Note: You are currently viewing documentation for Moodle 2.9. Up-to-date documentation for the latest stable version of Moodle may be available here: Apache.

Apache: Difference between revisions

From MoodleDocs
 
(47 intermediate revisions by 19 users not shown)
Line 1: Line 1:
When most people refer to '''Apache''' they are talking about the "Apache HTTP Server Project". In fact Apache is really the "Apache Software Foundation" which hosts a long list of projects of which the HTTP server is just one, albeit the best known.
{{Installing Moodle}}
'''This article refers to the 'Apache HTTP server''''


The Apache HTTP Server enables web pages to be published on the internet (or an intranet or even on a single test machine). It is tightly linked with the [[PHP]] scripting language in which Moodle is developed. A web server is a required component of a Moodle installation. There are two distinct developments of the Apache HTTP Server, version 1 and version 2. Although version 2 should have replaced version 1, the architectures are so different that they both continue to be supported. Either are fully supported by Moodle.
The Apache HTTP server is the software that (along with the PHP scripting language) 'runs' Moodle. Note that there are alternatives (e.g. IIS on Windows) but the Apache HTTP Server is very popular on all platforms.  


The Apache HTTP Server Project describes itself thus:
== Installing Apache ==
Installers are available for most platforms from http://httpd.apache.org/download.cgi. The official installation instructions are here: http://httpd.apache.org/docs/2.0/install.html. If you are running Linux then you are recommended to use the packaged version if you can. For example in Debian/Ubuntu it is simply:
<pre>
sudo apt-get install apache2
</pre>


"The Apache HTTP Server Project is an effort to develop and maintain an open-source HTTP server for modern operating systems including UNIX and Windows NT. The goal of this project is to provide a secure, efficient and extensible server that provides HTTP services in sync with the current HTTP standards.
See the documentation for your particular platform for the instructions. Apache is straightforward to build from source if you have to and the PHP documentation contains an article on building both Apache and PHP together - although you should rarely need to do that.


Apache has been the most popular web server on the Internet since April 1996. The November 2005 Netcraft Web Server Survey found that more than 70% of the web sites on the Internet are using Apache, thus making it more widely used than all other web servers combined."
==Performance==


See [[Performance recommendations]]


==Slasharguments==
The function ''slash arguments'' is required for various features in Moodle to work correctly, as described in [[Using slash arguments]].
To turn it on, add this line to your ''httpd.conf'', or to a ''.htaccess'' file in your local directory:
AcceptPathInfo On
Note: When using ".htaccess" in your local Moodle install folder, you should include/enable "AllowOverride Directive" in "httpd.conf", first.
Also! please note that using .htaccess file will cause performance hit on your server!
==SSL==
Moodle has an option to enable HTTPS for the whole site or for just the login pages; either option requires that your web server is configured for SSL.
* Whole site HTTPS is enabled by changing http://<url> to https:// <url> in your config.php 'wwwroot' parameter.
* Login only HTTPS is enabled by setting the 'loginhttps' parameter, where the wwwroot schema should remain as http://
Login only https is available in the admin interface via Administration>Security>HTTP Security and checking the button. (Note the warning and see ssl section below)
Prior to Moodle 2.3 It was not advised to run the whole site over HTTPS due to legacy restrictions with client-side caching. This is no longer the case assuming client browsers support the 'Cache-Control: public' method, which all supported browsers for this version of Moodle do.
To use HTTPS you will need to obtain an SSL certificate, you have two options:
* Generate a self-signed certificate. This is fine on (say) an Intranet but unsuitable for the public internet, but users will we warned the certificated is untrusted when used publicly.
* Purchase a certificate from a vendor. There is a surprising range of prices and value-added services available. Some hosting companies even provide free certificates.
Debian provides instructions for installing a self-signed certificate [https://wiki.debian.org/Self-Signed_Certificate on their wiki] and includes general information on configuring Apache for SSL.
If you purchase a vendor certificate you will normally receive instructions for installing it.
A basic Apache SSL configuration can be summarised as:
Listen 443
NameVirtualHost *:443
<VirtualHost *:443>
    SSLEngine On
    SSLCertificateFile /path/to/your/certificate.crt
    SSLCertificateKeyFile /path/to/your/certificate.key
    ...
</VirtualHost>


== See also ==
== See also ==
Line 15: Line 61:
* [http://httpd.apache.org/ The Apache HTTP Server Project homepage]
* [http://httpd.apache.org/ The Apache HTTP Server Project homepage]
* [http://en.wikipedia.org/wiki/Apache_HTTP_Server Wikipedia article on the Apache HTTP Server]
* [http://en.wikipedia.org/wiki/Apache_HTTP_Server Wikipedia article on the Apache HTTP Server]
* [http://httpd.apache.org/docs/2.0/misc/perf-tuning.html Apache Performance Tuning article at the official homepage]
* [https://els.earlham.edu/cayaraa/weblog/1468.html Making Moodle work with SSL]
* [http://www.krufix.de/ Using the same Moodle twice in local network and Internet via SSL-Proxy] (in German)


 
[[pl:Apache]]
[[Category:Administrator]]
[[ja:Apache]]
[[Category:Developer]]
[[de:Apache]]
 
[[es:Apache]]
{{stub}}

Latest revision as of 12:37, 15 September 2015

This article refers to the 'Apache HTTP server'

The Apache HTTP server is the software that (along with the PHP scripting language) 'runs' Moodle. Note that there are alternatives (e.g. IIS on Windows) but the Apache HTTP Server is very popular on all platforms.

Installing Apache

Installers are available for most platforms from http://httpd.apache.org/download.cgi. The official installation instructions are here: http://httpd.apache.org/docs/2.0/install.html. If you are running Linux then you are recommended to use the packaged version if you can. For example in Debian/Ubuntu it is simply:

sudo apt-get install apache2

See the documentation for your particular platform for the instructions. Apache is straightforward to build from source if you have to and the PHP documentation contains an article on building both Apache and PHP together - although you should rarely need to do that.

Performance

See Performance recommendations

Slasharguments

The function slash arguments is required for various features in Moodle to work correctly, as described in Using slash arguments.

To turn it on, add this line to your httpd.conf, or to a .htaccess file in your local directory:

AcceptPathInfo On

Note: When using ".htaccess" in your local Moodle install folder, you should include/enable "AllowOverride Directive" in "httpd.conf", first. Also! please note that using .htaccess file will cause performance hit on your server!

SSL

Moodle has an option to enable HTTPS for the whole site or for just the login pages; either option requires that your web server is configured for SSL.

  • Whole site HTTPS is enabled by changing http://<url> to https:// <url> in your config.php 'wwwroot' parameter.
  • Login only HTTPS is enabled by setting the 'loginhttps' parameter, where the wwwroot schema should remain as http://

Login only https is available in the admin interface via Administration>Security>HTTP Security and checking the button. (Note the warning and see ssl section below)

Prior to Moodle 2.3 It was not advised to run the whole site over HTTPS due to legacy restrictions with client-side caching. This is no longer the case assuming client browsers support the 'Cache-Control: public' method, which all supported browsers for this version of Moodle do.

To use HTTPS you will need to obtain an SSL certificate, you have two options:

  • Generate a self-signed certificate. This is fine on (say) an Intranet but unsuitable for the public internet, but users will we warned the certificated is untrusted when used publicly.
  • Purchase a certificate from a vendor. There is a surprising range of prices and value-added services available. Some hosting companies even provide free certificates.

Debian provides instructions for installing a self-signed certificate on their wiki and includes general information on configuring Apache for SSL. If you purchase a vendor certificate you will normally receive instructions for installing it.

A basic Apache SSL configuration can be summarised as:

Listen 443
NameVirtualHost *:443
<VirtualHost *:443>
    SSLEngine On
    SSLCertificateFile /path/to/your/certificate.crt
    SSLCertificateKeyFile /path/to/your/certificate.key
    ...
</VirtualHost>

See also