Note: You are currently viewing documentation for Moodle 2.0. Up-to-date documentation for the latest stable version is available here: Lesson clusters.

Lesson clusters: Difference between revisions

From MoodleDocs
(removing improve template and categories)
 
(22 intermediate revisions by 7 users not shown)
Line 1: Line 1:
{{Lessons}}
{{Lesson}}
'''Clusters''' are special group of pages in a [[Lesson_module]].  A "cluster" is formed by placing a special navigational "cluster" page at the start of the group and an "end cluster" page after the last page in the group.  Clusters can be considered an advanced feature of Lesson.


'''Clusters''' are special navigational sections in a [[Lesson]].  A "cluster" is a group of  pages. It is formed by placing a "cluster" page at the start of the group and an "end cluster" page after the last page in the group.
:'''''Note:''' If you are a Moodle [[Administrator documentation|administrator]] looking for information on using multiple machines in a '''[[Server cluster]]''' see the [[Performance]] page instead.''
 
:'''''Note:''' If you are a Moodle [[Administrator documentation|administrator]] looking for information on using multiple machines in a '''server cluster''' see the [[Performance]] page instead.''


== What are clusters? ==
== What are clusters? ==


The typical cluster group (or section) contains question pages and we will focus our attention on this kind of cluster.  
The typical cluster group (or series of pages) contains question pages and we will focus our attention on this kind of cluster. It is a good practice to first add most of the content (branch table) and question pages in a lesson, then consider where to place the special navigation pages that define a cluster.


Consider a series of question pages: Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8. This represents 8 questions in a Lesson.
Consider a series of question pages: Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8. This represents 8 questions in a Lesson.
Line 13: Line 12:
A cluster is started in the logical order with a cluster page.  Clusters should be completed with an End of Cluster page for best results (otherwise they treat the End of Lesson as the End of Cluster).  
A cluster is started in the logical order with a cluster page.  Clusters should be completed with an End of Cluster page for best results (otherwise they treat the End of Lesson as the End of Cluster).  


The teacher might put some of them in a cluster: Q1, Q2, C1, Q3, Q4, Q5, EC1, Q6, Q7, Q8.  Where C1 is the first "cluster" page and EC1 is the first "end cluster" page in the lesson.
The teacher might put some of them in a cluster, where C1 is the first "cluster" page and EC1 is the first "end cluster" page in the lesson.
*Q1, '''C1''', Q2, Q3, Q4, Q5,  Q6, Q7, '''EC1''', Q8. 


A cluster represents a set of pages from which one or more may be randomly chosen. Questions within a cluster are randomly selected by choosing "Random Question within a Cluster" as the jump in the "Start Cluster" page. Questions within a cluster may either link to the End of Cluster to exit the cluster, or jump to any other page in the lesson. They may also jump to an unseen question within the cluster but this causes problems when the questions have all been seen if the student is allowed to re-enter the cluster in the same lesson attempt.
A cluster represents a set of pages from which one or more may be randomly chosen. Questions within a cluster are randomly selected by choosing "Random Question within a Cluster" as the jump in the "Start Cluster" page. Questions within a cluster may either link to the End of Cluster to exit the cluster, or jump to any other page in the lesson. They may also jump to an unseen question within the cluster but most commonly are directed back to the "Start Cluster" page.
 
Note: the start and end cluster pages are not seen by the student. In the teacher's edit mode, these pages appear to have a title, page contents (with the standard toolbar) and a jump.  But like an end of branch page, they are not visible to the student.


==Sub-Clusters==
==Sub-Clusters==


Clusters can contain sub-clusters by using Branch Tables and End of Branches.  To implement this, set up a cluster as normal with a Cluster page followed by question pages (with the jumps set up the same as above) and ended with an End of Cluster page.  
Clusters can contain sub-clusters by using Branch Tables and End of Branches.  To implement this advanced feature, set up a cluster as normal with a Cluster page followed by question pages (with the jumps set up the same as above) and ended with an End of Cluster page.  
* C1, Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, EC1
* Q1, '''C1''', Q2, Q3, Q4, Q5, Q6, Q7, '''EC1''', Q8
To set up a sub-cluster, wrap a group of questions with a Branch Table and an End of Branch.   
To set up a sub-cluster, wrap a group of questions with a Branch Table and an End of Branch.   
* C1, Q1, Q2, Q3, B1, Q4, Q5, Q6, EB1, Q7, Q8, EC1
* Q1, '''C1''', Q2, Q3, '''B1''', Q4, Q5, Q6, '''EB1''', Q7, '''EC1''', Q8
Neither the content nor the jumps of the Branch Table and the End of Branch have importance.  Rather the two pages act as markers for the sub-cluster within the main cluster.  When the student attempts the lesson, only one random question page within the sub-cluster will be displayed to the student.
Neither the content nor the jumps of the Branch Table and the End of Branch are seen by the student.  Rather the two pages act as markers for the sub-cluster within the main cluster.  When the student attempts the lesson, only one random question page within the sub-cluster will be displayed to the student.


==When to use a cluster?==
==When to use a cluster?==
A cluster is used when the teacher wants a series of questions in a lesson to appear in a different random order for each student. 
In the example: Q1, Q2, C1, Q3, Q4, Q5, EC1, Q6, Q7, Q8, when the student reaches C1, the teacher might set the jump to "go to an unseen question in the cluster".  When a jump in Q3, Q4 and Q5 is set to go back to C1, the student will see a "new" question in the cluster.  When the student has seen all the questions in the cluster, they will be sent to EC1. The student will never see EC1, just be redirected by the jump in EC1.


A cluster in the lesson works as if you want to place a series of questions that appear in random order for each student.
Any or all of the question answers inside a cluster, could exit the student from the cluster.  For example, specific jumps in Q3, Q4 and Q5 could be set to Q6, thus the student would pass over EC1 and leave the cluster.


In the example: Q1, Q2, C1, Q3, Q4, Q5, EC1, Q6, Q7, Q8, when the student reaches C1, the teacher might set the jump. to go to an unseen question in the cluster.   When a jump in Q3, Q4 and Q5 is set to go back to C1, the student will see a "new" question in the cluster. When the student has seen all the questions in the cluster, they will be sent to EC1. The student will never see EC1, just be redirected by its jump.  
==Tips and tricks==
Remember clusters have their own adaptive logic. It is always a good idea to test a cluster when logged in as a student. New users of a cluster, might do well to create a simple lesson so they understand how clusters work when applied in a more complex adaptive lesson.


Of course a jump in Q3, Q4 and Q5 could be set to Q6, thus the student would leave the cluster and pass over EC1.  
:''TIP:'' Setting an answer's jump to "Unseen question" may cause problems. For example, when a student has seen all the questions and is allowed to re-enter the cluster in the same lesson attempt.  Clusters are an advanced feature and should be checked in a student role.


==Special uses ==
:''TIP:'' Looking for a page that redirects without the student seeing it?  Alison Schubert discovered the start and end cluster pages are not seen by the student. The teacher can insert an "End of cluster" page in the edit order with a jump.  This will automatically redirect a student to another page without the usual continue button.


Looking for a page that redirects without the student seeing it?  Alison Schubert discovered that an end of cluster will fill that function.  As long as it is not placed within an existing cluster, insert it any place in a lesson.  The student will not see it. 
==See also==
*[[Branch structures]]


[[Category:Teacher]]
[[es:Clusters]]
[[Category:Lesson]]
[[de:Cluster]]
[[fr:Groupes de questions]]

Latest revision as of 06:23, 21 October 2011

Clusters are special group of pages in a Lesson_module. A "cluster" is formed by placing a special navigational "cluster" page at the start of the group and an "end cluster" page after the last page in the group. Clusters can be considered an advanced feature of Lesson.

Note: If you are a Moodle administrator looking for information on using multiple machines in a Server cluster see the Performance page instead.

What are clusters?

The typical cluster group (or series of pages) contains question pages and we will focus our attention on this kind of cluster. It is a good practice to first add most of the content (branch table) and question pages in a lesson, then consider where to place the special navigation pages that define a cluster.

Consider a series of question pages: Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8. This represents 8 questions in a Lesson.

A cluster is started in the logical order with a cluster page. Clusters should be completed with an End of Cluster page for best results (otherwise they treat the End of Lesson as the End of Cluster).

The teacher might put some of them in a cluster, where C1 is the first "cluster" page and EC1 is the first "end cluster" page in the lesson.

  • Q1, C1, Q2, Q3, Q4, Q5, Q6, Q7, EC1, Q8.

A cluster represents a set of pages from which one or more may be randomly chosen. Questions within a cluster are randomly selected by choosing "Random Question within a Cluster" as the jump in the "Start Cluster" page. Questions within a cluster may either link to the End of Cluster to exit the cluster, or jump to any other page in the lesson. They may also jump to an unseen question within the cluster but most commonly are directed back to the "Start Cluster" page.

Sub-Clusters

Clusters can contain sub-clusters by using Branch Tables and End of Branches. To implement this advanced feature, set up a cluster as normal with a Cluster page followed by question pages (with the jumps set up the same as above) and ended with an End of Cluster page.

  • Q1, C1, Q2, Q3, Q4, Q5, Q6, Q7, EC1, Q8

To set up a sub-cluster, wrap a group of questions with a Branch Table and an End of Branch.

  • Q1, C1, Q2, Q3, B1, Q4, Q5, Q6, EB1, Q7, EC1, Q8

Neither the content nor the jumps of the Branch Table and the End of Branch are seen by the student. Rather the two pages act as markers for the sub-cluster within the main cluster. When the student attempts the lesson, only one random question page within the sub-cluster will be displayed to the student.

When to use a cluster?

A cluster is used when the teacher wants a series of questions in a lesson to appear in a different random order for each student.

In the example: Q1, Q2, C1, Q3, Q4, Q5, EC1, Q6, Q7, Q8, when the student reaches C1, the teacher might set the jump to "go to an unseen question in the cluster". When a jump in Q3, Q4 and Q5 is set to go back to C1, the student will see a "new" question in the cluster. When the student has seen all the questions in the cluster, they will be sent to EC1. The student will never see EC1, just be redirected by the jump in EC1.

Any or all of the question answers inside a cluster, could exit the student from the cluster. For example, specific jumps in Q3, Q4 and Q5 could be set to Q6, thus the student would pass over EC1 and leave the cluster.

Tips and tricks

Remember clusters have their own adaptive logic. It is always a good idea to test a cluster when logged in as a student. New users of a cluster, might do well to create a simple lesson so they understand how clusters work when applied in a more complex adaptive lesson.

TIP: Setting an answer's jump to "Unseen question" may cause problems. For example, when a student has seen all the questions and is allowed to re-enter the cluster in the same lesson attempt. Clusters are an advanced feature and should be checked in a student role.
TIP: Looking for a page that redirects without the student seeing it? Alison Schubert discovered the start and end cluster pages are not seen by the student. The teacher can insert an "End of cluster" page in the edit order with a jump. This will automatically redirect a student to another page without the usual continue button.

See also