Oppitunnin luominen (asetukset)
KESKENERÄINEN SIVU
Tällä sivulla esitetään toimenpiteet, joilla luodaan tyhjä oppitunti.
Näin lisäät oppitunnin kurssisivulle:
- Valitse Muokkaustila päälle.
- Valitse Lisää aktiviteetti tai aineisto. Jos sitä ei ole saatavana, avaa Lisää aktiviteetti valikko.
- Valitse listasta Oppitunti
Saat kaikki asetukset näkyviin valitsemalla avautuvan sivun oikeassa yläreunassa Näytä kaikki.
Yleiset
Nimi: Oppitunnin nimi toimii kurssisivulla linkkinä. Käytä nimeä, joka kertoo jotain oppitunnin sisällöstä tai tarkoituksesta.
Kuvaus Kirjoita oppitunnin kuvaus.
Näytä kuvaus kurssisivulla Jos tämä on valittuna, kuvaus näkyy kurssisivulla oppitunnin nimen alla.
Näkyvyyteen liittyvät asetukset
(Nämä asetukset ovat oletusarvoisesti piilotettuina.)
Avaa tiedosto ponnahdusikkunaan:
Valitse näytettävä tiedosto, jos haluat oppitunnin alussa näyttää jotain ponnahdusikkunassa. Tarvittaessa jokaisella oppitunnin sivulla näytetään linkki ponnahdusikkunan avaamiseen uudelleen.
Etenemispalkki: Jos tämä on käytössä, oppitunnin sivujen alareunassa näytetään edistymistä seuraava prosenttipalkki.
- Jos oppitunti sisältää vain sisältösivuja eikä lainkaan kysymyssivuja ja opiskelija menee oppituntiin uudestaan, etenemispalkki näyttää alusta asti 100%.
- Jos oppitunti sisältää kysymyssivuja ja uusinnat on asetuksissa sallittu, etenemispalkki alkaa uusinnoissa 0%:sta..
- Etenemispalkki toimii oikein vain oppitunneissa, joissa eteneminen on suoraviivaista: Sivu 1 -> Sivu 2 -> jne -> Loppu. Se ei välttämättä näytä oikeaa tilannetta, jos mahdolliset etenemisreitit ovat monimutkaisia.
Näytä tähän mennessä kertyneet pisteet näyttää opiskelijalle hänen saavuttamansa pisteet jo oppitunnin aikana.
Näytä vasen valikko Valitse tämä, jos haluat näyttää opiskelijoille listan sisältösivuista. Vain ne sivut näytetään, joiden asetuksisa on valittu Näytä vasemmassa valikossa?. Kysymyssivuja ei näytetä.
Näytä valikko kun arvosana on suurempi kuin Tämä asetus määrittelee, täytyykö opiskelijan saada tietty arvosana ennen kuin hän näkee vasemman reunan valikon. Opiskelijan on ensin käytävä oppitunti läpi ilman valikkoa. Vaaditun arvosanan saatuaan hän voi käyttää vasemmanpuoleista valikkoa katsoakseen oppituntia uudelleen.
Diaesitys: Näytetäänkö oppitunti diaesityksenä? Diaesitysten korkeus, leveys ja taustaväri määritetään ylläpitäjän asetuksissa: Sivuston hallinta > Moduulit > Aktiviteettimoduulit > Oppitunti.
Vastausten maksimimäärä
Maximum Number of Answers
Here you can set the default number of selection boxes available when you add or edit a question or content page. For instance, if you are only going to use Multiple Choice questions with 3 answers in your lesson, you might select 3. You can change the default here at any time to display more or less question answers or content choices.
- Note: This only impacts the editing screen. Changing from 4 to 2 will not remove or hide any answers previously entered from the student.
Use default feedback
Every Moodle site has a standard response (feedback) when a student selects a correct or wrong answer in a lesson. Select "No" if you only what you put as a response for a specific question's answer to display. In this case, when you leave the response to a question blank, the student will not see any comment about their answer. The typical Moodle standard responses are: "That's the correct answer" or "That's the wrong answer".
Link to next activity
Choose this to give students a link to another activity when they reach the end of the lesson. (Note: this can also be achieved using Conditional activities)
Availability
(These settings are collapsed by default)
Available from/Deadline
Here you can set a start and end date and time for your Lesson.
Time limit
This allows you to set a time limit on the lesson which can now be seconds, minutes, hours, days or weeks. Students will see a countdown counter in a block as they work.
Tiedosto:lessontimeremaining.png
The timer does not stop them doing the lesson when the time is up, but correct answers are no longer scored.
Password protected lesson
- Change to "Yes" and enter the password if you want students only to access it when they know the password.
Prerequisite lesson
- Note: You will only see this setting if you have a course with prerequisite lessons upgraded from an earlier version of Moodle.
- You will see a warning that prerequisites are due to be removed completely.
- Please use access restrictions instead. See Conditional activities for more information.
Flow control
(These settings are collapsed by default)
Allow Student Review
This puts a "Review Lesson" button on the last screen of the lesson to encourage the students to navigate through the lesson again from the start.
- Note that the students will not be able to change their answers, only view them.
Provide option to try a question again
- This displays a button after an incorrectly answered question so that the student can try again (but not get credit for it)
- TIP: Leave this off if you are using essay questions.
Maximum Number of Attempts
- Decide here how many times you want students to be able to attempt each question. When they reach the maximum, they will be taken automatically to the next page.
Note: this setting works in combination with the above setting, or independently.
- When 'provide an option to try again' is set to No, students will be able to retake the question as many times as it is set here, with a score penalty.
- When 'provide an option to try again' is set to Yes, then students will be able to retake the question as many times as it set here without a score penalty. In this case an extra dialogue appears.
Consequently when the relevant jump 'this page' is used in wrong answer while the 'provide an option to try again' is set to No and 'maximum number of attempts' is set to 1, a student that will answer wrongly will be moved into the next page, since he/she has the change to try the question just once.
Tip: Ensure you check lesson using a real student account, as the teacher preview or the 'switch role to student' may not give you the exact picture.
Action after a Correct Answer
Choose here where you want a student to be sent to if they get a question right. See Using Lesson for more details on this setting. The options are:
- the next part of the Lesson (default setting)
- a random, unexpected page
- a random page which they have not yet answered.
Number of pages to show
You only need this if you have set "Action after a correct answer" to show an unseen or unanswered page. Otherwise, all pages will be seen
Grade
(These settings are collapsed by default.)
Set a grade and grade category here, along with a "Grade to pass" which may be connected with Activity completion and Conditional activities such that a student will not be able to access a follow up activity until they have obtained the required grade in the lesson.
Practice lesson
Practice lessons are now saved; this means they will appear in the reports .You must enable the "Retakes allowed" setting if you want students to be able to attempt a practice lesson several times.
Note: If you are upgrading from an earlier version, be aware that all practice lessons will have " Re-takes allowed" set to "Yes" . If you are restoring a practice lesson made before this change, you may need to modify the "Re-takes allowed" setting if needed.
Custom Scoring
Use this to give a particular number score (negative or positive) to each answer
Re-takes allowed
Choose this if you want your students to be able to do the lesson more than once.
- Note that this setting only applies to lessons containing Question pages. Lessons consisting only of Content pages can be re-taken even if 'Re-takes allowed' is set to No.
Handling of re-take
If you allow your students to re-take the lesson, then decide here if the grade for all lesson attempts is the mean or the maximum.
- Note that the Question Analysis always uses the answers from the first tries of the lesson. Re-takes by students are ignored.
Minimum Number of Questions
Set here the minimum number of questions that will be used to calculate a student's score. Students will be told how many they have answered and how many more they need to answer.
- If you are using Content pages, then set this to 0.
- If you use this setting, then add some explanatory text at the start of the lesson so the student knows how many questions they must answer as a minimum. (They may answer more.
Common module settings
(These settings are collapsed by default.)
Restrict access/Activity completion
(These settings are collapsed by default)
- The Restrict access and Activity completion settings are visible if Conditional activities and Activity completion have been enabled in the site and the course.
- Note that in addition to the standard activity completion conditions, the Lesson also has 'Require end reached' and 'Require time spent' criteria .
- To learn more about the Lesson completion conditions, see Activity completion settings.
User and group overrides
When a lesson has been created, it is possible to overrride certain settings for individuals and groups. The settings for this are located in the Lesson administration block:
It is possible to override passwords, availability/deadline, time limits and question retries and lesson retakes. Selecting one of the options, for example 'User' will display a button to click. From the next screen you can choose the user or group to override and the settings you wish to override:
Tiedosto:lessonoverrideuser.png
When the override is saved, it is displayed on a screen along with any other overrides previously set:
Tiedosto:lessonoverrideexamples.png
Site administration settings
The lesson module has additional settings which may be changed by an administrator in Administration > Site administration > Plugins > Activity modules > Lesson.
Slideshow width
Sets the width of the slideshow only when this feature is enabled in a Lesson's "Change settings".
- Variable name: lesson_slideshowwidth, Default 640.
Slideshow height
Sets the height of the slideshow only when this feature is enabled in a Lesson's "Change settings".
- Variable name: lesson_slideshowheight, Default 480.
Slideshow background colour
Background colour to for the slideshow if it is enabled.
- Variable name: lesson_slideshowbgcolor, Default #FFFFFF.
Popup window width
Sets the width of the popup displayed for a linked media file
- Variable name: lesson_mediawidth, Default 640.
Popup window height
Sets the height of the popup displayed for a linked media file
- Variable name: lesson_mediaheight, Default 480.
Show close button:
Displays a close button as part of the popup generated for a linked media file
- Variable name: lesson_mediaclose, Default No.
Maximum number of answers
Default Lesson activity maximum number answers per question and choices per content page for the site.
- Variable name: lesson_maxanswers, Default: 4.
Action after correct answer
The default action to take after a correct answer
- Variable name: lesson_defaultnextpage, Default: Normal - follow lesson path
Katso myös
- Moodle 2.x Lesson (part 1) MoodleBites video on YouTube
- Moodle 2.x Lesson (part 2) MoodleBites video on YouTube
- Moodle 2.x Lesson (part 3) MoodleBites video on YouTube