Note: You are currently viewing documentation for Moodle 3.2. Up-to-date documentation for the latest stable version of Moodle is probably available here: Upgrading.

Upgrading: Difference between revisions

From MoodleDocs
(Version in tar unarchive filename changed to identical wget filename)
 
(6 intermediate revisions by one other user not shown)
Line 53: Line 53:
====Linux====
====Linux====
  mv moodle moodle.backup
  mv moodle moodle.backup
  tar xvzf moodle-{{Version}}.tgz
  tar xvzf moodle-{{Version2}}.tgz


Next, copy across your config.php, any custom plugins, and your .htaccess file if you created one ('''check that custom plugins are the correct version for your new Moodle first'''):
Next, copy across your config.php, any custom plugins, and your .htaccess file if you created one ('''check that custom plugins are the correct version for your new Moodle first'''):
Line 142: Line 142:
===Outgoing mail setup===
===Outgoing mail setup===


All email settings relating to outgoing mail can now be found in 'Outgoing mail configuration' in Site administration. There is no longer a setting "Always send from no-reply address"; instead there is a setting "Allowed email domains". If you want to send emails from users' real addresses you need to add domains allowed by your mail server to this list. Sending email from email addresses not matching the sender domain will be detected by clients and such emails could be classified as "Spam". '''Moodle will no longer use support email as Return-Path.'''
All email settings relating to outgoing mail can now be found in 'Outgoing mail configuration' in Site administration. There is no longer a setting "Always send from no-reply address"; instead there is a setting 'Allowed email domains' (allowedemaildomains). If you want to send emails from users' real addresses you need to add domains allowed by your mail server to this list. Sending email from email addresses not matching the sender domain will be detected by clients and such emails could be classified as spam. '''Moodle will no longer use support email as Return-Path.'''


===Recommendations on changing settings===
===Recommendations on changing settings===
Line 151: Line 151:
* In ''Site administration > Grades > General settings'' 'Navigation method' (grade_navmethod) should be set to Tabs to improve the navigation experience, especially when using the Boost theme which doesn't use an Administration block.
* In ''Site administration > Grades > General settings'' 'Navigation method' (grade_navmethod) should be set to Tabs to improve the navigation experience, especially when using the Boost theme which doesn't use an Administration block.
* In ''Site administration > Appearance > Navigation'' 'Link admin categories' (linkadmincategories) should be set to Yes to improve the navigation experience, especially when using the Boost theme which doesn't use an Administration block.
* In ''Site administration > Appearance > Navigation'' 'Link admin categories' (linkadmincategories) should be set to Yes to improve the navigation experience, especially when using the Boost theme which doesn't use an Administration block.
* In ''Site administration > Security > HTTP security'' two new settings 'cURL blocked hosts list' (curlsecurityblockedhosts) and 'cURL allowed ports list' (curlsecurityallowedport) are for improving the security of cURL requests (used in blogs, URL repository, etc.). It is recommended to blacklist localhost and its aliases and allow only 80 port.
* In ''Site administration > Security > HTTP security'' two new settings 'cURL blocked hosts list' (curlsecurityblockedhosts) and 'cURL allowed ports list' (curlsecurityallowedport) are for improving the security of cURL requests (used in blogs, URL repository, etc.). It is recommended to blacklist localhost and its aliases and allow ports 443 (for HTTPS) or 80 (for HTTP).
* In ''Site administration > Courses > Course default settings'' The default course format (moodlecourse/format) has been changed from Weeks to Topics and the default value for 'Number of sections' (moodlecourse/numsections) has been changed from 10 to 4.
* In ''Site administration > Courses > Course default settings'' The default course format (moodlecourse/format) has been changed from Weeks to Topics and the default value for 'Number of sections' (moodlecourse/numsections) has been changed from 10 to 4.


===Asynchronous activity deletion with the Recycle bin===
===Asynchronous activity deletion with the recycle bin===


Recycle bin that was added in Moodle 3.1 and automatically enabled has been found to cause slowness during activity deletion. Since Moodle 3.2 enabling recycle bin automatically means that activity deletion will happen asynchronously in the background. You must ensure that cron runs regularly, preferably every minute. Running cron every minute will '''not''' slow down the site because each task will still run only when scheduled.
The [[Recycle bin]] (added in Moodle 3.1 and enabled by default) has been found to cause sites to run slowly during activity deletion. To solve this issue in Moodle 3.2 onwards, if the recycle bin is enabled, then activity deletion will happen asynchronously in the background. This requires that the [[Cron|cron]] is run frequently, preferably every minute. Running the cron every minute will '''not''' slow down a site, since each task will only run when scheduled.


===Media players===
===Media players===
Line 163: Line 163:
* [[VideoJS player]] is the new default video and audio player. If you had filters with media players installed they may no longer be needed in Moodle 3.2.
* [[VideoJS player]] is the new default video and audio player. If you had filters with media players installed they may no longer be needed in Moodle 3.2.
* Media players [https://github.com/moodlehq/moodle-media_flowplayerflash Flowplayer], [https://github.com/moodlehq/moodle-media_wmp Windows media player], [https://github.com/moodlehq/moodle-media_realplayer RealPlayer] and [https://github.com/moodlehq/moodle-media_quicktime Quicktime] have been removed in Moodle 3.2. If they are needed they should be installed in media/player directory. Note that VideoJS includes a built-in Flash player, thus Flowplayer is no longer needed.  Windows media player, RealPlayer and Quicktime were removed because these formats are now rarely used and browsers no longer support them.
* Media players [https://github.com/moodlehq/moodle-media_flowplayerflash Flowplayer], [https://github.com/moodlehq/moodle-media_wmp Windows media player], [https://github.com/moodlehq/moodle-media_realplayer RealPlayer] and [https://github.com/moodlehq/moodle-media_quicktime Quicktime] have been removed in Moodle 3.2. If they are needed they should be installed in media/player directory. Note that VideoJS includes a built-in Flash player, thus Flowplayer is no longer needed.  Windows media player, RealPlayer and Quicktime were removed because these formats are now rarely used and browsers no longer support them.
See the [[dev:Moodle {{Version}} release notes|Moodle {{Version}} release notes]] for the full list of changes in Moodle {{Version}}.


===Customised MathJax URL===
===Customised MathJax URL===
Line 174: Line 171:


Moodle now supports looking up IPv6 addresses using the [http://dev.maxmind.com/geoip/geoip2/geolite2/ GeoLite2]  database from [http://www.maxmind.com Maxmind]. This replaces the existing GeoLite legacy database used in previous versions and the new GeoIP2 database will need to be installed to use this functionality.
Moodle now supports looking up IPv6 addresses using the [http://dev.maxmind.com/geoip/geoip2/geolite2/ GeoLite2]  database from [http://www.maxmind.com Maxmind]. This replaces the existing GeoLite legacy database used in previous versions and the new GeoIP2 database will need to be installed to use this functionality.
===Competencies and Grades links move===
The Competencies and Grades links have been moved from the Administration block to the Navigation block (or nav drawer if using Boost) so that the Administration block does not need to be shown to students.
=== MySQL full unicode support===
In fresh installs of Moodle 3.2.2, MySQL and MariaDB drivers support full UTF-8. For sites upgrading to 3.2.2, a CLI script may be used to convert to full UTF-8. See [[MySQL full unicode support]] for details.
See the [[dev:Moodle {{Version}} release notes|Moodle {{Version}} release notes]] for the full list of changes in Moodle {{Version}}.


=== Moodle 2.9, 3.0 and 3.1 improvements ===
=== Moodle 2.9, 3.0 and 3.1 improvements ===

Latest revision as of 10:37, 15 July 2019

This page explains in detail how to upgrade Moodle. For a summary of the process, see Upgrade overview.

Check the requirements

Check that your server meets all requirements for 3.2 in Administration > Site administration > Server > Environment.

Moodle 3.2 has raised the minimum required PHP version to 5.6.5.

Note: You can only upgrade to Moodle 3.2 from Moodle 2.7 or later. If upgrading from earlier versions, you must upgrade to 2.7 as a first step.

Before upgrading

We advise that you test the upgrade first on a COPY of your production site, to make sure it works as you expect.

Consider setting the upgrade key for your site.

Backup important data

There are three areas that should be backed up before any upgrade:

  1. Moodle software (For example, everything in server/htdocs/moodle)
  2. Moodle uploaded files (For example, server/moodledata)
  3. Moodle database (For example, your Postgres or MySQL database dump)

See Site backup for more specific information.

Check for plugin updates

If you have Automatic updates deployment enabled, you will be able to update installed plugins automatically during the upgrade. Just make sure you check for available updates (via the button for it) at the Plugins check screen.

If you are updating plugins manually, it is a good moment now to check in the Moodle Plugins directory whether there is a 3.2 version available for any plugins (including themes) that you have previously installed on your site. If so, download the plugin package. In the next step, you will copy it to the appropriate location in your Moodle code (see Installing plugins).

The upgrade of the plugin will then happen as part of the Moodle upgrade process.

If an out-of-date plugin causes your upgrade to fail, you can usually delete the plugin code rather than uninstalling it from within Moodle so that the data associated with it is not deleted.

Put your site into maintenance mode

Before you begin upgrading your site, you should put it into maintenance mode to stop any non-admin users from logging in. Then you should wait for any currently running cron processes to complete before proceeding.

Install the new Moodle software

You can fetch the current version of the software through

wget http://sourceforge.net/projects/moodle/files/Moodle/stable32/moodle-latest-32.tgz

Standard install package

  1. Move your old Moodle software program files to another location. Do NOT copy new files over the old files.
  2. Unzip or unpack the upgrade file so that all the new Moodle software program files are in the location the old files used to be in on the server. Moodle will adjust SQL and moodledata if it needs to in the upgrade.
  3. Copy your old config.php file back to the new Moodle directory.
  4. As mentioned above, if you had installed any plugins on your site you should add them to the new code tree (Moodle directory structure) now. It is important to check that you get the correct version for your new version of Moodle. Be particularly careful that you do not overwrite any code in the new version of Moodle and that you place the plugin folders in the correct directory (the same directory that they are in in the current installation.)
  5. Your moodledata folder should be located separately to your Moodle code folder and, as such, should not need anything done to it. Moodle 3.0 will throw a warning if it is located in a web accessible folder and the moodledata should never be located in the Moodle code folder. If you are moving your installation to a new server or new location on your server, then you will need to follow the Migration documents.

Linux

mv moodle moodle.backup
tar xvzf moodle-32.tgz

Next, copy across your config.php, any custom plugins, and your .htaccess file if you created one (check that custom plugins are the correct version for your new Moodle first):

cp moodle.backup/config.php moodle
cp -pr moodle.backup/theme/mytheme moodle/theme/mytheme
cp -pr moodle.backup/mod/mymod moodle/mod/mymod

Don't forget to make moodle/config.php (and the rest of the source code) readable by your www server. Ideally the files should not be writeable by your server.

chown -R www-data:www-data moodle (Linux debian - change to appropriate user and group for your OS version) chmod -R 755 moodle

If you use cron, take care that cron.php is executeable and uses the correct php command:

chmod 740 admin/cli/cron.php (some configurations need chmod 750 or chmod 755)
copy the first line from cron.php (if it looks like '#!/usr/local/bin/php' or '#!/usr/local/bin/php5.3', no need to copy '<?php') 

if necessary. However, for a simple upgrade, there should be no need to change anything with cron.

Using Git

You can use Git for updating or upgrading your Moodle. See Git for Administrators for details.

Command line upgrade

On Linux servers, Moodle 3.2 supports running the upgrade from the command line, rather than through a web browser. This is likely to be more reliable, particularly for large sites.

Finishing the upgrade

The last step is to trigger the upgrade processes within Moodle.

If you put your site into Maintenance mode earlier; take it out now!

To do this just go to Administration > Site administration > Notifications.

Moodle will automatically detect the new version and perform all the SQL database or file system upgrades that are necessary. If there is anything it can't do itself (very rare) then you will see messages telling you what you need to do.

Assuming all goes well (no error messages) then you can start using your new version of Moodle and enjoy the new features!

Note: If you are running multiple servers then you should purge all caches manually (via Administration > Site administration > Development > Purge all caches) after completing the upgrade on all servers.

Fatal error: Maximum execution time of 30 seconds exceeded...

If your server uses a main language other than English, you may encounter a 'Fatal error: Maximum execution time of 30 seconds exceeded' when you try to upgrade it. You can increase max_execution_time = 160 on php.ini to allow the scripts enough time to process the language update. Otherwise, you can switch to English as the default language before doing the upgrade and back to your original language after a succcessful upgrade. See the forum discussion at https://moodle.org/mod/forum/discuss.php?d=119598.

After upgrading

The config.php file from your installation should work fine but if you take a look at config-dist.php that came with Moodle 3.0 there are more/different options available (e.g. database drivers and settings). It's a good idea to map your old config.php settings to a new one based on the 3.0 config-dist.php.

Cron

Cron has received a major update (MDL-25499) and now has support for both scheduled and ad hoc tasks.

The benefits of these changes are:

  • The schedule for every task can be configured by the admin
  • Tasks can run in parallel
  • Cron processes use locking to prevent the same task running at the same time by different processes
  • Clusters with multiple identical application nodes are supported, you can run cron on all of them

A result of this is that cron can be run much more often, which means (for example) forum posts can be sent out sooner. To take advantage of the new cron system it is now strongly recommended that administrators increase the frequency that cron is run to at least once per minute.

You also may need to modify any automated scripts you have that are parsing the output from cron. It is no longer possible to simply monitor the output of cron for the string "Cron script completed correctly" (if that is what you were doing). An alternative is to monitor the output for the string "task failed:". If you detect that a task is failing, here are some tips for debugging the failure.

Before the upgrade, there may have been a cron task that was failing, which was preventing the rest of cron from being executed. A failure in any single task will no longer prevent the rest of the Moodle cron tasks from executing, so you may uncover previously masked bugs. It is a good idea to closely monitor the output from cron after the upgrade.

Assignments

The old assignment (2.2) module has been removed from core and has been replaced by a stub to support transparently remapping URLs and restoring course backups from the old module to the new one.

If you are still using the old assignment (2.2) module, after upgrading to Moodle 3.0 all assignment (2.2) activities will be hidden. You need to run the Assignment upgrade tool to un-hide the activities.

If you really, really need to keep using the old assignment (2.2) module, you should update the code to Moodle 3.0, and then replace the "mod/assignment" folder with the one from https://github.com/moodlehq/moodle-mod_assignment/releases before completing the upgrade.

Possible issues that may affect you in Moodle 3.2

Custom roles requiring site administration access

Any custom roles which require access to any part of site administration that do not use the manager archetype will need to be allowed the new capability, moodle/site:configview.

Removed plugins

The following plugins have been removed from the standard Moodle 3.2 package:

  • RADIUS authentication plugin (using the mcrypt PHP functions which are deprecated as of PHP 7.1)
  • Alfresco repository plugin (does not work with Alfresco 5.0.c or later)

Themes Base and Canvas have been deprecated and also removed from the standard Moodle 3.2 package. These themes can not be used by themselves but they may be used as parent themes.

Outgoing mail setup

All email settings relating to outgoing mail can now be found in 'Outgoing mail configuration' in Site administration. There is no longer a setting "Always send from no-reply address"; instead there is a setting 'Allowed email domains' (allowedemaildomains). If you want to send emails from users' real addresses you need to add domains allowed by your mail server to this list. Sending email from email addresses not matching the sender domain will be detected by clients and such emails could be classified as spam. Moodle will no longer use support email as Return-Path.

Recommendations on changing settings

Some administrative settings and roles have changed their defaults in Moodle 3.2. These changes will not be automatically applied to the upgraded sites. The following changes are recommended to improve security, user experience and navigation:

  • In Site administration > Appearance > Navigation 'Show my course categories' (navshowmycoursecategories) should be set to No if you use a theme with flat navigation such as Boost.
  • In Site administration > Grades > General settings 'Navigation method' (grade_navmethod) should be set to Tabs to improve the navigation experience, especially when using the Boost theme which doesn't use an Administration block.
  • In Site administration > Appearance > Navigation 'Link admin categories' (linkadmincategories) should be set to Yes to improve the navigation experience, especially when using the Boost theme which doesn't use an Administration block.
  • In Site administration > Security > HTTP security two new settings 'cURL blocked hosts list' (curlsecurityblockedhosts) and 'cURL allowed ports list' (curlsecurityallowedport) are for improving the security of cURL requests (used in blogs, URL repository, etc.). It is recommended to blacklist localhost and its aliases and allow ports 443 (for HTTPS) or 80 (for HTTP).
  • In Site administration > Courses > Course default settings The default course format (moodlecourse/format) has been changed from Weeks to Topics and the default value for 'Number of sections' (moodlecourse/numsections) has been changed from 10 to 4.

Asynchronous activity deletion with the recycle bin

The Recycle bin (added in Moodle 3.1 and enabled by default) has been found to cause sites to run slowly during activity deletion. To solve this issue in Moodle 3.2 onwards, if the recycle bin is enabled, then activity deletion will happen asynchronously in the background. This requires that the cron is run frequently, preferably every minute. Running the cron every minute will not slow down a site, since each task will only run when scheduled.

Media players

  • Moodle 3.2 includes a new 'Media players' plugin type. Overriding a media players by a theme will no longer work; instead you need to create a media player plugin.
  • VideoJS player is the new default video and audio player. If you had filters with media players installed they may no longer be needed in Moodle 3.2.
  • Media players Flowplayer, Windows media player, RealPlayer and Quicktime have been removed in Moodle 3.2. If they are needed they should be installed in media/player directory. Note that VideoJS includes a built-in Flash player, thus Flowplayer is no longer needed. Windows media player, RealPlayer and Quicktime were removed because these formats are now rarely used and browsers no longer support them.

Customised MathJax URL

If you customised the mathjax CDN url note that filter_mathjaxloader/httpurl has been removed and only filter_mathjaxloader/httpsurl is used.

IP address lookups

Moodle now supports looking up IPv6 addresses using the GeoLite2 database from Maxmind. This replaces the existing GeoLite legacy database used in previous versions and the new GeoIP2 database will need to be installed to use this functionality.

Competencies and Grades links move

The Competencies and Grades links have been moved from the Administration block to the Navigation block (or nav drawer if using Boost) so that the Administration block does not need to be shown to students.

MySQL full unicode support

In fresh installs of Moodle 3.2.2, MySQL and MariaDB drivers support full UTF-8. For sites upgrading to 3.2.2, a CLI script may be used to convert to full UTF-8. See MySQL full unicode support for details.


See the Moodle 3.2 release notes for the full list of changes in Moodle 3.2.

Moodle 2.9, 3.0 and 3.1 improvements

Depending on which version you are upgrading from, please see the section 'Possible issues that may affect you' in the documentation

See also