View source for Development:Themes 2.0 adding a settings page

{{Template:Themes}}{{Moodle 2.0}}This document looks at how to create a settings page for your theme and how to make use of those settings within the CSS and layout files for your theme.

This is a pretty advanced topic and will require that you have at least an intermediate knowledge of PHP, CSS, and development in general.

==Before we begin==
[[Image:Theme.settings.page.03.png|350px|thumb|Our end goal. The settings page.]]
[[Image:Theme.settings.page.10.png|350px|thumb|And what it can do.]]
There is a huge body of knowledge that we must cover in following through this document and as such I think the best way to write this is as a tutorial.

My intentions for this tutorial are to replicate the standard theme but with a settings page that allows the administrator to set a background colour, set a logo to use with the page, and probably several other minor settings to change the way in which the theme is displayed.


I will start this tutorial by creating a new theme which will be largely a copy/paste of the current standard theme. I expect that anyone working through this tutorial has previously read the tutorial I wrote on [[Development:Themes 2.0 creating your first theme|creating your first theme]]. If you haven't go read it now because I'm not going to go into much detail until we get to the actual process of customising the theme and introducing the settings page.

So before we finally get this started please ensure you can check off everything on the following requirements list.
* Have a Moodle installation that has already been installed and configured and is ready to use.
* Have full read/write access to that installation.
* Be prepared to delete that installation at the end of this... we will destroy it!
* Have a development environment prepared and ready to use. This includes:
** Your favourite editor installed, running, and pointed at the themes directory of your installation.
** Your browser open and your site visible.
** A bottomless coffee pot... decaf won't help you with this one.
* Have set the following settings:
** '''themedesignermode''' if you don't know what this is please read the [[Development:Themes 2.0 creating your first theme|creating your first theme]] tutorial.
** '''allowthemechangeonurl''' turn this on, it allows you to change themes on the URL and is very handy when developing themes. ''Site Administration > Appearance > Themes > Theme settings''
** '''langstringcache''' if you don't turn this off you won't see your strings when they are added. ''Site Administration > Language > Language settings''
* And finally an insane ambition to create a customisable theme.

For those interested the theme that I create throughout this tutorial can be downloaded from the forum post in which I announce this document: http://moodle.org/mod/forum/discuss.php?d=152053
<br style="clear:right;" />

==Our goals for this tutorial==
The following is just a list goals that I hope to achieve during this tutorial. They are laid out here so that I can easily refer back to them and so that you can easily find them.
# Create a new theme called '''demystified''' based upon the standard theme within Moodle 2.0.
# Make some minor changes to that theme to allow us to more easily see what is going on.
# Create a settings page for the demystified theme.
# Add several settings to our settings page.
# Use some of those settings to alter our CSS.
# Use the rest of those settings within our layout file..
# Discuss the good, the bad, and limits of what we have just created.

So I can see you are all very excited about this point and that you would love to know what settings we are going to create; So here they are:

A setting to ...
* change the background colour (CSS).
* set the path to an image that we will use as a logo on all pages (Layout files).
* override the width of the block regions (CSS).
* allow a note to be added to the footer of all pages (Layout files).
* allow custom CSS to be written to do anything the user wants. (CSS)

==Creating the demystified theme==
Before we start here I want to remind you that I am going to look at this only briefly as I am making the assumption that you have read the [[Development:Themes 2.0 creating your first theme|creating your first theme]] tutorial.

Well lets get into it....

The first thing we need to do is create a directory for our theme which we will call demystified. 

So within your Moodle directory create the following folder '''moodle/theme/demystified'''. At the same time you can also create the following files and folders which we will get to soon.
* The file '''moodle/theme/demystified/config.php''' for our config information.
* The directory '''moodle/theme/demystified/layout''' for our layout files.
* The directory '''moodle/theme/demystified/style''' for our css files.
* The file '''moodle/theme/demystified/style/core.css''' which will contain our special CSS.

Next we will copy the layout files from the base theme to our new theme demystified. We are basing the demystified theme on the standard theme however that doesn't use it's own layout files it uses the base theme's layout files so those are the ones we want. 

The reason that we are coping these layout files is that later on in this tutorial we will be modifying them to make use of our new settings... so copy all of the layout files from '''moodle/theme/base/layout''' to '''moodle/theme/demystified/layout'''.

There should be three files that you just copied:
# embedded.php
# frontpage.php
# general.php

Now we need to populate demystified/config.php with the settings for our new theme. They are as follows:
<code php>
$THEME->name = 'demystified';
</code>
Simply sets the name of our theme.

<code php>
$THEME->parents = array('standard','base');
</code>
This theme is extending both the standard theme and the base theme. Remember when extending a theme you also need to extend its parents or things might not work correctly.

<code php>
$THEME->sheets = array('core');
</code>
This tells our theme that we want to use the file '''demystified/style/core.css''' with this theme.

<div style="height:300px;overflow-y:scroll;">
<code php>
$THEME->layouts = array(
    // Most backwards compatible layout without the blocks - this is the layout used by default
    'base' => array(
        'file' => 'general.php',
        'regions' => array(),
    ),
    // Standard layout with blocks, this is recommended for most pages with general information
    'standard' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // Main course page
    'course' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
        'options' => array('langmenu'=>true),
    ),
    'coursecategory' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // part of course, typical for modules - default page layout if $cm specified in require_login()
    'incourse' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // The site home page.
    'frontpage' => array(
        'file' => 'frontpage.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // Server administration scripts.
    'admin' => array(
        'file' => 'general.php',
        'regions' => array('side-pre'),
        'defaultregion' => 'side-pre',
    ),
    // My dashboard page
    'mydashboard' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
        'options' => array('langmenu'=>true),
    ),
    // My public page
    'mypublic' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    'login' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('langmenu'=>true),
    ),

    // Pages that appear in pop-up windows - no navigation, no blocks, no header.
    'popup' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('nofooter'=>true, 'nonavbar'=>true, 'nocustommenu'=>true),
    ),
    // No blocks and minimal footer - used for legacy frame layouts only!
    'frametop' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('nofooter'=>true),
    ),
    // Embeded pages, like iframe/object embeded in moodleform - it needs as much space as possible
    'embedded' => array(
        'file' => 'embedded.php',
        'regions' => array(),
        'options' => array('nofooter'=>true, 'nonavbar'=>true, 'nocustommenu'=>true),
    ),
    // Used during upgrade and install, and for the 'This site is undergoing maintenance' message.
    // This must not have any blocks, and it is good idea if it does not have links to
    // other places - for example there should not be a home link in the footer...
    'maintenance' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('noblocks'=>true, 'nofooter'=>true, 'nonavbar'=>true, 'nocustommenu'=>true),
    ),
);
</code>
</div>
Now that all looks very complicated however its really not too bad as it is just copied from the base theme's config.php file. We can do this because we copied the layout files from the base theme to begin with and for the time being there are no changes that we wish to make. Simply open up '''theme/base/config.php''' and copy the layouts from there.

And that is it. The config.php file for our demystified theme is complete. The full source is shown below:
<div style="height:300px;overflow-y:scroll;">
<code php>
<?php

// This file is part of Moodle - http://moodle.org/
//
// Moodle is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// Moodle is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with Moodle.  If not, see <http://www.gnu.org/licenses/>.

/**
 * The demystified theme config file
 *
 * This theme was created to document the process of adding a settings page to a theme
 *
 * @copyright 2010 Sam Hemelryk
 * @license   http://www.gnu.org/copyleft/gpl.html GNU GPL v3 or later
 */

// The name of our theme
$THEME->name = 'demystified';

// The other themes this theme extends
$THEME->parents = array('standard','base');

// The CSS files this theme uses (located in the style directory)
$THEME->sheets = array('core');

// The layout definitions for this theme
$THEME->layouts = array(
    // Most backwards compatible layout without the blocks - this is the layout used by default
    'base' => array(
        'file' => 'general.php',
        'regions' => array(),
    ),
    // Standard layout with blocks, this is recommended for most pages with general information
    'standard' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // Main course page
    'course' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
        'options' => array('langmenu'=>true),
    ),
    'coursecategory' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // part of course, typical for modules - default page layout if $cm specified in require_login()
    'incourse' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // The site home page.
    'frontpage' => array(
        'file' => 'frontpage.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    // Server administration scripts.
    'admin' => array(
        'file' => 'general.php',
        'regions' => array('side-pre'),
        'defaultregion' => 'side-pre',
    ),
    // My dashboard page
    'mydashboard' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
        'options' => array('langmenu'=>true),
    ),
    // My public page
    'mypublic' => array(
        'file' => 'general.php',
        'regions' => array('side-pre', 'side-post'),
        'defaultregion' => 'side-post',
    ),
    'login' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('langmenu'=>true),
    ),

    // Pages that appear in pop-up windows - no navigation, no blocks, no header.
    'popup' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('nofooter'=>true, 'nonavbar'=>true, 'nocustommenu'=>true),
    ),
    // No blocks and minimal footer - used for legacy frame layouts only!
    'frametop' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('nofooter'=>true),
    ),
    // Embeded pages, like iframe/object embeded in moodleform - it needs as much space as possible
    'embedded' => array(
        'file' => 'embedded.php',
        'regions' => array(),
        'options' => array('nofooter'=>true, 'nonavbar'=>true, 'nocustommenu'=>true),
    ),
    // Used during upgrade and install, and for the 'This site is undergoing maintenance' message.
    // This must not have any blocks, and it is good idea if it does not have links to
    // other places - for example there should not be a home link in the footer...
    'maintenance' => array(
        'file' => 'general.php',
        'regions' => array(),
        'options' => array('noblocks'=>true, 'nofooter'=>true, 'nonavbar'=>true, 'nocustommenu'=>true),
    ),
);
</code>
</div>

The screenshot below shows both the directory structure we have now created and the theme presently.

[[Image:Theme.settings.page.01.png]]

To view the theme so far open you browser and enter the URL of your site followed by '''?theme=demystified'''. You should see the theme that we just created which will look exactly like the base standard theme.

The final thing that we want to do is add a little bit of CSS to the demystified theme that will both visually set this theme apart from the standard theme and second build a the base which our settings can later extend.

I added the following snippet of CSS to the file '''demystified/style/core.css'''.
<code css>
html {background-color:#DDD;}
body {margin:30px;padding:0;border:1px solid #333;border-width:0 10px 0 10px;background-color:#333;}
body #page {background-color:#FFF;position:relative;top:-10px;}
.block .header {background-image:none;background-color:#0C5CAC;border:1px solid #0C5CAC;color:#FFF;}
.block {border-color:#4BA7FF;background-color:#DDEEFF;}
.block .content {background-color:#F1F8FF;}
a:link,
a:visited {color:#0C5CAC;}
a:hover {color:#C77500;}
#page #page-header {background-color:#0C5CAC;margin:0;padding:0;width:100%;color:#fff;}
#page #page-header a:link, #page #page-header a:visited {color:#FFAC02}
#page #page-header .navbar, #page #page-header .navbar a:link, #page #page-header .navbar a:visited {color:#0C5CAC;}
</code>

The CSS that we have just added to our theme sets a couple of colours on the front page. Presently this is the only CSS I will add, I know it isn't complete by any means but it achieves it's purpose as the screenshot below illustrates.

[[Image:Theme.settings.page.02.png|715px|thumb|left|The newly styles demystified theme]]<br style="clear:both;" />

And with that I will move on to the real purpose of this tutorial, creating the settings page

==Setting up the settings page==
With the demystified theme set up it is time to create the settings page. This is where the real PHP fun begins.

For those of you who happen to be familiar with development of modules, blocks or other plugin types you have probably encountered settings pages before and this is not going to be any different.

However for those who haven't which I imagine is most of you this is going to be quite a challenge. I will try to walk through this step by step however if at any point you get stuck don't hesitate to ask in the forums as I imagine you will get a speedy response.

===How settings pages work in Moodle===
Settings pages can be used by nearly every plugin type, of which themes is of course one. The way in which it all works isn't too tricky to understand. 

All of the settings for Moodle can be configured through the administrator interfaces when logged in. I am sure that everyone here has seen those pages and has changed a setting or two before so you will all know what I am talking about. Well the settings page for a theme is no different. It will be shown in the administration pages tree under '''Appearance > Themes''' and all we have to do is tell Moodle what settings there are.

This is done by creating a settings.php file within our theme into which we will add code that tells Moodle about the settings we want to add/use.

When telling Moodle about each setting we are simply creating a new ''admin_setting'' instance of the type we want and the properties we want and then adding it to our settings page.

There is really not much more too it at this level. Things can get very complex very fast so the best thing we can do now is start creating our settings.php file for the demystified theme and see where it leads us.

===Creating the settings page===
So as mentioned before we need a settings.php file which we will create now. To begin with create the file '''theme/demystified/settings.php''' and open it in your favourite editor so its ready to go.

Before we start adding code however lets just remember the settings that we want to create:
* change the background colour (CSS).
* set the path to an image that we will use as a logo on all pages (Layout files).
* override the width of the block regions (CSS).
* allow a note to be added to the footer of all pages (Layout files).
* allow custom CSS to be written to do anything the user wants. (CSS)

Alright.

Now thinking about this the first setting is as basic as it gets, all we need is a text box that the user can type a colour into.

The second is to allow a logo to be used in the header of each page. What we want here is a path but should it be a physical path e.g. C:/path/to/image.png or should it be a web path e.g. <nowiki>http://mysite.com/path/to/image.png</nowiki>?
For the purpose of this tutorial I am going to go with a web path because it is going to be easier to code and will hopefully be a little easier to understand to begin with.

The third setting is a little more complex. For this I want a drop down box with some specific widths that the administrator can select.

The forth and the fifth settings are both pretty straight forward, there we want a textarea into which the user can enter what ever they want and we will do something useful with it.

Now that we have an understanding about the settings we wish to define pull up your editor and lets start coding....

<code php>
<?php

/**
 * Settings for the demystified theme
 */

$temp = new admin_settingpage('theme_demystified', get_string('configtitle','theme_demystified'));
</code>
This is the first bit of code we must enter, the first line is of course just the opening php tag, secondly we have a comment that describes this file, and then we get create a new '''admin_settingspage object'''.

This admin_settingspage object that we have just created is a representation of our settings page and is the what we add our new settings to. When creating it we give it two arguments, first the name of the page which is in this case '''theme_''themename''''' and the title for the page which we get with the get_string method.

At the moment I'm not going to worry about adding the string, we will get to that later once we have defined all of our settings.

====Background colour====

With the page now created as ''$temp'' lets add our first setting: Background colour.

<code php>
// Background colour setting
$name = 'theme_demystified/backgroundcolor';
$title = get_string('backgroundcolor','theme_demystified');
$description = get_string('backgroundcolordesc', 'theme_demystified');
$default = '#DDD';
$setting = new admin_setting_configtext($name, $title, $description, $default, PARAM_CLEAN, 12);
$temp->add($setting);
</code>
Thankfully this isn't as difficult as it initially looks.

The first line of code is creating a variable for the name of the background colour setting. In this case it is '''theme_demystified/backgroundcolor'''. 

The name is very important, for the setting to be usable we have to follow a strict naming convention. '''theme_''themename''/''settingname''''' where '''''themename''''' is the name of the theme the setting belongs to and '''''settingname''''' is the name for the setting by which we will use it.

The second line of code creates a variable that contains the title of the setting. This is what the user sees to the right of the setting on the settings page and should be a short description of the setting. Here we are again using the ''get_string'' method so we will need to remember to add that string later on.

The third line of code sets the description. This should describe what the setting does or how it works and again we will use the get_string method.

The fourth line creates a variable that will be used as the default value for the setting. Because this setting is a colour we want an HTML colour to be the default value.

The fifth line is where we put it all together. Here we create a new '''admin_setting_configtext''' object. This object will represent the background colour setting.

When we create it we need to give it 6 different things.
# The name of the setting. In this case we have a variable '''$name'''.
# The title for this setting. We used the variable '''$title'''.
# The description of the setting '''$description'''.
# The default value for the setting. '''$default''' is the variable this.
# The type of value we want the user to enter. For this we have used PARAM_CLEAN which tells Moodle to get rid of any nasties from what the user enters.
# The size of the field. In our case 12 characters will be plenty.

The sixth and final line of code adds our newly created setting to the administration page we created earlier.

That is it we have successfully created and added our first setting, however there are several more to settings to do, and there are a couple of important things that you need to be aware of before we move on.

First: There are several different types of settings that you can create and add to a page, and each one may differ in what they need you to give them. In this case it was name, title, description, default, type, and size. However other settings will likely require different things. Smart editors like Netbeans or Eclipse can tell you what is required, otherwise you will need to research it.

Second: Normally settings are declared on one line as follows:
<code php>
$temp->add(new admin_setting_configtext('theme_demystified/backgroundcolor', get_string('backgroundcolor','theme_demystified'), get_string('backgroundcolordesc', 'theme_demystified'), '#DDD', PARAM_CLEAN, 12));
</code>
While this is structurally identical as all we have done is move everything onto one line and do away with the variables it is a little harder to read when you are learning all of this.

====The logo file====
Time to create the second setting that will allow the user to enter a URL to an image they wish to use as the logo on their site.
<code php>
// Logo file setting
$name = 'theme_demystified/logo';
$title = get_string('logo','theme_demystified');
$description = get_string('logodesc', 'theme_demystified');
$setting = new admin_setting_configtext($name, $title, $description, '', PARAM_URL);
$temp->add($setting);
</code>
The first thing that you will notice about this setting that it is very similar to the first setting, in fact all we have changed is the name, title, description, and default value. We have however changed the value type from PARAM_CLEAN to PARAM_URL, this makes sure the user enters a URL. You will also notice that for this one we don't set a size for the field as we have no idea how long the URL will be.

====Block region width====
The third setting should allow the user to set a width for the block regions that will be used as columns.

For this setting I want to do something a little different from the previous two, here I want to use a select box so that the user selects a width for the column from a list I provide.
<code php>
// Block region width
$name = 'theme_demystified/regionwidth';
$title = get_string('regionwidth','theme_demystified');
$description = get_string('regionwidthdesc', 'theme_demystified');
$default = 200;
$choices = array(150=>'150px', 170=>'170px', 200=>'200px', 240=>'240px', 290=>'290px', 350=>'350px', 420=>'420px');
$setting = new admin_setting_configselect($name, $title, $description, $default, $choices);
$temp->add($setting);
</code>
So looking at the code: The first four lines you will recognise. $name, $title, $description, and $default are all being set.

The fifth line of code however introduces something new. Of course in order to have a select box we have to have options, in this case we have an array of options stored in the variable $choices.

The array of options is constructed of a collection of '''''value''' => '''label''''' pairs. Notice how we don't add '''px''' to the value. This is is very intentional as later on I need to do a little bit of math with that value so we need it to be a number.

The lines after should look familiar again, the only difference being that instead of a ''admin_setting_configtext'' setting we have created a ''admin_setting_configselect'' for which we must give the choices for the select box as the fifth argument.

Woohoo, we've just created our first select box setting.

====Foot note====
Now to create the foot note setting. Here we want the user to be able to enter some arbitrary text that will be used in the footer of the page. For this I want the user to be able to enter some HTML so I will create an editor setting.
<code php>
// Foot note setting
$name = 'theme_demystified/footnote';
$title = get_string('footnote','theme_demystified');
$description = get_string('footnotedesc', 'theme_demystified');
$setting = new admin_setting_confightmleditor($name, $title, $description, '');
$temp->add($setting);
</code>
How simple is that!

It is just about identical to the first two settings except that for this we have created a ''admin_setting_confightmleditor'' setting rather than a text setting.

Note: You can also set the columns and rows for the editor setting using the fifth and sixth arguments.

====Custom CSS====
The final setting is to allow the user to add some custom CSS to the theme that will be used on every page. I want this to be a plain textarea into which the user can enter CSS.
<code php>
// Custom CSS file
$name = 'theme_demystified/customcss';
$title = get_string('customcss','theme_demystified');
$description = get_string('customcssdesc', 'theme_demystified');
$setting = new admin_setting_configtextarea($name, $title, $description, '');
$temp->add($setting);
</code>
Just like the editor or text settings. It's getting very easy now!

====Finishing settings.php====
With all of our settings defined and added to our page that we created right at the beginning it is time to finish it all off.
<code php>
// Add our page to the structure of the admin tree
$ADMIN->add('themes', $temp);
</code>
The above line of code is the final line for the page. It is adding the page that we have created '''$temp''' to the admin tree structure. In this case it is adding it to the themes branch.

The following is the completed source for our settings.php ..... for your copy/paste pleasure.
<div style='height:300px;overflow:auto;'>
<code php>
<?php

/**
 * Settings for the demystified theme
 */

// Create our admin page
$temp = new admin_settingpage('theme_demystified', get_string('configtitle','theme_demystified'));

// Background colour setting
$name = 'theme_demystified/backgroundcolor';
$title = get_string('backgroundcolor','theme_demystified');
$description = get_string('backgroundcolordesc', 'theme_demystified');
$default = '#DDD';
$setting = new admin_setting_configtext($name, $title, $description, $default, PARAM_CLEAN, 12);
$temp->add($setting);

// Logo file setting
$name = 'theme_demystified/logo';
$title = get_string('logo','theme_demystified');
$description = get_string('logodesc', 'theme_demystified');
$setting = new admin_setting_configtext($name, $title, $description, '', PARAM_URL);
$temp->add($setting);

// Block region width
$name = 'theme_demystified/regionwidth';
$title = get_string('regionwidth','theme_demystified');
$description = get_string('regionwidthdesc', 'theme_demystified');
$default = 200;
$choices = array(150, 170, 200, 240, 290, 350, 420);
$setting = new admin_setting_configselect($name, $title, $description, $default, $choices);
$temp->add($setting);

// Foot note setting
$name = 'theme_demystified/footnote';
$title = get_string('footnote','theme_demystified');
$description = get_string('footnotedesc', 'theme_demystified');
$setting = new admin_setting_confightmleditor($name, $title, $description, '');
$temp->add($setting);

// Custom CSS file
$name = 'theme_demystified/customcss';
$title = get_string('customcss','theme_demystified');
$description = get_string('customcssdesc', 'theme_demystified');
$setting = new admin_setting_configtextarea($name, $title, $description, '');
$temp->add($setting);

// Add our page to the structure of the admin tree
$ADMIN->add('themes', $temp);
</code>
</div>

===Creating a language file and adding our strings===
As I'm sure none of you have forgotten, throughout the creation of the our settings.php page, we used a lot of strings that I mentioned we would set later on. Well now is the time to set those strings.

First up create the following directories and file for our language strings:
* Directory '''theme/demystified/lang'''
* Directory '''theme/demystified/lang/en'''
* File '''theme/demystified/lang/theme_demystified.php'''

What we have created here is the required structure for Moodle to start looking for language strings.

First Moodle locates the lang directory, once found it looks within that directory for another directory that uses the character code for the language the user has selected, by default this is '''en''' for English. Once that is found it looks for the appropriate language file, in this case '''theme_demystified.php''' from which it will load all language strings for our theme.

If English isn't your chosen language simply replace the ''en'' directory with one that uses your chosen languages character code (two letters).

We can now add our language strings to '''theme/demystified/lang/theme_demystified.php'''. Copy and paste the following lines of PHP into this file.
<code php>
<?php

/**
 * This file contains the strings used by the demystified theme
 */

$string['backgroundcolor'] = 'Background colour';
$string['backgroundcolordesc'] = 'This sets the background colour for the theme.';
$string['configtitle'] = 'Demystified theme';
$string['customcss'] = 'Custom CSS';
$string['customcssdesc'] = 'Any CSS you enter here will be added to every page allowing your to easily customise this theme.';
$string['footnote'] = 'Footnote';
$string['footnotedesc'] = 'The content from this textarea will be displayed in the footer of every page.';
$string['logo'] = 'Logo';
$string['logodesc'] = 'Enter the URL to an image to use as the logo for this site. Should be http://www.yoursite.com/path/to/logo.png';
$string['regionwidth'] = 'Column width';
$string['regionwidthdesc'] = 'This sets the width of the two block regions that form the left and right columns.';
</code>

In the above lines of code I have added an entry for each language string we used within ''settings.php''. When adding language strings like this make sure you use single quotes and try to keep things alphabetical - it helps greatly when managing strings.

Now when we view the settings page there will not be any errors or strings missing.

===Having a look at what we have created===
Now that we have created our settings page (settings.php) and added all of the language strings it is time to have a look at things in your browser.

Open your browser and enter the URL to your site. When you arrive at your site login as an administrator.

If you are not redirected to view the new settings change your URL to <nowiki>http://www.yoursite.com/admin/</nowiki> and your will see a screen to set the new theme settings we have just created. This lets us know that everything has worked correctly.

At any point now you are able to log in as administrator and within the settings block browse to '''Site administration > Appearance > Themes > Demystified theme''' to change those settings.

The screenshot below shows you what you should see at this point:

[[Image:Theme.settings.page.03.png|715px|thumb|left|The settings page we just created]]
<br style="clear:both;" />

==Using the settings in CSS==
With the settings page now created and operational it is time to make use of our new settings. The settings that we want to use within our CSS is as follows:

; backgroundcolor : Will be used to set the background colour in CSS.
; regionwidth : Will be the width of the column for CSS.
; customcss : Will be some custom CSS to add to our stylesheet.

At this point those names are the names we used for our setting with the slash and everything before it having been removed.

Before we start tearing into some code it is important that we have a look at what we are going to do and how we are going to go about it.

===How it all works within Moodle===
The first thing to understand is that while Moodle allows you to create a settings page and automates it inclusion and management right into the administration interfaces there is no smart equivalent for using the settings. This is simply because there is no way to predict how people will want to use the settings.

However don't think of this as a disadvantage, in fact it is quite the contrary. Although we can't just ''use'' our settings we can take full control over how and where we use them. It means it will take a little more code but in the end that will work to our advantage as we can do anything we want.

Moodle does help us out a little but not in an obvious way. The first thing that Moodle does is look for a config variable '''csspostprocess''' that should be the name of a function which we want called to make any changes to the CSS after it has been prepared.

The second thing Moodle does is include a lib.php from the theme's directory if one exists (also for the themes the current theme extends.) which ensures that as long as we write our code within '''theme/demystified/lib.php''' it will be included and ready to be used.

The third and final thing Moodle does that will help us out here is ensure that by the time any of code is ready to execute the settings have been prepared and are ready to be used within a theme config object which is passed into our ''csspostprocess'' function.

===Our plan===
As you have already probably guessed we will need to create a function to make the changes to the CSS that we want. We will then set the theme config option '''$THEME->csspostprocess''' to the name of our function.

By doing this when Moodle builds the CSS file it will call our function afterwards with the CSS and the theme object that contains our setting.

Now we know that we will use the ''csspostprocess'' function but how are we going to change the CSS, we could get the function to add CSS, or we could get the function to replace something within the CSS. My personal preference is to replace something within the CSS, just like what is happening with images. If you want to use an image within CSS you would write <nowiki>[[pix:theme|imagename]]</nowiki>.

For settings I am going to use <nowiki>[[setting:settingname]]</nowiki>, this way it looks a bit like something you are already familiar with.

What we need to decide upon next is the best way in which to replace our settings tag with the settings that the user has set.

There are two immediate options available to us:
# Make the ''csspostprocess'' function do all the work.
# Make the ''csspostprocess'' function call a separate function for each setting.
Solution 1 might sound like the simplest however it is going to result in a '''VERY''' complex function. Remember the user might have left settings blank or entered something that wouldn't be valid so we would need to make the sure there is some validation and a good default.
Because of this I think that solution 2 is the better solution.

So we are going to need a ''csspostprocess'' function and then a function for each of the three settings we have that will do the replacements.
<code php>
// This is our css post process function
function demystified_process_css($css, $theme) {};
// This replaces [[setting:backgroundcolor]] with the background colour
function demystified_set_backgroundcolor($css, $backgroundcolor) {};
// This replaces [[setting:regionwidth]] with the correct region width
function demystified_set_regionwidth() {$css, $regionwidth};
// This replaces [[setting:customcss]] with the custom css
function demystified_set_customcss() {$css, $customcss};
</code>

What you should note about the above functions is that they all start with the theme's name. This is required to ensure that the functions are named uniquely as it is VERY unlikely that someone has already created these functions.

So with our plan set out lets start writing the code.

===Writing the code===
The very first thing that we need to do is create a lib.php for our theme into which our css processing functions are going to go. So please at this point create '''theme/demystified/lib.php''' and open it in your editor ready to go.

The first bit of code we have to write is the function that will be called by Moodle to do the processing '''demystified_process_css'''. 

Before we start out please remember that the wonderful thing about coding is that there is any number of solutions to a problem. The solutions that you are seeing here in this tutorial are solutions that I have come up with to meet fulfil the needs of the tutorial without being so complex that they are hard to understand. This probably isn't how I would go about it normally but this is a little easier to understand for those who aren't overly familiar with PHP and object orientation.

====The function: demystified_process_css====

<code php>
function demystified_process_css($css, $theme) {

    if (!empty($theme->settings->backgroundcolor)) {
        $backgroundcolor = $theme->settings->backgroundcolor;
    } else {
        $backgroundcolor = null;
    }
    $css = demystified_set_backgroundcolor($css, $backgroundcolor);

    if (!empty($theme->settings->regionwidth)) {
        $regionwidth = $theme->settings->regionwidth;
    } else {
        $regionwidth = null;
    }
    $css = demystified_set_regionwidth($css, $regionwidth);

    if (!empty($theme->settings->customcss)) {
        $customcss = $theme->settings->customcss;
    } else {
        $customcss = null;
    }
    $css = demystified_set_customcss($css, $customcss);

    return $css;
}
</code>

So lets look at the things that make up this function:

<code php>
function demystified_process_css($css, $theme) {
    //.....
    return $css
}
</code>

This of course is the function declaration. 

The function gets given two variables, the first '''$css''' is a pile of CSS as one big string, and the second is the theme object '''$theme''' that contains all of the configuration, options, and settings for our theme.

It then returns the ''$css'' variable, essentially returning the modified CSS.

<code php>
    //...
    if (!empty($theme->settings->backgroundcolor)) {
        $backgroundcolor = $theme->settings->backgroundcolor;
    } else {
        $backgroundcolor = null;
    }
    $css = demystified_set_backgroundcolor($css, $backgroundcolor);
    //...
</code>

Here we are processing our first setting ''backgroundcolor''. 

The first thing that we need to do is check whether it has been set and whether it has a value. If it has then we store that value in '''$backgroundcolor'''. It is doesn't have a value then we set ''$backgroundcolor'' to null. This ensures that ''$backgroundcolor'' is set because if it isn't then you are going to get a notice (if you have debugging on).

The final line of this block calls the function '''demystified_set_backgroundcolor'''. We haven't written this function yet but we will shortly. When we call it we give it the ''$css'' variable that contains all of the CSS and we give it the background colour variable ''$backgroundcolor''. Once this function is finished it returns the ''$css'' variable with all of the changes made much like how our css processing function works.

What you should also note about this code is this:
<code php>
$theme->settings->backgroundcolor
</code>
As mentioned earlier ''$theme'' is an object that contains all of the configuration and settings for our theme. The ''$theme'' object has a $settings property which contains all of the settings for our theme, and finally the settings property contains a variable backgroundcolor that is the value the user entered for that setting. That is how we get a settings value.

<code php>
if (!empty($theme->settings->regionwidth)) {
    $regionwidth = $theme->settings->regionwidth;
} else {
    $regionwidth = null;
}
$css = demystified_set_regionwidth($css, $regionwidth);

if (!empty($theme->settings->customcss)) {
    $customcss = $theme->settings->customcss;
} else {
    $customcss = null;
}
$css = demystified_set_customcss($css, $customcss);
</code>

These two routines are nearly identical to the routine above. For both the regionwidth and the customcss we make sure it has a value and then store it in a variable. We then call the relevant function to make the changes for that setting.

Now that we have the general processing function it is time to write the three functions we have used but not written, ''demystified_set_backgroundcolor'', ''demystified_set_regionwidth'', ''demystified_set_customcss''.

====The function: demystified_set_backgroundcolor====

First up demystified_set_backgroundcolor.

<code php>
/**
 * Sets the background colour variable in CSS
 *
 * @param string $css
 * @param mixed $backgroundcolor
 * @return string
 */
function demystified_set_backgroundcolor($css, $backgroundcolor) {
    $tag = '[[setting:backgroundcolor]]';
    $replacement = $backgroundcolor;
    if (is_null($replacement)) {
        $replacement = '#DDDDDD';
    }
    $css = str_replace($tag, $replacement, $css);
    return $css;
}
</code>

Ok so what is happening here?

First we need a variable '''$tag''' that contains the tag we are going to replace. As mentioned earlier we are going to use tags that look like the image tags you are already familiar with ''<nowiki>[[setting:settingname]]</nowiki>'', in this case ''<nowiki>[[setting:backgroundcolor]]</nowiki>''.

Next I am going to create a variable called '''$replacement''' into which I put '''$backgroundcolor'''.

The '''IF''' statement that comes next checks ''$replacement'' to make sure it is not null. If it is then we need to set it to a default value. In this case I have used ''#DDD'' as that was the default for the settings.

The line after the IF statement puts it all together. The ''str_replace'' function that we are calling takes three arguments in this order:
# The text to search for.
# The text to replace it with.
# The text to do the replacement in.
It then returns the text with all of the replacements made. So in this case we are replacing the tag with the background colour and it is returning the changed CSS.

The final thing is to return the ''$css'' variable which now contains the correct background colour.

====The function: demystified_set_regionwidth====

Next we have the demystified_set_regionwidth function.
<code php>
/**
 * Sets the region width variable in CSS
 *
 * @param string $css
 * @param mixed $regionwidth
 * @return string
 */
function demystified_set_regionwidth($css, $regionwidth) {
    $tag = '[[setting:regionwidth]]';
    $doubletag = '[[setting:regionwidthdouble]]';
    $replacement = $regionwidth;
    if (is_null($replacement)) {
        $replacement = 200;
    }
    $css = str_replace($tag, $replacement.'px', $css);
    $css = str_replace($doubletag, ($replacement*2).'px', $css);
    return $css;
}
</code>

This function is very similar to the above function however there is one key thing we are doing different. We are doing two replacements.

# The first replacement is for the width that the user selected. In this case I am replacing the tag ''<nowiki>[[setting:regionwidth]]</nowiki>'' with the width.
# The second replacement is for the width x 2. This is because the page layout requires that the width be doubled for some of the CSS. Here I will replace ''<nowiki>[[setting:regionwidthdouble]]</nowiki>'' with the doubled width.

Remember because it is still just a number we need to add '''px''' to the end of each before we do the replacement.

So the overall process of this function is:
# Define the two tags as '''$tag''' and '''$doubletag'''.
# Make '''$replacement''' the region width ''$regionwidth''.
# Set ''$replacement'' to a default value of 200 is it is null.
# Replace '''<nowiki>[[setting:regionwidth]]</nowiki>''' with the width.
# Replace '''<nowiki>[[setting:regionwidthdouble]]</nowiki>''' with the width x 2.
# Return the changed CSS.

====The function: demystified_set_customcss====

The final function that we need to write is the demystified_set_customcss function.
<code php>
/**
 * Sets the custom css variable in CSS
 *
 * @param string $css
 * @param mixed $customcss
 * @return string
 */
function demystified_set_customcss($css, $customcss) {
    $tag = '[[setting:customcss]]';
    $replacement = $customcss;
    if (is_null($replacement)) {
        $replacement = '';
    }
    $css = str_replace($tag, $replacement, $css);
    return $css;
}
</code>

This function is just like the first function. I'm going to let you work it out on your own.

And that is it no more PHP... Hallelujah I can hear you yelling. The final thing we need to do is tell our theme about the functions we have written and put the settings tags into the CSS.

===Finishing it all off===

So there are two things we have to do in order to complete this section and have our the settings page implemented and our settings being used.

First we need to tell our theme that we want to use the function ''demystified_process_css'' as the ''csspostprocess'' function. This is done very simply by adding the following line of PHP to the bottom of our theme's config.php file '''theme/demystified/config.php'''.

<code php>
$THEME->csspostprocess = 'demystified_process_css';
</code>

With that done the only thing left is to add the settings tag into the CSS. Remember those settings tags are:

; <nowiki>[[setting:backgroundcolor]]</nowiki> : We need to add this where ever we want the background colour setting to be used.
; <nowiki>[[setting:regionwidth]]</nowiki> : We need to add this where ever we want to set the width of the block regions.
; <nowiki>[[setting:regionwidthdouble]]</nowiki> : We need to add this where ever we want to set the doubled width of the block regions.
; <nowiki>[[setting:customcss]]</nowiki> : We need to add this to the bottom of the CSS file that we want the custom CSS added to.

So lets make those changes in CSS now, open up your ''core.css'' file and replace the CSS with the CSS below:
<code css>
/** Background color is a setting **/
html {background-color:[[setting:backgroundcolor]];}
body {margin:30px;padding:0;border:1px solid #333;border-width:0 10px 0 10px;background-color:#333;}
body #page {background-color:#FFF;position:relative;top:-10px;}
.block .header {background-image:none;background-color:#0C5CAC;border:1px solid #0C5CAC;color:#FFF;}
.block {border-color:#4BA7FF;background-color:#DDEEFF;}
.block .content {background-color:#F1F8FF;}
a:link,
a:visited {color:#0C5CAC;}
a:hover {color:#C77500;}
#page #page-header {background-color:#0C5CAC;margin:0;padding:0;width:100%;color:#fff;}
#page #page-header a:link, #page #page-header a:visited {color:#FFAC02}
#page #page-header .navbar, #page #page-header .navbar a:link, #page #page-header .navbar a:visited {color:#0C5CAC;}
/** Override the region width **/
#page-content #region-main-box {left:[[setting:regionwidth]];}
#page-content #region-main-box #region-post-box {margin-left:-[[setting:regionwidthdouble]];}
#page-content #region-main-box #region-post-box #region-pre {width:[[setting:regionwidth]];left:[[setting:regionwidth]];}
#page-content #region-main-box #region-post-box #region-post {width:[[setting:regionwidth]];}
#page-content #region-main-box #region-post-box #region-main-wrap #region-main {margin-left:[[setting:regionwidthdouble]];}
.side-pre-only #page-content #region-main-box #region-post-box {margin-left:-[[setting:regionwidth]];}
.side-pre-only #page-content #region-main-box #region-post-box #region-main-wrap #region-main {margin-left:[[setting:regionwidth]];}
.side-post-only #page-content #region-main-box #region-post-box {margin-left:-[[setting:regionwidth]];}
.side-post-only #page-content #region-main-box #region-post-box #region-main-wrap #region-main {margin-left:[[setting:regionwidth]];}
/** Custom CSS **/
[[setting:customcss]]
</code>

You will notice that <nowiki>[[setting:backgroundcolor]]</nowiki> has been used for the html tags background colour:
<code css>
html {background-color:[[setting:backgroundcolor]];}
</code>

We have also set the width of the block regions by adding <nowiki>[[setting:regionwidth]]</nowiki> as the width for region-pre and region-post as shown below:
<code css>
#page-content #region-main-box {left:[[setting:regionwidth]];}
#page-content #region-main-box #region-post-box {margin-left:-[[setting:regionwidthdouble]];}
#page-content #region-main-box #region-post-box #region-pre {width:[[setting:regionwidth]];left:[[setting:regionwidth]];}
#page-content #region-main-box #region-post-box #region-post {width:[[setting:regionwidth]];}
#page-content #region-main-box #region-post-box #region-main-wrap #region-main {margin-left:[[setting:regionwidthdouble]];}
.side-pre-only #page-content #region-main-box #region-post-box {margin-left:-[[setting:regionwidth]];}
.side-pre-only #page-content #region-main-box #region-post-box #region-main-wrap #region-main {margin-left:[[setting:regionwidth]];}
.side-post-only #page-content #region-main-box #region-post-box {margin-left:-[[setting:regionwidth]];}
.side-post-only #page-content #region-main-box #region-post-box #region-main-wrap #region-main {margin-left:[[setting:regionwidth]];}
</code>
You'll notice here that we have to set several different widths and margins using the regionwidth setting and make use of the special regionwidthdouble setting that we added.

The final thing that we did was add the <nowiki>[[setting:customcss]]</nowiki> to the bottom of the file to ensure that the custom CSS comes last (and therefore can override all other CSS).

And with that we are finished. The screenshot below shows how this now looks in the browser if I set the background colour setting to '''<span style='color:#FFA800;'>#FFA800</span>''' and made the column width 240px;

[[Image:Theme.settings.page.04.png|715px|thumb|left|Our settings in action]]<br style="clear:both;" />

==Using the settings within our layout files==
Now that we have utilised the first three settings within our theme's CSS file it is time to implement the other two settings within the layout files so that they are written directly into the page.

You'll be glad to know this is no where near as difficult as utilising settings within a CSS file although it still does require a little bit of PHP.

First up is the logo setting. Into this setting the user is able to enter the URL to an image to use as the logo for the site. In my case I want this to be just a background logo on top of which I want to position the page header.

Before I start there is one thing I need to do however and that is create a default logo background that gets shown if the user hasn't set a specific logo file. To do this I simply created an image '''logo.jpg''' and put it into a pix directory within the demystified theme. You should end up with '''theme/demystified/pix/logo.jpg'''.

Next open up the front-page layout file ''theme/demystified/layout/frontpage.php''. At the top of the file is the PHP that checks what blocks regions the page has and a bit of other stuff. Well right below the existing bit of PHP we want to add the following code:
<code php>
if (!empty($PAGE->theme->settings->logo)) {
    $logourl = $PAGE->theme->settings->logo;
} else {
    $logourl = $OUTPUT->pix_url('logo', 'theme');
}
</code>
What we are doing here is creating a variable called $logourl that will contain the URL to a logo file that was either entered by the user or if they left it blank is that of our default logo file.

There are two things that you should notice about this. First the logo setting can be retrieved through '''$PAGE->theme->settings->logo''' and second we get the default logo url by calling '''$OUTPUT->pix_url('logo', 'theme')'''.

Now that we have the logo URL we are going to use we need to add an image to the header section of the page as shown below:
<code php>
<div id="page-header" class="clearfix">
        <img class="sitelogo" src="<?php echo $logourl;?>" alt="Custom logo here" />
        <h1 class="headermain"><?php echo $PAGE->heading ?></h1>
....
</code>

If you save that and browse to your sites front page you will notice that the logo file is now being shown. Hooray. However it is probably not styled too nicely so lets quickly fix that. Open up the core.css file and add the following lines of CSS to the bottom of the file.
<code css>
#page-header {position:relative;min-height:100px;}
#page-header .sitelogo {float:left;}
#page-header .headermain {position:absolute;left:0.5em;top:50px;margin:0;float:none;font-size:40px;}
</code>
These three lines position the image correctly and if you now refresh everything should appear perfectly. 

With the logo done the last setting we need to deal with is the footnote setting. The idea with this setting was that the administrator could enter some text into the editor and it would be displayed in the footer of the page.

This is probably the easiest setting to implement.

Within the front page layout file that we edited above add the following lines below those we added previously.

<code php>
if (!empty($PAGE->theme->settings->footnote)) {
    $footnote = $PAGE->theme->settings->footnote;
} else {
    $footnote = '<!-- There was no custom footnote set -->';
}
</code>

Here we are just collecting the footnote into a variable '''$footnote''' and setting a default footnote comment if the user hasn't entered one.

We can now echo the $footnote variable within the page footer. This can be done as shown below.

<code php>
<!-- START OF FOOTER -->
    <div id="page-footer">
        <div class="footnote"><?php echo $footnote; ?></div>
        <p class="helplink">
        <?php echo page_doc_link(get_string('moodledocslink')) ?>
        </p>
</code>

And with that done we are finished! Congratulations if you got this far.

The screenshot below shows the demystified theme we have just created that is styled by the settings page.

[[Image:Theme.settings.page.05.png|715px|thumb|left|My finished demystified theme]]<br style="clear:both" />

==Testing our creation==
Congratulations to you! If you've made it this far you have done very well. Now it is time to have a look at what we have created and give it a quick test run.

So in this tutorial we have achieved the following:

* We created a theme called demystified that is based on the standard theme.
* We added a settings page to our new theme.
* We added the following settings to our settings page:
** We can set a background colour through the admin interface.
** We can change the logo of the site.
** We can change the block region width.
** We can add a footnote to the page footer
** We can add some custom CSS to seal the deal.
* Those settings were then used in the CSS files for our theme.
* They were also used in the layout files for our theme.
* And here we are testing it all.

The screenshots below show my testing process and I change each setting and view the outcome. The great thing about this is that with theme designer mode on you see the changes as soon as the form refreshes.

[[Image:Theme.settings.page.06.png|300px|thumb|left|Default settings]]
[[Image:Theme.settings.page.07.png|300px|thumb|left|Changed the background colour setting]]
[[Image:Theme.settings.page.08.png|300px|thumb|left|Changed the logo and region width]]
[[Image:Theme.settings.page.09.png|300px|thumb|left|Added a footnote]]
[[Image:Theme.settings.page.10.png|300px|thumb|left|Added some custom CSS]]
<br style="clear:both" />

==The different settings you can use==
During this tutorial we use four different kinds of settings, a text box, text area, a select (dropdown) and the editor however as I'm sure you have all guessed there is many more some of which will certainly be useful for theme settings.

The following are examples of some of the different settings. I should add that these build upon what we have already done within the tutorial but are not included in the download.

===Colour picker===
[[Image:Theme.settings.page.11.png|400px|thumb|The colour picker]]
I can hear you all asking now 'Why didn't you mention this one earlier?' well the answer is simple it didn't exist when I first wrote the tutorial. It is an admin setting that I wrote several days after because of the fantastic effort people were putting into trying out settings pages.

A bit about the colour picker. First up it is a text box that when the page loads turns into a colour picker that can be used to select a colour and can even preview the selected colour in the page (by clicking the preview button). It is designed to be very easy to use and the code is just about as simple as creating a normal text box setting.

In the image to the left I have replaced the background colour setting we created during the tutorial with the colour picker. Lets have a look at the code involved for that.
<code php>
// Background colour setting
$name = 'theme_demystified/backgroundcolor';
$title = get_string('backgroundcolor','theme_demystified');
$description = get_string('backgroundcolordesc', 'theme_demystified');
$default = '#DDD';
$previewconfig = array('selector'=>'html', 'style'=>'backgroundColor');
$setting = new admin_setting_configcolourpicker($name, $title, $description, $default, $previewconfig);
$temp->add($setting);
</code>
So first thing you should notice is that the first four lines of code have not changed at all!

The first change we have is to create a variable '''$previewconfig'''. 
This variable is used to tell the colour picker what to do when the user clicks the preview button. It should be an array that contains two things, first a selector, and second a style. 
# The selector is a CSS selector like ''.page .header h2''.
# The style is a what should change, there are two immediate values it can be, either '''backgroundColor''' or '''color'''.
In my case the selector is '''html''' to target the html tag and the style is backgroundColor to change the background colour.

The second change is to use '''admin_setting_configcolourpicker''' instead of ''admin_setting_configtext''. The arguments are nearly identical as well except that there is an extra argument to which we give the '''$previewconfig''' variable.

And that is it! it is all you need to get the colour picker up and running.

'''Extra note:''' The $previewconfig variable is optional. If you don't want a preview button the simply set ''$previewconfig = null''

==Common pitfalls and useful notes==

This section is really just a collection of pointers, tips, notes, and other short useful stuff that may be of use to those attempting this tutorial.

# First up and most importantly there are very few limitations to what you achieve in this fashion.
# If you get stuck or need a hand ask in the forums, there's always someone round who can help.
# If you do something really cool let us know, I know everyone in the community loves finding our what others are achieving.
# You don't have to use ''admin_settingpage'' you can also use '''admin_externalpage''' if you prefer. It should be noted however that it is not the preferred way to do it as admin_externalpage's were only left in Moodle 2.0 for backwards compatibility (although they are more flexible one day they will be deprecated or removed). Thank you to Darryl for raising this.
# If you find that your language strings aren't being used (you are getting language string notices) and you have double checked that you have turned '''langstringcache''' off then you may need to delete the language cache directory. This is located in the moodledata directory for you installation: moodledata/cache/lang/*. You should delete the directory for your chosen language by default ''en''.

==More information==
* [[Development:Themes 2.0]]
* [[Development:Themes 2.0 creating your first theme]]
* [[Development:Themes 2.0 overriding a renderer]]
* [[Development:Themes_2.0 adding upgrade code]]
* [[Development:Styling and customising the dock]]
* http://moodle.org/mod/forum/discuss.php?d=152053