Note: You are currently viewing documentation for Moodle 3.4. Up-to-date documentation for the latest stable version of Moodle is likely available here: Using TeX Notation 3.

Using TeX Notation 3

From MoodleDocs

Brackets

As students advance through Maths, they come into contact with brackets. Algebraic notation depends heavily on brackets. The usual keyboard values of ( and ) are useful, for example:

  

This is written as:

 $$ d = 2 \ \times \ (4 \ - \ j) $$

Usually, these brackets are enough for most formulae but they will not be in some circumstances. Consider this:

  

Is OK, but try it this way:

  

This can be achieved by:

 $$ 4x^3 \ + \ \left(x \ + \ \frac{42}{1 + x^4}\right) $$

A simple change using the \left( and \right) symbols instead. Note the actual bracket is both named and presented.

Ellipsis

The Ellipsis is a simple code:

  

Written like:

 $$ x_1, \ x_2, \ \ldots, \ x_n  $$

A more practical application could be:

Question:

 "Add together all the numbers from 1  38.
 What is an elegant and simple solution to this problem?
 Can you create an algebraic function to explain this solution?
 Will your solution work for all numbers?"

Answer: The question uses an even number to demonstrate a mathematical process and generate an algebraic formula.

Part 1: Part 2. Part 3.


An algebraic function might read something like:

Where t = total and n = the last number.

The solution is that, using the largest and the smallest numbers, the numbers are added and then multiplied by the number of different combinations to produce the same result adding the first and last numbers.

The answer must depend on the number, being a whole number. Therefore, the solution will not work for an odd range of numbers, only an even range.

Geometric Shapes

There are two ways to produce geometric shapes, one is with circles and the other is with lines. Each take a bit of practice to get right, but they can provide some simple geometry. It may be easier to produce the shapes in Illustrator or Paint Shop Pro or any one of a number of other drawing packages and use them to illustrate your lessons, but sometimes, some simple diagrams in Moodle will do a better job.

Circles

Circles are easy to make.

cfmimetex20.gif
Circles are easily created, and only needs a number to determine how large the circle is.

To create the circle use $$ \circle(150) $$. This makes a circle of 150 pixels in diameter.

Creating Arcs

Arcs are also easy to produce, but require some additional parameters. The same code structure used in circles create the basic shape, but the inclusion of a start and end point creates only the arc. However, notice where the 0 point is, not at the true North, but rather the East and run in an anti-clockwise direction.

cfmimetex21a.gif
$$ \circle(120;90,180)$$
cfmimetex21b.gif
$$ \circle(120;0,90)$$
cfmimetex21c.gif
$$ \circle(120;180,270)$$
cfmimetex21d.gif
$$ \circle(120;270,360)$$

The \picture Command

Using circles and arcs as shown above is somewhat limiting. The \picture command allows you to use a frame in which to build a picture of many layers. Each part of the picture though needs to be in its own space, and while this frame allows you to be creative, to a degree, there are some very hard and fast rules about using it.

All elements of a picture need to be located within the picture frame. Unexpected results occur when parts of an arc, for example, runs over the border of the frame. (This is particularly true of lines, which we will get to next, and the consequences of that overstepping of the border can cause serious problems.)

The \picture command is structured like:

  \picture(100){(50,50){\circle(200)}}
  \command(size of frame){(x co-ordinate, y co-ordinate){\shape to draw(size or x co-ordinate,[y co-ordinate)})  
  Count the opening and closing brackets, be careful of the position,       

cfmimetex24a.gif
$$ \picture(100){(50,50){\circle(200)}}&&

The picture frame brings elements together that you may not otherwise see.

Because of the frame size of 100px and the centre point of the circle in the mid-point of the frame, the 200px circle will be squashed. Unexpected results occur when sizes are not correct.

cfmimetex24b.gif

Using the picture frame, you can place circles and lines inside each other, or can intersect.

$$ \picture(100){(50,50){\circle(99)} (50,50){\circle(80,80)}} $$

cfmimetex24c.gif
You may want to see an image of a circle with a dot in the middle.

You may have to try to place the centre dot correctly , but the ordering of the elements in the image may have an impact.

$$ \picture(100){(48,46){\bullet}(50,50){\circle(99)}} $$

cfmimetex24d.gif
Using the same ideas as above, you can make semi-circles.

$$\picture(150){(50,50){\circle(100;0,180)}(100,50){\circle(100;180,360)}}$$

Lines


Warning: Drawing lines in TeX Notation in Moodle is an issue. If the line is not drawn properly then the parser will try to correctly draw the line but will not successfully complete it. This means that every image that needs be drawn will be drawn until it hits the error. When the error is being converted, it fails, so no subsequent image is drawn. Be careful and make sure your line works BEFORE you move to the next problem or next image.


a couple of lines
$$\red \picture(200){(20,0){ \line(180,0)}{(20,180){\line(180,0}$$

The structure of the picture box is that the \picture(200) provides a square image template.

The (20,0) provides the starting coordinates for any line that comes after. In this case the start point is at 20pixels in the x axis and 0 pixels in the y axis. The starting point for all coordinates, 0,0, is the bottom left corner and they run in a clockwise manner. Do not confuse this with arcs.

The \line(180,0) determines the length and inclination of the line. In this case, the inclination is 0 and the length is 180px.

These are enclosed in braces, all inside one set of braces owned by the \picture() control sequence.

The next set of commands are the same, that is, the (20,200) are the coordinates of the next line. The x co-ordinate is the 20, that is the distance to the right from the 0 point. The y co-ordinates is the distance from the bottom of the image. Whereas the first line started and ran on the bottom of the picture frame, the y co-ordinate starts at the 200 pixel mark from the bottom of the image. The line, at 180 pixels long and has no y slope. This creates a spread pair of parallel lines.

\pictures explained

While this explains the structure of a line, there is a couple of elements that you need to go through to do more with them.

You can set up an intersecting pair easily enough, using the \picture control sequence.

cfmimetex31.gif
$$ \picture(200){(10,0){\line(150,150)} (0,130){\line(180,-180)}} $$

The lines that are drawn can be labeled.

$$ \picture(200){(10,0){\line(150,150)}(0,130){\line(180,-180)} (0,10){A}(0,135){B}(140,0){C}(140,150){D}} $$

To produce another image.

cfmimetex32.gif
To which you may want to ask the question:

$$The \ \angle \ of \ AXB \ is \ 72\textdegree. \ What \ is \ the \ value \ of \ \angle BXD? $$

cfmimetex32a.gif

NOTE: Labeling this image, above-right, turned out to be fairly simple. Offsetting points by a few pixels at the start or end points of the lines proved a successful strategy. The X point proved a little more problematic, and took a number of adjustments before getting it right. Experience here will help.

A Triangle

This triangle has been developed for a Trigonometry page - but the additional notation should provide insight into how you can use it.

The triangle shows like:
trig01.gif
We use the different elements of the triangle to identify those things we need to know about a right-angled triangle.

The hypotenuse is always the side that is opposite the right angle. The longest side is always the Hypotenuse.

To identify the other elements of the triangle we look for the sign . is the starting point for naming the other sides.

The side that is opposite is known as the Opposite.

The side that lies alongside is known as the Adjacent side.

To determine which is which, draw a line that bisects and whatever line it crosses is the Opposite side.

The code:

$$ \picture(350,250){(25,25){\line(300,0)}(25,25){\line(0,220)}(25,245){\line(300,-220)}(310,25){\circle(100;135,180)}(20,100){\line(310,-75)} (25,25){\fbox{\line(5,5)}}(25,25){\line(150,150)}(165,140){Hypotenuse}(120,2){Adjacent}(2,80){\rotatebox{90}{Opposite}}(270,40){\theta}}$$

See Also