Note: You are currently viewing documentation for Moodle 2.5. Up-to-date documentation for the latest stable version of Moodle may be available here: Course completion settings.

Course completion settings: Difference between revisions

From MoodleDocs
(reorganising and updating screenshots)
Line 1: Line 1:
{{Course completion}}
{{Course completion}}
In order to use the course completion features, it has to be enabled in the site administration settings before the course completion link will appear in the course administration menu.  There are also settings which need to be reviewed in the course administration settings.  You should also install the [[Course completion status block]] and the [[Self completion block]] to view reports and use some of the features of course completion.
In order to use the course completion features, it has to be enabled in the site administration settings before the course completion link will appear in ''Administration>Course administration>Course completion.'' There are also settings which need to be reviewed in the course administration settings.  You should also install the [[Course completion status block]] and if required the [[Self completion block]] to view reports and use some of the features of course completion.


==General==


==Completion tracking settings==
{|
The following settings may be found in ''Settings > Course administration > Completion tracking'':
|[[File:coursecompletiongeneral25.png|thumb|General settings expanded by default]]
|}


===Overall criteria type aggregation===
Choose here how you wish to mark the course complete -whether you want ''Any'' or ''All'' of the requirements that follow to count towards completion.
Choose here how you wish to mark the course complete -whether you want ''Any'' or ''All'' of the requirements that follow to count towards completion.
==Condition:Activity completion==
(These settings are collapsed by default.)
{|
|[[File:activitycompletion25.png|thumb|Activity completion settings expanded]]
|}
Tick the boxes of the activities you wish to count towards completion of the course. (You need to have [[Activity completion]] enabled to be able to do this. You can decide whether ALL of the activities must be completed or ANY one of them.
==Condition:Completion of other courses==
(These settings are collapsed by default.)
{|
|[[File:noothercoursesompletion25.png|thumb|Settings when no other courses have course completion enabled]]
|[[File:othercoursecompletion25.png|thumb|Settings when course completion is enabled in one or more other courses]]
|}


:'''All''' means just that, every condition that has been checked.  The most restrictive setting.
: '''Any''' means any one of those conditions that have been specified.


===Completion dependencies===
This setting allows you to make "the completion of another course" as a condition for completing the course you are currently working in. This does not block the student from your current course; it simply means that the current course will not be marked complete until the first course has been marked complete. Thus, completion of the current course is dependent upon completion of an earlier course.  Just select one or more courses in the "Courses available box".
*This setting allows you to make "the completion of another course" as a condition for completing the course you are currently working in. This does not block the student from your current course; it simply means that the current course will not be marked complete until the first course has been marked complete. Thus, completion of the current course is dependent upon completion of an earlier course.  Just select one or more courses in the "Courses available box".
''Note: Once you have selected a course, it's not currently possible to remove it. See MDL-27114''
*If completion tracking has not been set for any other courses yet then a message will appear as in (1). If completion tracking has been set elsewhere then the display changes to (2):


==Condition: Date==
(These settings are collapsed by default.)
{|
{|
|[[File:completionnotset.png|thumb|No other courses have completion tracking set]]
|[[File:completiondate25.png|thumb|Date settings expanded]]
|[[File:completiondependencies.png|thumb|Available course to be completed before the current course is marked complete]]
|}
|}
If you tick the ''Enable'' box you can then set a date after which the course will be declared complete.


===Manual self completion===
===Manual self completion===
Line 32: Line 44:
Select the Aggregation method "Any" when one or more of the roles that are marked here have put a check mark in the course completion report in order for the student's course to be marked complete.
Select the Aggregation method "Any" when one or more of the roles that are marked here have put a check mark in the course completion report in order for the student's course to be marked complete.


===Activities completed===
This setting will show a list of activities which have [[Activity completion]] setting defined.  Put a check next to the ones which should count towards course completion. 
The "All" aggregation method means that each of the checked activities must meet their Activity completion settings.
The "Any" aggregation method means that at least one of the checked activities must meet their Activity completion settings.
===Date===
If you check the ''Enable'' box you can then set a date, after which the course will be declared complete..


===Duration after enrolment===
===Duration after enrolment===

Revision as of 10:29, 13 May 2013

In order to use the course completion features, it has to be enabled in the site administration settings before the course completion link will appear in Administration>Course administration>Course completion. There are also settings which need to be reviewed in the course administration settings. You should also install the Course completion status block and if required the Self completion block to view reports and use some of the features of course completion.

General

General settings expanded by default

Choose here how you wish to mark the course complete -whether you want Any or All of the requirements that follow to count towards completion.

Condition:Activity completion

(These settings are collapsed by default.)

Activity completion settings expanded

Tick the boxes of the activities you wish to count towards completion of the course. (You need to have Activity completion enabled to be able to do this. You can decide whether ALL of the activities must be completed or ANY one of them.

Condition:Completion of other courses

(These settings are collapsed by default.)

File:noothercoursesompletion25.png
Settings when no other courses have course completion enabled
File:othercoursecompletion25.png
Settings when course completion is enabled in one or more other courses


This setting allows you to make "the completion of another course" as a condition for completing the course you are currently working in. This does not block the student from your current course; it simply means that the current course will not be marked complete until the first course has been marked complete. Thus, completion of the current course is dependent upon completion of an earlier course. Just select one or more courses in the "Courses available box". Note: Once you have selected a course, it's not currently possible to remove it. See MDL-27114

Condition: Date

(These settings are collapsed by default.)

Date settings expanded

If you tick the Enable box you can then set a date after which the course will be declared complete.


Manual self completion

If you check the box in this link, then students can mark the course as complete themselves. In order to do this, the Self completion block must also be added to the course.

Manual completion by

This setting allows users with selected roles to mark the course as complete. If used, put a check mark next to the role that can mark the course as complete. The roles listed are ones for which the capability Mark users as complete in course completion is allowed.

Select the Aggregation method "All" when every role that is marked here must put a check mark in the course completion report in order for the student's course to be marked complete.

Select the Aggregation method "Any" when one or more of the roles that are marked here have put a check mark in the course completion report in order for the student's course to be marked complete.


Duration after enrolment

If you check the Enable box you can then choose a number of days after enrolment upon which the course will be marked complete.

Grade

If you check the Enable box you can set a passing grade for the course.

Unenrolment

If you check the box Completion on unenrolment then the student's course will be complete once they have unenrolled.

Course administration settings

Course administration > Edit settings

  • Student Progress
    • Completion tracking must be enabled
    • Completion tracking begins after enrollment (best practice is to check this).

Site administration settings

Site administration > Advanced features > Enable completion tracking (check enabled).

The above settings can be set as defaults for the site in Settings > Site administration > Courses > Course default settings.

Tip: The Cron trigger default for course completion is every 10 minutes. This is not usually what the Teachers and Students expect. The length of time can be impacted by the server cron schedule and by the code found in /lib/completionlib.php under "Cache expiry time".

Course completion capabilities

There are two capabilities, both of which are allowed for the default roles of manager, teacher and non-editing teacher: