Note: You are currently viewing documentation for Moodle 3.8. Up-to-date documentation for the latest stable version of Moodle may be available here: Quiz.

Development:Quiz: Difference between revisions

From MoodleDocs
(Added sections on penalties, pagination, timelimit, versioning.)
(Section on the 2005 rewrite)
Line 3: Line 3:
On this page I am planning to give an overview of how the module works. --[[User:Gustav|Gustav]] 07:12, 28 January 2006 (WST)
On this page I am planning to give an overview of how the module works. --[[User:Gustav|Gustav]] 07:12, 28 January 2006 (WST)


==The 2005 rewrite for adaptive questions==
During the first half of 2005 the quiz module code has undergone a considerable rewrite to allow for adaptive questions in which a question session can consist of several sequential student responses. The question can adapt itself to the student answers. For example in response to certain answers the question could provide feedback or hints and then ask the student to answer again or give the student a simpler or related question.
Unfortunately many changes had to be made to the question type methods. This has however resulted in improved efficiency and has made the writing of question types easier. It also allows question types with more powerful features and has fixed some bugs / annoying behaviour.
For details see:
*[[Quiz rewrite|Quiz module rewrite]]
*[[How to convert existing question types|Quiz conversion]]


==Pages with more details==
==Pages with more details==

Revision as of 11:32, 28 January 2006

The quiz module is a complex module with its own modular structure to allow question type plug-ins. The module has grown organically and in spite of a lot of rewriting for Moodle 1.5 the code is not very simple to understand.

On this page I am planning to give an overview of how the module works. --Gustav Delius 07:12, 28 January 2006 (WST)

The 2005 rewrite for adaptive questions

During the first half of 2005 the quiz module code has undergone a considerable rewrite to allow for adaptive questions in which a question session can consist of several sequential student responses. The question can adapt itself to the student answers. For example in response to certain answers the question could provide feedback or hints and then ask the student to answer again or give the student a simpler or related question.

Unfortunately many changes had to be made to the question type methods. This has however resulted in improved efficiency and has made the writing of question types easier. It also allows question types with more powerful features and has fixed some bugs / annoying behaviour.

For details see:

Pages with more details

Terminology

In order to describe and understand the quiz module, it is necessary to understand the terminology that is used to describe its aspects. Below some important terms are listed and explained and in some cases linked to more detailed documentation.

adaptive question (QTI speak: adaptive item)

Adaptive questions are questions that walk the user through a directed graph of question states depending on the user's responses. E.g. a complicated mathematical question that is answered incorrectly, but is likely to be incorrect because of a common mistake, could provide the user with a hint towards this mistake, apply a penalty and allow a second attempt at this question. Quizzes can be run in adaptive mode, which provides buttons to mark each question individually.

answer(s)

The term answer is used exclusively for the teacher defined answers of a question. These answers are usually stored in the quiz_answers table and are compared to the responses for grading.

attempt(s)

The term attempt is used in the sense of "Attempt at the quiz". Depending on the quiz settings, a student may be allowed several attempts at a quiz. An attempt is finished when the student clicks on the corresponding button on the attempt page. Students do not have to complete an attempt in one visit. They can navigate away from the quiz page and return later to continue the same attempt.

Within one and the same quiz attempt a student may make several attempts at answering a particular question, at least if the questiontype allows it and the quiz is set up in adaptive mode. These will always be referred to as "attempts at a question", never just as "attempts".

event

The $stateobject (and the quiz_states table) has a field event, which indicates the event that led to the creation of the state. The field can take the value of any of the following constants (defined in locallib.php):

  • EVENTOPEN: The attempt has just been opened and this is the initial state of a question, i.e. the user has seen the question did not interact with it yet.
  • EVENTSAVE: The responses are just being saved, either because the student requested this explicitly or because the student navigated to another quiz page.
  • EVENTVALIDATE: The student requested a validation of the responses. (This is not supported by all questiontypes.)
  • EVENTGRADE: The responses are being graded but the question session is not closed. This is generally the case for adaptive questions.
  • EVENTCLOSE: The responses are being graded and the question session is closed. Usually this happens because the whole attempt closes, either because the student requests it or because the time is up or because we are beyond the due date.
  • EVENTDUPLICATEGRADE: This is a strange one. It indicates that the responses would have been graded had they not been found to be identical to previous responses.

When new responses are being processed by the function quiz_process_responses, then this function is being passed the event type in $action->event while the responses are in $action->responses.

question(s)

Strictly, a question in the context of the quiz module is the set of definitions (question name, question text, possible answers, feedback, etc.) that constitute a reusable item. Therefore a question itself is a static entity. All data related to interactions with a particular question (in a particular attempt on a particular quiz) is stored in its corresponding states.

questiontype

There are several questiontypes built into the quiz module, however, due to the plugin architecture of the quiz module, it is possible to define custom questiontypes. Existing questiontypes include true/false, multiple choice, short answer, numerical and calculated questions.

responses

Conceptually these are the students' responses to a question. This is always used in plural, although for some questiontypes there is only one possible response. In the runtime $state object there is a field $state->responses, which holds an array of a student's responses to a question. See also: Quiz response storage

state

Question states are saved in the table quiz_states. States always "belong" to a question within a particular attempt and are therefore also user specific. The first state in a question's life cycle during an attempt records the fact that the user has seen the question. This state is never modified, however, it can be superseded by a new state, which represents a user interaction. Different user interactions are defined by the events, a set of constants, one for each possible type of user interaction.

session

A question session is the complete history of question states that the question is taken through. Usually only the most recent state and the last graded state are of interest though.

Penalty mechanism

What it is for

When the quiz is run in adaptive mode the student can interact with a question repeatedly. So in particular the student can try again when he gets a wrong answer. Clearly the final mark for the question must reflect the fact that the student did not get it right originally. Therefore a penalty is subtracted from the final mark.

How the penalty is determined

First of all penalties are relevant only if a quiz is run in adaptive mode. Only in this case can a student have a second attempt and therefore only in this mode can there be any occasion to subtract a penalty.

Even in adaptive mode the penalty mechanism is only used when it is selected in the quiz options. If "Apply penalties" is set to "No" then the final mark for the question is the mark for the last graded response.

Each question has a 'penalty' field (which should really be called 'penaltyfactor') which is a number between 0 and 1. The penalty for a wrong response is calculated as the product ($quiz->penalty * $quiz->grade), i.e., as the product of the penaltyfactor with the maximum achievable grade for the question. This product is stored in $state->penalty. So $quiz->penalty is the fraction of the maximum grade that is subtracted as a penalty for each wrong response.

The $quiz->penalty field has a default value of 0.1, both in the database and in mod/quiz/defaults.php. This default can of course be overwritten by the admin on the quiz configuration page. This admin-selected default is (as usual for admin defaults) stored in $CFG->quiz_penalty. The teacher can choose a different penalty factor for each individual question when adding or editing a question.

Now if a student makes repeated wrong attempts (or partially correct attempts) the penalties for all these attempts are added up in $state->sumpenalties. The mark for the question is then calculated as the mark for the last graded response minus the sum of the penalties.

One curious fact about $state->sumpenalties is that, for efficiency reasons, it is not stored in the quiz_states table but instead in the 'sumpenalty' field of the quiz_newest_states table. That way it only has to be stored once per attempt rather than once per response.

Where it is done in the code

The function quiz_apply_penalty_and_timelimit() subtracts the penalty in $state->sumpenalty from the raw grade in $state->raw_grade to obtain $state->grade for the response. However it is ensured that the grade of a new attempt at the question never falls below the previously achieved grade. This function also increases $state->sumpenalty by the amount in $state->penalty. The assumption is that $state->penalty has just been set appropriately by the code calling this function, e.g., quiz_process_responses.

Time limit

A quiz can have a time limit. This is stored in minutes in $quiz->timelimit. So before using this in time calculations it always has to be multiplied by 60 to turn it into seconds like all other timestamps in moodle and php. If $quiz->timelimit is zero it means there is no timelimit.

If a student asks to start an attempt on view.php for a quiz with a timelimit then he is shown a javascript message alerting him to the timelimit and is asked to confirm.

For quizzes with timelimit attempt.php shows a javascript timer that counts down and automatically submits and closes the attempt when the time is up.

Confusingly there are two javascript timers in the quiz module. jsclock.php provides a countdown in the title bar that counts down to the quiz closing time if this is less than a day away. This has nothing to do with the timelimit. jstimer.php provides the countdown timer that implements the timelimit. It in turn uses timer.js.

The time a response was submitted by the student is recorded by attempt.php right at the top of the page and is then passed on to quiz_process_responses in $action->timestamp. This puts it into $state->timestamp. Finally, after the responses have been graded, the function quiz_apply_penalty_and_timelimit() checks that the responses are within the timelimit to within 5% and if not it sets the grade to zero (or the previously obtained grade, if that is higher).

Pagination

Quiz attempts can be paginated, i.e., spread over several pages. The student can navigate between the pages using the standard Moodle paging bar. When the student navigates to a different quiz page the answers on the current page are automatically submitted for saving (but not grading).

To do this automatic submission the paging bar needs some javascript. It is therefore not produced with Moodle's standard print_paging_bar() function from weblib.php but with quiz_print_navigation_panel() which is defined in mod/quiz/locallib.php and produces something that looks the same.

The teacher has complete control via the edit interface on edit.php over where the page breaks should occur. He can repaginate the quiz with any chosen number of questions per page. He can also move the page-breaks up and down using the arrows.

Internally page breaks are stored in the $quiz->questions field (which now should really be called $quiz->layout). This field contains a comma separated list of questionids and pagebreaks where the pagebreaks are represented by the id 0. For example 23,12,0,11, 0 means that the two questions with ids 23 and 12 are on the first page and the question with id 11 is on the second page. The last page break is invisible and Moodle sometimes puts it there itself for its own convenience.

Because the quiz has an option $quiz->shufflequestions to shuffle questions the layout that the student sees in a particular attempt does not necessarily have to be the same as that stored in $quiz->questions. Therefore each attempt has its own $attemp->layout field. If $quiz->shufflequestions is false then this just contains a copy of $quiz->questions but if it is true then during the creation of a new attempt by quiz_create_attempt() the function quiz_repaginate() is used to produce a layout with $quiz->questionsperpage number of questions per page that are randomly ordered.

Both attempt.php and review.php use the $attempt->layout field to determine what questions to show on a particular page. That way we can guarantee that the student will, for a particular attempt, always see the questions in the same order and with the same pagination, both while attempting and during review. Also a teacher when reviewing a student's attempt sees the pages the same way they were shown to the student. However the teacher is also given the option to see all questions on one page.

There are some functions in locallib.php dedicated to handling the layout fields: quiz_questions_on_page(), quiz_questions_in_quiz(), quiz_number_of_pages(), quiz_first_questionnumber(), quiz_repaginate(). They are very short functions. The function quiz_first_questionnumber() that determines the number of the first question on a particular page makes use of the $question->length field. To allow this calculation to be fast is the main reason why that field is in the question table even though it could also be determined easily from the question type.


Question versioning

Note: Question versioning is currently disabled until it is re-developed to fix all reported issues.

When questions that were already attempted by a student are edited, it can be important to keep a copy of the question as it was before editing in order to reconstruct the quiz as it was seen by the student. To provide this functionality a question versioning mechanism was implemented.

The first goal, namely keeping around old questions, is easily achieved. They are just not deleted any more. However, this is not enough; it is also necessary to store which questions are versions of others. To achieve this goal, there is an additional table, which stores the versioning information: quiz_question_versions.

When a question is replaced for which there are already student attempts then all the attempt data gets associated to the new version of the question and is re-graded. This requires the question ids in the quiz_attempts, quiz_states and quiz_newest_states tables to be replaced by the new id. However we do also want to be able to reconstruct the quiz the way the student saw it when he gave his answers. For that purpose the id of the original question is always preserved in the 'originalquestion' field of the quiz_states table.

If all old versions of questions are kept around this could horribly clutter the editing interface. Therefore a field called hidden was added to the quiz_questions table and all old versions of edited questions are automatically hidden. When this flag is set to 1 the question is not displayed in the list of available questions, unless the user chooses to show them.

While the mechanism above should work as described, there is some additional complexity in order to minimise the number of versions created. If a question is created and has not been attempted by a student yet (this excludes teacher previews of the individual question and the quiz!), the database record will be reused (i.e. overwritten) and no new version will be created. This is especially important when the question is created and the first 2 or 3 mistakes are only noticed during preview.

On the editing screen for questions an additional set of options was introduced (see image). Replacement Options It shows which quizzes use the edited question and how many students have attempted it in a particular quiz. Based on this information it is then possible to choose in which quizzes the new version of the question should be used and in which ones the old one should remain.

By default the 'replace' checkbox for all quizzes that don't have any students' attempts are checked and in addition, if the question is edited out of a quiz context (i.e. not in the category question list), the 'replace' option is checked for that quiz as well.

Database

The changes to the database structure are limited to an added field (hidden) in the quiz_questions table and an additional table called quiz_question_versions. However, dealing with the quiz_questions table has become slightly more complicated.

The hidden field in the quiz_questions table has no implications for the core functionality. It is only used to determine, as the name implies, whether the question is shown in the category list or not.

The table quiz_question_versions stores information about the actual change. This information includes the ids of the old question and the new question, the id of the user who did the change and a timestamp. Quite importantly, the id of the quiz, in which the question was replaced is also stored. This means that the versions table provides a history of the different states the quiz went through until it was edited to be at the current state. The information allows to recreate a quiz as it was at any point in time (from a data perspective - this possibility is not used extensively by the code).

Adjustments to the Data

When a question is replaced by a newer version, database records are updated in the order shown below (compare with question.php):

  • First a new record is inserted into the quiz_question_versions table for each affected quiz (i.e. each quiz in which the question was replaced).
  • Then, for each affected quiz, the comma separated list of question ids in the question field is updated by replacing the old question id with the new one.
  • In the quiz_question_instances table the record that links the old question to the quiz is also updated to point to the new question.
  • In all attempts belonging to the old question the comma-separated list of question ids in the layout field are changed by replacing the old id by the new one.
  • All states belonging to the old question are made to belong to the new version by changing the id in the 'question' field. However if we are replacing the original question then the id of this original version is stored in the originalquestion field.
  • We have to change the questionid field in quiz_newest_states.
  • Finally we have to do any question-type specific changes. For example question types that store student responses by storing the id of the answer in the quiz_answers table will have to recode these ids in all the states to point to the corresponding answers in the new version. This is handled by the function replace_question_in_attempts() in the question type class.

Affected Code and Functionality

Note: This section should still be considered under construction until the question mark behind bug #3311 is taken off.

In the file review.php and potentially also in the file attempt.php, if a question is edited during a student's attempt, the data from quiz_question_versions needs to be taken into account. If a student has attempted a quiz and a question was changed afterwards (i.e. a new version of that question was created), the question id of the old version remains in the comma separated list inside the attempt->layout field. However, since the records in the quiz_question_instances table get updated, we need to go forward in the question history, by looping through entries from the quiz_question_versions table, to find out the id of the question version that is currently used in the quiz.

Suggestion: With a fairly simple change to the convention of what is stored in the quiz_question_versions table we could get rid of the requirement of looping through all the versions. If in the newquestion field we store the id of the question that is currently used in the quiz, it would be possible to get the complete history for a question quite simply by selecting by quiz id and newquestion.

It should be fairly simple to write an upgrade script for this change. Additionally, another set_field would need to be added to question.php to change the newquestion field to the new question id. The benefits would be a much simpler handling of the question history, resulting in more efficient code than the current fix for bug #3311 in review.php.

The place where all the versioning actually takes place is question.php. Here the changes described in Adjustments to the Data are carried out.

Obviously the backup and restore scripts also take quiz_question_versions into account, however, they don't need to be concerned with the ways the data is used.