Lesson module

The lesson module presents a series of HTML pages to the student, who is usually asked to make some sort of choice underneath the content area. The choice will send them to a specific page in the Lesson. In a Lesson page's simplest form, the student can select a continue button at the bottom of the page, which will send them to the next page in the Lesson.

There are 2 basic Lesson page types that the student will see: question pages and branch table pages. There are also several advanced navigational pages which can meet more specialized needs of the Teacher. The Lesson module was designed to be adaptive and to use a student's choices to create a self directed lesson.

• The significant difference between a Lesson and other activity tools available in Moodle comes from its adaptive ability. With this tool, each answer to a question may send the student to a different series of pages in the lesson. The teacher's response and the next page the student will see has already been thought out by the teacher. Thus Lesson can deliver content in interesting and flexible ways to each student, with no direct or time sensitive action required by the teacher once the lesson has been created.

General information about the lesson and its methodology

For a student, a lesson is a series of interactive pages that require a choice on their part before the next page appears.

The choice determines the way the lesson appears to the student. The lesson can be a series of pages presented in a linear fashion, like a slide show, or presented in a non-linear, branching manner, or a combination of the two. The teacher can use the Lesson settings to create a different student experience for each lesson. There are also special navigation pages that the teacher may use to change the way parts of the lesson are viewed by students.

The student choice generally drives the lesson, which has been thought out by the teacher. For example, a particular answer might send the student back in the lesson for a review, while another answer will advance the student to a new page. Sometimes the student will only be given the choice to "continue". The lesson can be scored with the use of questions for a grade, or used simply as a resource of non-graded pages or a combination of both.

There are two basic modes: presentation and flash card. Most of the descriptions of a lesson in this document are about the presentation mode and the use of questions and branch pages. The Flash Card section describes how to make lesson pages appear randomly.

Table of Contents

Presentation Lesson

The Lesson activity uses the standard Moodle HTML editor tool to make any page's content interesting. This tool can assist the teacher with pictures, links, fonts, tables and other graphics to engage the student's attention. Lesson also can keep students from straying from the lesson plan with various settings including password protection, various time limits and dependency on a previous lesson's activity.

Navigation pages are only seen by the teacher but will affect the order of the pages the student views. For example, a cluster is a series of pages bracketed by a navigational pages called a "start cluster" and a "end of cluster" page. Navigation pages are an advanced feature and are best added after the teacher has laid out their lesson with the pages that will be seen by the student.

Pages, questions, answers and responses

A lesson is made up of pages. For the teacher there are two basic types of Lesson pages: choice and navigation. The student sees choice pages called "Branch Tables" or Question pages. Branch tables deliver content and can provide links to one or more other pages in the lesson. Each question page can do the same but also can give an individual response and an individual score for each choice (the student's answer). The teacher decides upon the page type and how to best use its flexibility to achieve the educational goals of the specific Lesson or course.

For example, the default lesson question is a multiple choice page. The teacher might place content on the page and ask a question about it. The teacher can provide 1 to 20 answers. In a simple use of the multiple choice question, the teacher might decided to send the student back to the question again after a student selects a wrong answer, but move a correct answer to the next page. On some answers, the teacher may decide to provide some explanation before sending the student along. Unlike a piece of paper, the answers are going to re arrange themselves every time the student enters the question page.

Of course the teacher can decide a more complex approach in constructing Lesson or a page. Using our multiple choice example,the teacher may give each answer a different score. And/or depending upon the answer, send the student to a different page for an appropriate review. The teacher may decide that a specific Lesson is a series of pages filled with information and only one choice (the continue button) that always sends the student to the next page, perhaps saving the question pages for the end.

Table of Contents

Edit order and navigation order

The order of the pages of a lesson is usually determined by the material or the personal style of the teacher. A page feature called jumps determines what a student sees next. Once a lesson contains two or more pages the teacher can move existing pages around and add different kinds of pages to any position within the lesson.

The teacher sees the pages in what is called the edit order when they edit a lesson. The students see the lesson pages in the navigation order, which can also be seen by the teacher in preview mode. Most of the time we will be talking about the edit order from the teacher's perspective, rather than navigation order of the student.

Jumps are the primary tool the teacher will use to determine a students navigation. For example, each different answer to a question, might send the student to a different page. There are two types of jumps, relative and absolute. The default jumps used by most pages are the relative jumps "Next Page" and "This Page". For example, the destination of the Next Page jump is always the next page in the edit order of the lesson. An absolute jump sends the student to a specific page (identified by the page title). A pull down list of possible jumps assist the teacher in being creative. Thus jumps allow the teacher to design a lesson for the students with "branches", loops and a non-linear structure.

The teacher can see how a lesson's navigation "works" by using several preview tools. For example there is a Preview tab for the teacher when they open a lesson and there is also a preview icon associated with each page. It is possible for the Teacher to switch their role in the course to that of a student.

Table of Contents

Answers

Typically each question within a lesson will have one correct answer and several wrong answers. For example, in a multiple choice question, each answer can receive an individual response from the teacher before sending the student (with a jump setting) to view the same or another page.

As will be seen later, there are two ways to score an answer. In one method, the direction students are sent in the edit order of pages determines if the answer was correct or wrong for scoring purposes. Usually a correct answer advances the student in the edit order and wrong answers send the students back to the question page or back in the edit order. The other method uses custom scoring and an answer is given a score to calculate the grade.

When a question page is added, the jumps have a default setting. The jump for the first answer is the Next Page and it is a good practice to keep this as a right answer. The jumps for the subsequent answers are set to Same Page. The score for the first answer is 1 and for the rest 0. These settings can be changed by editing the question. Remember the order of the answers is going to be random each time a student enters the question page.

When Custom Scoring is turned On in the Lesson settings, then each answer has a point value associated with it. Usually a correct answer receives a score of 1 and a wrong answer receive a score 0. It is possible to give a negative score or partial credit (say 3 for the best answer and 1 for a marginal answer) in some question types.

Table of Contents

Grading

A students answers to questions can be graded. The lesson scores and grades can be viewed on the "Reports" tab in edit mode and become part of the gradebook. A relatively simple formula is used to score the lesson. It is the number of correct answers divided by the number of question pages seen. This number score can be use by the grade scale.

When Custom Scoring is selected in the Lesson settings, then the grading method changes. With this option, the grade is based on earned points by the user, which is divided by the total points possible. When this option is turned on, the teacher can assign a score for each answer, this can be a negative or 0 (zero) or a positive number. Usually the score is 0 for a wrong answer and 1 for a correct answer. The point values associated with each of the user's answers are added up. That is then divided by the total of the maximum points that the user could have earned for each page answered. This number is then scaled by the grade parameter of the lesson.

The overall score is computed when the Lesson is completed by the student. A completed lesson usually means the student has viewed every page, or answered every question or is directed by a jump to the "end of lesson".

TIP: Grading can be continued when student leaves the lesson for some reason before completing it. The student does not have to go through all of the lesson in one "sitting". For example, if a student goes through some pages and then breaks off, the next time they view the lesson they are asked whether they want to start at the beginning of the lesson or at the point where they left off. The latter point is actually the page they reached with their last correct answer. The previous "attempts" are recorded and the grade for "broken" sessions will include pages seen and questions answered in the previous viewings.

• The main focus of a lesson should be the transfer of knowledge in a reasonably interesting way. Giving a grade may well turn the lesson into a kind of quiz where giving the correct answer is the sole goal instead of exploring different ways of thinking about an idea. On the other hand, students like to get a perfect "score" and giving grades may well be the carrot needed to get the student to repeat the lesson until they get the magic 100%.

• Some instructors use Lessons as Formative Assignments where the grades, although some measure of activity, are not generally counted in the final mark for the course. If lessons are used in a formal way then it is probably best to use their grades in thresholds.
• Many instructors use lessons to get across chunks of knowledge. The grading options enable instructors to utilize the "Practice Principle" of eLearning, in which immediate practice in answering questions about content leads to improved retention and understanding of the material.

With that in mind, a lesson has a Retake option.

Teacher review of students answers

The teacher has several options to review students answers in a lesson. The report tab provides both an overview of each student's attempt of a lesson, and a detailed summary of the class's answers to each question. It is also possible to see the same report via gradebook in the course administration block.

Student Review

Enabling student review will override custom feedback for questions. Forum discussion

Table of Contents

Re-takes

Allowing a student to re take a lesson is the default lesson setting under grade options. Each attempt at a lesson is normally recorded and the student can see a record of their performance by viewing their activity page. The teacher when creating a lesson has the option of showing the "final" grade as either the mean of all the attempts or the best (maximum score) of their attempts. This "final" grade is the one shown on the Grades page and the "Lessons" page. By default the mean of the grades is used.

In some learning environments, the teacher may not wish the students to have more than one attempt at a lesson. A particular lesson may be being used in an exam-like situation. Here the Lesson parameter for re-take is set to "No. Once completed the lesson will then not allow students to re-take the lesson. If, however, the lesson is not completed in one "sitting", students are still allowed to restart the lesson at the beginning or the page after the last question they answered.

• As mentioned earlier a lesson can be used as a formative assignment, imparting some knowledge while at the same time making some demands on the students. It seems natural that students should be allowed to re-visit lessons and because they are given a grade many will want to achieve a good grade. This promotes re-takes.

• Remember that even if a student has achieved the maximum possible grade in a lesson, allowing them to revisit the lesson to explore the various "wrong" paths in the lesson, may provide the student, you and your class additional insights.

Table of Contents

Building lessons

When creating a lesson the teacher must put some content using the HTML editor tool into the first page. Once the first page is in place the teacher has the option of adding more pages in front or after that page. Once a question or branch page have been created, the pages can be edited by the teacher at any time. When the lesson contains more than one page the teacher also has the option of moving pages, that is, changing the order of the pages.

• A lesson will normally cover a limited amount of material. A topic or week might contain many lessons. Lessons are shown to the student in the home page for the course within "weeks" or "topics", and/or in the activity block when it is part of the course home page.

• As with any lesson, it is a good idea to have a plan before starting the presentation. Simple lessons that basically go from the start to the end in a straight line path, one page after the other, can be created from an outline. More complicated lessons require more planning. The good news is that a teacher can create a simple lesson and then based upon feedback and performance, can add refinements or complexity.

Adding_a_question_page- more help on adding question pages
Adding_a_branch_table - more help on adding branch pages

Table of Contents

Types of questions available within a lesson

Template:Moodle 1.6

Multiple choice

In a multiple choice question, the student is given a question and a list of answers. In a Lesson, the answer list will be shuffled every time the question is view by a student. In a multiple choice question, the student selects one answer.

Questions can use pictures. Indeed, pictures can be used as answers when the HTML editor is turned on and the page reloaded. Each answer in a multichoice question can be scored separately. It is possible to give a negative score for an answer, or partial credit for a wrong answer. The teacher can give a response based upon the answer selected by the student.

With multianswer box checked

A check in the multianswer box allows the teacher to determine that more than 1 answer is required for the student to receive credit for the question. There is no partial credit and the student must select just correct answers from a list.

An example of a multianswer question is:

Which of the following are animals?

- A dog

- A cow

- A rock

- A rose

To ensure the multianswer feature works, all correct answers should be in first lines of the answer list, receive the same score (let say 1), response and jump to the same page. Then wrong answers should hve the same score (usually 0), response and all jump to the same page. In other words you should have two groups of answers (correct answers first and then incorrect ones) with the identical scores, responses and jumps for each group.

A student who does not select all the correct answers, or includes any wrong answer will receive the "wrong answer" score, response and jump.

See also Multiple_Choice_question_type which is a quiz question and works differently.

Short answer

In a short answer question the student is expected to answer with one word or a few words. Short-Answer question type gives more information about this kind of question Template:Moodle 1.6 Starting with Moodle 1.6, there are two different student answer analysis systems available for the Short Answer type of question in the Lesson Module: the simple system and the new regular expressions system. The simple system is the default and is the same used by the Quiz Module. There is a "Use Regular Expressions" option box on the Edit Question Page screen in the Lesson Module.

We suggest first reading about the Short answer question page with the examples of the "simple analysis", and then read the Short answer analysis page that gives more information about "Regular Expression analysis".

Table of Contents

True / false

The True/False question type is a special case of the multiple choice question. The student is prompted to choose which is the correct option. See multiple choice question above for details.

Matching questions

Matching

Matching questions consist of a list of names or statements, or pictures which must be correctly matched against another list. For example "Match the letter with its position in the alphabet. One list would have A, B, C, D, Z and the other in a pull down menu next to each item would have 2, 4, 3, 1, 26 .

Unlike the Multichoice question where the choices are shown in a random order, the first list of items in a Matching question is not shuffled but shown in the same order as entered. The second list is scrambled.

In 1.9 there is one score, one response and one jump associated with the right answers (where all matches are correct) and one score, one response and one jump associated with a wrong match (where one or more are not matched correctly).

See Matching question type for more information.

Numerical Question

This type of question requires a number as the answer. In it's simplest form it requires just one answer to be specified. For example "What is 2 plus 2?", where 4 is the correct answer. A numerical question will also accept a number in a range as being correct. The answers are similar to short answer, where the order that the teacher lists the answers is important.

See Numerical question type for more information.

The lesson numerical question differs from the numerical quiz question and the numerical embedded question (Cloze), in a couple of ways when it evaluates answers. For example there is no wild card.

Table of Contents

Essay Questions

Short essay questions were introduced in Moodle version 1.5. These are meant for short, paragraph or two type of essays one often finds on exams. Thus we did not use the html editor, preferring a simple text field. For longer essays, the assignment module is a better choice.

The student simply enters their essay in the box provided. The teacher sees ungraded essay questions when opening the lesson. After grading, the teacher can email their responses to the student.

Essay question type page has more information.

Table of Contents

Branches and branch tables

If your lesson delivers quite a lot of information, you can divide it into sections that are called branches in Moodle. One way of moving between these branches is by adding a Branch Table page.

Branch tables are simply pages which have a set of links/jumps to other pages in the lesson. The student sees labeled buttons under the page content to provide their choices. Branch tables are similar to a multiple choice question format. They have a title, content section, student choices (called descriptions) and jumps. There is no score for a student's choice, so branch tables are grade neutral. Branch tables also can be put to special uses by a teacher. To help understand these concepts we are going to call one use a "ordered branch" and the other a "classic branch".

Ordered branches

A table of contents is an example of a use of ordered branches. Typically a lesson may start with a branch table with the title "Table of Contents". The student selects a Description button and jumps to a page in the edit order that starts a series of pages about that subject. At the end of an ordered branch, the student is given several options by a question or branch page, such as: "Go to the next page", "Start of the series again", "End the lesson", or "Return to the Table of Contents.

TOC that leads to 3 ordered branches

Classic branches

The classic branch is an advanced navigational feature. It introduces random movement within a series of pages that the teacher determines. A classic branch needs a Branch Table at the start of the series and a special navigation page called "End of Branch" at the end of the series.

The default jump in an "End of Branch" page is the preceding branch table page as an absolute jump. After a classic branch has been created, the teacher will see 3 new relative jump options: "Unseen question within a branch", "Random question within a branch" and "Random branch page". The classic branch with its "end of branch" navigation page is similar to a cluster.

Tip: As with any advanced navigational feature, it is best to add it after the basic question and branch tables pages have been created. Checking the Lesson's behavior in a student role is another best practice with highly adaptive lesson formats.

Tips when using branches

• The number of links shown when setting up or editing a branch table or a question is set by the lesson setting "Number of Answers/Branches". This parameter can be changed on the fly by simply clicking on the "Update this Lesson" button at the top of the teacher's page and changing the value.

• When a lesson includes one or more ordered or classic branches, teachers need to decide if their students must visit every branch. By adding a question or two in each branch, the teacher can set the "Minimum number of Questions" parameter to some reasonable number of questions that must be answered. Without this parameter a student might visit a single branch in the lesson, answer all its questions correctly and leave the lesson with the maximum grade based upon their attempts, not the total number of available questions.

• Remember that using branches may encourage a student to revisit a question page more than once. This can impact scoring. Since scores can not be displayed for a teacher, it is a good practice for a new Moodling Teacher to log in as a student to check how the score is kept in their Lesson.

• Choice pages gives detailed help about editing a branch . Adding a branch table reviews process.

Table of Contents

The Flash card lesson

The Lesson module can be used as a type of Flash Card assignment by changing the lesson settings. In this kind of lesson, the student is shown pages (cards) in random order. Usually these are question pages. There is no set beginning and no set end. Just a series of cards shown one after another in no particular order.

There are two very similar variants of Flash Card behavior. A Flow Control option, "After a correct answer" set to "Show an unseen page" never shows the same page twice (even if the student did not answer the question associated with the Card/Page correctly). The other option is "Show an unanswered page" which shows the student pages that may have appeared before but only if they answered the associated question wrongly.

When using either of these Flash Card lessons the teacher can decide to use either all the Cards/Pages in the lesson or just a (random) sub-set. This is done through the "Number of Pages (Cards) to show" parameter also found in the Flow Control settings. Make sure the number is less than the total number of available pages.

When using the Flash Card mode of presentation, setting the jumps is important. A correct answer jump should point to the Next Page, a wrong answer should stay on the same page.

The Lesson Flash Card mode is very similar to a random ordered Quiz, the difference is that the questions are shown one page at a time. And, extra text can be included with each question in the Flash Card.

There is also a Flashcard_module that can be added to a Moodle site. It is also possible to create lesson segment that is a mini flashcard lesson with the use of special jumps and navigational pages called Clusters.

Table of Contents

Lesson dependencies and linking

Dependency

A dependency setting allows the current lesson to be dependent upon a student's performance in one specific lesson that is in the same course. If the conditions(s) is not met, then the student will not be able to access this lesson.

These dependent conditions include: time spent, completed or receive a better than grade one specific lesson. Any combination of the conditions can be used. Please note, a Lessson must include one question for the dependent "completed" condition to be met.

• A typical use of this feature is to "daisy chain" a series of Lessons to make sure the students take the lessons in order. This might be useful in a training type of course which has no open or close dates because it can be started and finished at any time.

Links to other places

Using the link to activity in the Lesson settings, will offer the student a direct link button to another activity in the course when they complete the lesson.

Another handy Lesson setting Pop-Up, will create a window the student can view while in the lesson.

• More advanced Moodlers can figure out how to place HTML links on a lesson page. Thus it is possible to create a link to another lesson/activity, a lesson/activity in another course, or even to a specific page in a lesson. While this method can be useful, the student may not be able to find their way back to the page with the link. In general, the links can be created by copying the location of the desired link from the browser's address bar, then pasting it as a link.

Table of Contents

See also

• moodle.heroku.com Moodle XML Converter to easily create set of quizzes with minimum effort.
• Lesson samples down loadable and on line demonstrations of the Lesson module.
• Using Moodle book Chapter 9: Lessons
• Grades See how individuals and the class answered the questions (must not be a practice lesson)
• Creating a Decision-Making exercise (role play) using a Lesson
• Creating a Lesson video tutorial
• moodle.tokem.fi Go to teacher's manual and select lesson. For versions 1.5.4 and 1.6.4, a good supplement or alternative to MoodleDocs. Very hands on for specific type of teacher.