') ?>
                    </div>
                </div>
                <?php } ?>
            </div>
        </div>
    </div>

    <?php if (empty($PAGE->layout_options['nofooter'])) { ?>
    <div id="page-footer" class="clearfix">
        <p class="helplink"><?php echo page_doc_link(get_string('moodledocslink')) ?></p>
        <?php
        echo $OUTPUT->login_info();
        echo $OUTPUT->home_link();
        echo $OUTPUT->standard_footer_html();
        ?>
    </div>
    <?php } ?>
</div>
<?php echo $OUTPUT->standard_end_of_body_html() ?>
</body>
</html>
</code>

==Adding some CSS==
With config.php and standard.php both complete the theme is now usable and starting to look like a real theme, however if you change to it using the theme selector you will notice that it still lacks any style.

This of course is where CSS comes in. When writing code Moodle developers are strongly encouraged to not use inline styles anywhere. This is fantastic for us as themers because there is nothing (or at least very little) in Moodle that cannot be styled using CSS.

===Moodle CSS basics===

In Moodle 2.0 all of the CSS for the whole of Moodle is delivered all of the time! This was done for performance reasons. Moodle now reads in all of the CSS, combines it into one file, shrinks it removing any white space, caches it, and then delivers it.

'''What this means for you as a themer?'''

You will need to write good CSS that won't clash with any other CSS within Moodle.

Moodle is so big and complex,there is no way to ensure that classes don't get reused. What we can control however is the classes and id that get added to the body tag for every page. When writing CSS it is highly encouraged to make full use of these body classes, using them will help ensure the CSS you write has the least chance of causing conflicts.

You should also take the time to look at how the Moodle themes use CSS. Look at their use of the body classes and how they separate the CSS for the theme into separate files based on the region of Moodle it applies to.

Check out [[Development:Themes 2.0|Themes 2.0]] for more information about writing good CSS.

===Starting to write excitement.css===

<code css>
a {text-decoration: none;}
.addcoursebutton .singlebutton {text-align: center;}

h1.headermain {color: #fff;}
h2.main {border-bottom: 3px solid #013D6A;color: #013D6A;text-align: center;}
h2.headingblock {font-size: 18pt;margin-top: 0;background-color: #013D6A;color: #FFF;text-align: center;}
#page-header {background-color: #013D6A;}
#page-header .headermenu  {color: #FFF;}
#page-header .headermenu a {color: #FDFF2A;}

.navbar {padding-left: 1em;}
.breadcrumb li {color: #FFF;}
.breadcrumb li a {color: #FFF;}

.block {background-color: #013D6A;}
.block .header .title {color: #FFF;}
.block .header .title .block_action input {background-color: #FFF;}
.block .content {border: 1px solid #000;padding: 5px;background-color: #FFF;}
.block .content .block_tree p {font-size: 80%;}

.block_settings_navigation_tree .content .footer {text-align: center;}
.block_settings_navigation_tree .content .footer .adminsearchform {margin-left: 5%;width: 90%;font-size: 9pt;}
.block_settings_navigation_tree .content .footer .adminsearchform #adminsearchquery {width: 95%;}

.block_calendar_month .content .calendar-controls a {color: #013D6A;font-weight: bold;}
.block_calendar_month .content .minicalendar td {border-color: #FFF;}
.block_calendar_month .content .minicalendar .day {color: #FFF;background-color: #013D6A;}
.block_calendar_month .content .minicalendar .day a {color: #FFF000;}
.block_calendar_month .content .minicalendar .weekdays th {border-width: 0;font-weight: bold;color: #013D6A;}
.block_calendar_month .content .minicalendar .weekdays abbr {border-width: 0;text-decoration: none;}
</code>
[[image:Learn_to_theme_02.jpg|400px|thumb|Excitement theme screenshot]]
This isn't all of the CSS for the theme, but just enough to style the front page when the user is not logged in.
Remember this theme extends the base theme so there is already CSS for layout as well.

Note:
* The CSS is laid out in a single line format. This is done within the core themes for Moodle. It makes it quicker to read the selectors and see what is being styled.
* I have written my selectors to take into account the structure of the HTML (more than just the one tag I want to style). This helps further to reduce the conflicts that I may encounter.
* I use generic classes like ''.sideblock'' only where I want to be generic, as soon as I want to be specific I use the unique classes such as ''.block_calendar_month''

<br style="clear:right;" />

===Using images within CSS===

I will add two image files to the pix directory of my theme:
; /theme/excitement/pix/background.png : This will be the background image for my theme.
; /theme/excitement/pix/gradient.jpg : This will be a gradient I use for the header and headings.
I quickly created both of these images using gimp and simply saved them to the pix directory.
<code css>
html {background-image:url([[pix:theme|background]]);}

h2.headingblock,
#page-header,
.sideblock,
.block_calendar_month .content .minicalendar .day {background-image:url([[pix:theme|gradient]]);background-repeat:repeat-x;background-color: #0273C8;}
</code>
[[image:Learn_to_theme_03.jpg‎|400px|thumb|Excitement theme screenshot]]
The CSS above is the two new rules that I had to write to use my images within CSS.

The first rule sets the background image for the page to background.png

The second rule sets the background for headings, and the sideblocks to use gradient.jpg

You will notice that I did not need to write a path to the image. This is because Moodle has this special syntax that can be used and will be replaced when the CSS is parsed before delivery.
The advantage of using this syntax over writing the path in is that the path may change depending on where you are or what theme is being used.

Other themers may choose to extend your theme with their own; if you use this syntax then all they need to do to override the image is to create one with the same name in their themes directory.

You will also notice that I don't need to add the image files extension. This is because Moodle is smart enough to work out what extension the file uses. It also allows themers to override images with different formats.

<br style="clear:right" />
The following is the complete CSS for my theme:
<div style="overflow:auto;height:860px;">
<code css>
a {text-decoration: none;}
.addcoursebutton .singlebutton {text-align: center;}

h1.headermain {color: #fff;}
h2.main {border-bottom: 3px solid #013D6A;color: #013D6A;text-align: center;}
h2.headingblock {font-size: 18pt;margin-top: 0;background-color: #013D6A;color: #FFF;text-align: center;}
#page-header {background-color: #013D6A;border-bottom:5px solid #013D6A;}
#page-header .headermenu  {color: #FFF;}
#page-header .headermenu a {color: #FDFF2A;}

.sideblock {background-color: #013D6A;}
.sideblock .header .title {color: #FFF;}
.sideblock .header .title .block_action input {background-color: #FFF;}
.sideblock .content {border: 1px solid #000;padding: 5px;background-color: #FFF;}
.sideblock .content .block_tree p {font-size: 80%;}

.block_settings_navigation_tree .content .footer {text-align: center;}
.block_settings_navigation_tree .content .footer .adminsearchform {margin-left: 5%;width: 90%;font-size: 9pt;}
.block_settings_navigation_tree .content .footer .adminsearchform #adminsearchquery {width: 95%;}

.block_calendar_month .content .calendar-controls a {color: #013D6A;font-weight: bold;}
.block_calendar_month .content .minicalendar td {border-color: #FFF;}
.block_calendar_month .content .minicalendar .day {color: #FFF;background-color: #013D6A;}
.block_calendar_month .content .minicalendar .day a {color: #FFF000;}
.block_calendar_month .content .minicalendar .weekdays th {border-width: 0;font-weight: bold;color: #013D6A;}
.block_calendar_month .content .minicalendar .weekdays abbr {border-width: 0;text-decoration: none;}

html {background-image:url([[pix:theme|background]]);}

h2.headingblock,
#page-header,
.sideblock,
.block_calendar_month .content .minicalendar .day {background-image:url([[pix:theme|gradient]]);
   background-repeat:repeat-x;background-color: #0273C8;}
</code>
</div>

==Adding a screenshot and favicon==
The final thing to do at this point is add both a screenshot for this theme as well as a favicon for it.
The screenshot will be shown in the theme selector screen and should be named ''screenshot.jpg''.
The favicon will be used when someone bookmarks this page.
Both images should be located in your themes pix directory as follows:
* /theme/excitement/pix/screenshot.jpg
* /theme/excitement/pix/favicon.ico

In the case of my theme I have taken a screenshot and added it to that directory, and because I don't really want to do anything special with the favicon I have copied it from /theme/base/pix/favicon.ico so that at least it will be recognisable as Moodle.

==See also==
* [[Development:Themes 2.0]]
* [[Development:Themes 2.0 overriding a renderer]]

[[Category:Themes]]
[[es:Desarollo:Temas 2.0 creando tu primer tema]]