Note: You are currently viewing documentation for Moodle 1.9. Up-to-date documentation for the latest stable version is available here: Performance.

Performance: Difference between revisions

From MoodleDocs
m (→‎MySQL performance: Added link to innodb.php)
 
(77 intermediate revisions by 35 users not shown)
Line 1: Line 1:
Location: ''Administration > Server > Performance''
Moodle can be made to perform very well, at small usage levels or scaling up to many thousands of users. The factors involved in performance are basically the same as for any PHP-based database-driven system. When trying to optimize your server, try to focus on the factor which will make the most difference to the user. For example, if you have relatively more users browsing than accessing the database, look to improve the webserver performance.
Moodle can be made to perform very well, at small usage levels or scaling up to many thousands of users. The factors involved in performance are basically the same as for any PHP-based database-driven system. When trying to optimize your server, try to focus on the factor which will make the most difference to the user. For example, if you have relatively more users browsing than accessing the database, look to improve the webserver performance.


==Obtain a baseline benchmark==
==Obtain a baseline benchmark==


Before attempting any optimization, you should obtain a baseline benchmark of the component of the system you are trying to improve. For Linux try [http://lbs.sourceforge.net/ LBS] and for Windows use the Performance Monitor. Once you have quantitative data about how your system is performing currently, you'll be able to determine if the change you have made as has any real impact.
Before attempting any optimization, you should obtain a baseline benchmark of the component of the system you are trying to improve. For Linux try [http://lbs.sourceforge.net/ LBS] and for Windows use the Performance Monitor. Once you have quantitative data about how your system is performing currently, you'll be able to determine if the change you have made has had any real impact.


The overall aim of adjustments to improve performance is to use RAM (cacheing) and to reduce disk-based activity. It is especially important to try to eliminate swap file usage as much as you can. If your system starts swapping, this is a sign that you need more RAM.  
The overall aim of adjustments to improve performance is to use RAM (cacheing) and to reduce disk-based activity. It is especially important to try to eliminate swap file usage as much as you can. If your system starts swapping, this is a sign that you need more RAM.  
Line 16: Line 20:


It is possible to load-balance a Moodle installation, for example by using more than one webserver. The separate webservers should query the same database and refer to the same filestore area, but otherwise the separation of the application layers is complete enough to make this kind of clustering feasible. Similarly, the database could be a cluster of servers (e.g. a MySQL cluster), but this is not an easy task and you should seek expert support, e.g. from a Moodle Partner.
It is possible to load-balance a Moodle installation, for example by using more than one webserver. The separate webservers should query the same database and refer to the same filestore area, but otherwise the separation of the application layers is complete enough to make this kind of clustering feasible. Similarly, the database could be a cluster of servers (e.g. a MySQL cluster), but this is not an easy task and you should seek expert support, e.g. from a Moodle Partner.
'''See also''':
*[[Server cluster]]
*[http://moodle.org/mod/forum/discuss.php?d=4801 Scalability] forum discussion.
*[http://moodle.org/mod/forum/discuss.php?d=57202 Moodle clustering] forum discussion.
*[http://moodle.org/mod/forum/discuss.php?d=44470 Software load balancing] forum discussion.
*[http://moodle.org/mod/forum/discuss.php?d=49986 TCP load balancing] forum dicsussion.


==Hardware configuration==
==Hardware configuration==
Line 28: Line 39:
** Moodle, Web server and Database server on another set of disks configured as RAID-5.
** Moodle, Web server and Database server on another set of disks configured as RAID-5.
* Use '''gigabit ethernet''' for improved latency and throughput. This is especially important when you have your webserver and database server separated out on different hosts.
* Use '''gigabit ethernet''' for improved latency and throughput. This is especially important when you have your webserver and database server separated out on different hosts.
* Check the settings on your '''network card'''. You may get an improvement in performance by increasing the use of buffers and transmit/receive descriptors (balance this with processor and memory overheads) and off-loading TCP checksum calculation onto the card instead of the OS.
*  Read this [http://moodle.org/mod/forum/discuss.php?d=68579 Case Study] on a server stress test with 300 users. 
* See this [http://elearning.sgu.ac.jp/doc/PT/ accompanying report] on network traffic and server loads.
* See the [[Moodle.org configuration]]
* Also see this SFSU presentation at Educause (using VMWare): [http://www.educause.edu/Resources/AnOpenSourceLMSforaMissionCrit/162843]


==Operating System==
==Operating System==
Line 37: Line 53:


==Web server performance==
==Web server performance==
* PHP performance
 
** You are strongly recommended to use a '''PHP accelerator''' to ease CPU load, such as [http://pecl.php.net/apc APC] (recommended), [http://www.php-accelerator.co.uk/ PHPA], [http://trac.lighttpd.net/xcache/ Xcache] or [http://eaccelerator.net/ eAccelerator]. (Take care to choose a PHP accelerator that is known to work well with your version of PHP and note that Turck MMCache is [http://turckmmcache.exeprod.com/TheManifestoEnglish no longer maintained] and can cause failures with PHP 5).
Installing [http://www.mozilla.com/en-US/ Firefox] and the [https://addons.mozilla.org/en-US/firefox/addon/1843 firebug] extension will allow you to watch the time it takes for each page component to load. Also, the [https://addons.mozilla.org/en-US/firefox/addon/5369 Yslow] extension will evaluate your page against Yahoo's [http://www.skrenta.com/2007/05/14_rules_for_fast_web_pages_by_1.html 14 rules], full text [http://developer.yahoo.com/performance/rules.html Best Practices for Speeding Up Your Web Site], <strike>([http://video.yahoo.com/video/play?vid=1040890 video])</strike> for fast loading websites.
** Performance of PHP is better when installed as an '''Apache/IIS ISAPI module''' (rather than a CGI).
 
** Also check the '''memory_limit''' in php.ini, reduce it to 16M for Moodle version earlier than 1.7 ([http://moodle.org/mod/forum/discuss.php?d=39656 See this forum discussion]). For Moodle 1.7 or later, it is recommended that the value of memory_limit should be 32M.
===PHP performance===
* Apache performance
* You are strongly recommended to use a '''PHP accelerator''' to ease CPU load, such as [http://pecl.php.net/apc APC], [http://www.php-accelerator.co.uk/ PHPA], [http://trac.lighttpd.net/xcache/ Xcache] or [http://eaccelerator.net/ eAccelerator]. (Take care to choose a PHP accelerator that is known to work well with your version of PHP and note that Turck MMCache is [http://turckmmcache.exeprod.com/TheManifestoEnglish no longer maintained] and can cause failures with PHP 5).  
** Consider reducing the '''number of modules''' that Apache loads in the httpd.conf file to the minumum necessary to reduce the memory needed. Also, use the latest version of Apache 2, which reduces memory usage further.
* Improvements in read/write performance can be improved by putting the cached PHP pages on a [[TMPFS]] filesystem - but remember that you'll lose the cache contents when there is a power failure or the server is rebooted.
** For Unix/Linux systems, consider lowering '''MaxRequestsPerChild''' in httpd.conf to as low as 20-30 (if you set it any lower the overhead of forking begins to outweigh the benefits).  
* Performance of PHP is better when installed as an '''Apache/IIS ISAPI module''' (rather than a CGI).
** For a heavily loaded server, consider lowering the '''KeepAliveTimeout''' to between 2 and 5. The default is 15 (seconds) - the higher the value the more server processes will be kept waiting for possibly idle connections.
* Also check the '''memory_limit''' in php.ini, reduce it to 16M for Moodle version earlier than 1.7 ([http://moodle.org/mod/forum/discuss.php?d=39656 See this forum discussion]). For Moodle 1.7 or later, it is recommended that the value of memory_limit should be 40M. As of [http://www.php.net/ChangeLog-5.php PHP 5.2.1] the default value for the memory_limit directive is 128M.
** Alternatively, you can increase web server performance by using the '''light-weight webserver''' [http://www.lighttpd.org/ lighttpd] in combination with PHP in fastCGI-mode instead of Apache. Lighttpd has a lower memory consumption than Apache. One single apache process requires more RAM than the whole lighttpd with all of its fastCGI-processes together. Note that Lighttpd is relatively difficult to configure and administration takes a more time.
* Also see [[PHP_settings_by_Moodle_version]]
* IIS performance - all alter this location in the registry:
 
===Install HowTo===
* [http://2bits.com/articles/installing-php-apc-gnulinux-centos-5.html APC on CentOS 5.x (linux)]
* [http://fplanque.com/dev/linux/install-apc-php-cache-debian-lenny APC on Debian (linux)]
* [http://www.linuxtuts.net/211-installing-memcached-php5-memcache-module-debian-apache2.html MemCache module on Debian (Apache2 and PHP5) ]
* [http://noveckg.blogspot.com/2010/03/installing-memcached-on-centos-5x.html Installing Memcache on CentOS 5.x (linux)]
* [http://noveckg.blogspot.com/2010/02/installing-eaccelerator-cache-for-php.html Installing eAccelerator on CentOS 5.x (linux)]
* [https://docs.moodle.org/en/Installing_eAccelerator_In_Ubuntu_Server/ Installing eAccelerator on Ubuntu Server (linux)]
 
===Apache performance===
* If you are using Apache on a Windows server, use the build from [http://www.apachelounge.com Apache Lounge] which is reported to have [http://moodle.org/mod/forum/discuss.php?d=93358 performance and stability improvements] compared to the official Apache download. Note that this is an unofficial build, so may not keep up with official releases.
* Set the '''MaxClients''' directive correctly. Use this formula to help (which uses 80% of available memory to leave room for spare):
MaxClients = Total available memory * 80% / Max memory usage of apache process
:Memory usage of apache process is usually 10MB, so a general rule of thumb is to divide your available memory in megabytes by 10 to get the value of MaxClients. To find the max memory usage of apache processes read the value from the shell command:
#ps -ylC httpd --sort:rss
 
:If you need to increase the value of '''MaxClients''' beyond 256, you will also need to set the '''ServerLimit''' directive.
 
:'''Warning''': Do not be tempted to set the value of MaxClients higher than your available memory as your server will consume more RAM than available and start to swap to disk.
* Consider reducing the '''number of modules''' that Apache loads in the httpd.conf file to the minumum necessary to reduce the memory needed.  
* Use the '''latest version of Apache''' - Apache 2 has an improved memory model which reduces memory usage further.
* For Unix/Linux systems, consider lowering '''MaxRequestsPerChild''' in httpd.conf to as low as 20-30 (if you set it any lower the overhead of forking begins to outweigh the benefits).  
* For a heavily loaded server, consider setting '''KeepAlive Off''' (do this only if your Moodle pages do not contain links to resources or uploaded images) or lowering the '''KeepAliveTimeout''' to between 2 and 5. The default is 15 (seconds) - the higher the value the more server processes will be kept waiting for possibly idle connections. A more accurate value for KeepAliveTimeout is obtained by observing how long it takes your users to download a page. After altering any of the KeepAlive variables, monitor your CPU utilization as there may be an additional overhead in initiating more worker processes/threads.
* A warning about the previous performance tip.  Microsoft Internet Explorer has a (little) known bug that causes seriously problems with SSL-enabled Apache websites.  The issue is that if a web server's KeepAlive timeout is set to less than 60 seconds (say to the default of 15 seconds), MSIE can get confused about whether a keep-alive connection is available or not.  As a result, any browser POST requests (which always use a keep-alive if available) will fail to reach the server.  This is easily reproduced with postings to the Moodle forums.  Using MSIE, connect to an ssl-enabled Moodle site.  Write a quick forum post, and submit it when the form has been displayed for between 15 seconds and 60 seconds.  You will see a browser error message, and your post content will be lost.  In some cases, doing this will even crash the Windows TCP stack on the client machine. ''' So, if your site is SSL-enabled, and you use Apache, you should set the KeepAliveTimeout to at least 60 seconds'''.
* As an alternative to using KeepAlive Off, consider setting-up a '''Reverse Proxy server''' infront of the Moodle server to cache HTML files with images. You can then return Apache to using keep-alives on the Moodle server.
* If you do not use a .htaccess file, set the '''AllowOverride''' variable to AllowOverride None to prevent .htaccess lookups.
* Set '''DirectoryIndex''' correctly so as to avoid content-negotiation. Here's an example from a production server:
DirectoryIndex index.php index.html index.htm
* Unless you are doing development work on the server, set '''ExtendedStatus Off''' and disable mod_info as well as mod_status.
* Leave '''HostnameLookups Off''' (as default) to reduce DNS latency.
* Consider reducing the value of '''TimeOut''' to between 30 to 60 (seconds).  
* For the '''Options directive''', avoid Options Multiviews as this performs a directory scan. To reduce disk I/O further use
Options -Indexes FollowSymLinks
*'''Caching (unsupported)''' - ''Please note that this kind of caching may create major problems during upgrades.'' Apache can be told to make pages load a lot faster by specifying that the browser should cache some various page elements such as images and reuse them from local memory rather than ask for them again every time a page is requested. How to do this varies slightly between OSes but there are two basic steps:
 
# Install and enable mod_expires - refer to documentation or man pages
# Add this code to the virtual server config file within the <directory> section for the root directory (or within the .htaccess file if AllowOverrides is On):
<IfModule mod_expires.c>
  ExpiresActive On
  ExpiresDefault "access plus 1 seconds"
  ExpiresByType text/html "access plus 1 seconds"
  ExpiresByType image/gif "access plus 1 week"
  ExpiresByType image/jpeg "access plus 1 week"
  ExpiresByType image/png "access plus 1 week"
  ExpiresByType text/css "access plus 1 week"
  ExpiresByType text/javascript "access plus 1 week"
  ExpiresByType application/x-javascript "access plus 1 week"
  ExpiresByType text/xml "access plus 1 seconds"
</IfModule>
 
The effect is to make everything stay in the cache except HTML and XML, which change dynamically. It's possible to gain a several hundred percent decrease in load times this way. Adjust the cache times according to how often your images etc change.
 
* Compression reduces response times by reducing the size of the HTTP response
# Install and enable mod_deflate - refer to documentation or man pages
# Add this code to the virtual server config file within the <directory> section for the root directory (or within the .htaccess file if AllowOverrides is On):
<ifModule mod_deflate.c>
  AddOutputFilterByType DEFLATE text/html text/plain text/xml
</ifmodule>
 
More info: [http://www.metaskills.net/blog/heuristics/sysadmin/how-to-control-browser-caching-with-apache-2 www.metaskills.net]
 
===IIS performance===
All alter this location in the registry:
  HKLM\SYSTEM\CurrentControlSet\Services\Inetinfo\Parameters\
  HKLM\SYSTEM\CurrentControlSet\Services\Inetinfo\Parameters\
:* The equivalent to KeepAliveTimeout is '''ListenBackLog''' (IIS - registry location is HKLM\ SYSTEM\ CurrentControlSet\ Services\ Inetinfo\ Parameters). Set this to between 2 to 5.
* The equivalent to KeepAliveTimeout is '''ListenBackLog''' (IIS - registry location is HKLM\ SYSTEM\ CurrentControlSet\ Services\ Inetinfo\ Parameters). Set this to between 2 to 5.
:*Change the '''MemCacheSize''' value to adjust the amount of memory (Mb) that IIS will use for its file cache (50% of available memory by default).
*Change the '''MemCacheSize''' value to adjust the amount of memory (Mb) that IIS will use for its file cache (50% of available memory by default).
:*Change the '''MaxCachedFileSize''' to adjust the maximum size of a file cached in the file cache in bytes. Default is 262,144 (256K).
*Change the '''MaxCachedFileSize''' to adjust the maximum size of a file cached in the file cache in bytes. Default is 262,144 (256K).
:*Create a new DWORD called '''ObjectCacheTTL''' to change the length of time (in milliseconds) that objects in the cache are held in memory. Default is 30,000 milliseconds (30 seconds).
*Create a new DWORD called '''ObjectCacheTTL''' to change the length of time (in milliseconds) that objects in the cache are held in memory. Default is 30,000 milliseconds (30 seconds).
 
===Lighttpd, NginX and Cherokee performance===
You can increase server performance by using a '''light-weight''' webserver like [http://www.lighttpd.net/ lighttpd],  [http://nginx.net/ nginx] or [http://www.cherokee-project.com/ cherokee] in combination with PHP in FastCGI-mode. Lighttpd was originally created as a proof-of-concept[http://www.lighttpd.net/story] to address the [http://www.kegel.com/c10k.html C10k problem] and while primarily recommended for memory-limited servers, its design origins and asynchronous-IO model make it a suitable and proven[http://blog.lighttpd.net/articles/2006/12/28/lighttpd-powers-5-alexa-top-250-sites] alternative HTTP server for high-load websites and web apps, including Moodle. See the [[lighttpd | MoodleDocs Lighttpd page]] for additional information, configuration example and links.
 
Alternatively, both [http://www.lighttpd.net/ lighttpd] and [http://nginx.net/ nginx] are capable of performing as a load-balancer and/or reverse-proxy to alleviate load on back-end servers[http://www.linuxjournal.com/article/10108], providing benefit without requiring an actual software change on existing servers.
 
Do note that these are likely to be the least tested server environments of all particularly if you are using advanced features such as web services and/or Moodle Networking. They are probably best considered for heavily used Moodle sites with relatively simple configurations.


==Database performance==
==Database performance==
Line 63: Line 148:
===MySQL performance===
===MySQL performance===


The following are MySQL specific settings which can be adjusted for better performance in your my.cnf (my.ini in Windows). To see the current values use these commands
The following are MySQL specific settings which can be adjusted for better performance in your my.cnf (my.ini in Windows). The file contains a list of settings and their values. To see the current values use these commands
  SHOW STATUS;
  SHOW STATUS;
  SHOW VARIABLES;  
  SHOW VARIABLES;  
'''Important''': You must make backups of your database before attempting to change any MySQL server configuration. After any change to the my.cnf, restart mysqld.
'''Important''': You must make backups of your database before attempting to change any MySQL server configuration. After any change to the my.cnf, restart mysqld.
* Enable the '''query cache''' with query_cache_type = 1. For most Moodle installs, set the query_cache_size to 36M and query_cache_min_res_unit to 2K. The query cache will improve performance if you are doing few updates on the database.  
 
* Set the '''table cache''' correctly. For Moodle 1.6 set table_cache = 159, and for Moodle 1.7 set table_cache = 170. Note that this figure will change depending on the number of modules and plugins you have installed. Find the number for your server by executing the mysql statement below. Look at the number of rows printed and set table_cache to this value.
If you are able, the [http://mysqltuner.com/ MySQLTuner] tool can be run against your MySQL server and will calculate appropriate configuration values for most of the following settings based on your current load, status and variables automatically.
  mysql>SELECT table_name FROM information_schema.tables WHERE table_schema='yourmoodledbname';
 
* Enable the '''query cache''' with  
query_cache_type = 1.  
For most Moodle installs, set the following:
query_cache_size = 36M  
query_cache_min_res_unit = 2K.  
The query cache will improve performance if you are doing few updates on the database.  
* Set the '''table cache''' correctly. For Moodle 1.6 set  
table_cache = 256 #(table_open_cache in MySQL > 5.1.2)
(min), and for Moodle 1.7 set  
table_cache = 512 #(table_open_cache in MySQL > 5.1.2)
(min). The table cache is used by all threads (connections), so monitor the value of opened_tables to further adjust - if opened_tables > 3 * table_cache(table_open_cache in MySQL > 5.1.2) then increase table_cache upto your OS limit. Note also that the figure for table_cache will also change depending on the number of modules and plugins you have installed. Find the number for your server by executing the mysql statement below. Look at the number returned and set table_cache to this value.
  mysql>SELECT COUNT(table_name) FROM information_schema.tables WHERE table_schema='yourmoodledbname';
* Set the '''thread cache''' correctly. Adjust the value so that your thread cache utilization is as close to 100% as possible by this formula:
* Set the '''thread cache''' correctly. Adjust the value so that your thread cache utilization is as close to 100% as possible by this formula:
  thread cache utilization (%) = (threads_created / connections) * 100
  thread cache utilization (%) = (threads_created / connections) * 100
Line 80: Line 177:
  mysql>CHECK TABLE mdl_tablename;
  mysql>CHECK TABLE mdl_tablename;
  mysql>OPTIMIZE TABLE mdl_tablename;
  mysql>OPTIMIZE TABLE mdl_tablename;
:The common tables in Moodle to check are mdl_course_sections, mdl_forum_posts, mdl_log and mdl_sessions (if using dbsessions). Any errors need to be corrected using REPAIR TABLE (see the [http://dev.mysql.com/doc/refman/5.0/en/repair-table.html MySQL manual]).
:The common tables in Moodle to check are mdl_course_sections, mdl_forum_posts, mdl_log and mdl_sessions (if using dbsessions). Any errors need to be corrected using REPAIR TABLE (see the [http://dev.mysql.com/doc/refman/5.0/en/repair-table.html MySQL manual] and this [http://moodle.org/mod/forum/discuss.php?d=58208#p279638 forum script]).
* '''Maintain the key distribution'''. Every month or so it is a good idea to stop the mysql server and run these myisamchk commands.
* '''Maintain the key distribution'''. Every month or so it is a good idea to stop the mysql server and run these myisamchk commands.
  #myisamchk -a -S /pathtomysql/data/moodledir/*.MYI
  #myisamchk -a -S /pathtomysql/data/moodledir/*.MYI
:'''Warning''': You must stop the mysql database process (mysqld) before running any myisamchk command. If you do not, you risk data loss.
:'''Warning''': You must stop the mysql database process (mysqld) before running any myisamchk command. If you do not, you risk data loss.
* Reduce the number of '''temporary tables saved to disk'''. Check this with the created_tmp_disk_tables value. If this is relatively large (>5%) increase tmp_table_size until you see a reduction. Note that this will have an impact on RAM usage.
* Reduce the number of '''temporary tables saved to disk'''. Check this with the created_tmp_disk_tables value. If this is relatively large (>5%) increase tmp_table_size until you see a reduction. Note that this will have an impact on RAM usage.
* Moodle's tables are in the MyISAM format, so '''turn InnoDB off''' as there is no performance gain. If you must use InnoDB, you'll have to convert all of Moodle's tables. To do this run the innodb script:


  http://www.mymoodle.com/admin/innodb.php
===PostgreSQL performance===
 
There are some good papers around on tuning PostgreSQL, and Moodle's case does not seem to be different to the general case.
 
The first thing to recognise is that if you really need to worry about tuning you should be using a separate machine for the database server. If you are not using a separate machine then the answers to many performance questions are substantially muddied by the memory requirements of the rest of the application.
 
You should probably '''enable autovacuum''', unless you know what you are doing. Many e-learning sites have predictable periods of low use, so disabling autovacuum and running a specific vacuum at those times can be a good option. Or perhaps leave autovacuum running but do a full vacuum weekly in a quiet period.
 
Set '''shared_buffers''' to something reasonable. For versions up to 8.1 my testing has shown that peak performance is almost always obtained with buffers < 10000, so if you are using such a version, and have more than 512M of RAM just set shared_buffers to 10,000 (8MB).
 
The buffer management had a big overhaul in 8.2 and "reasonable" is now a much larger number. I have not conducted performance tests with 8.2, but the recommendations from others are generally that you should now scale shared_buffers much more with memory and may continue to reap benefits even up to values like 100,000 (80MB). Consider using 1-2% of system RAM.
 
PostgreSQL will also assume that the operating system is caching its files, so setting '''effective_cache_size''' to a reasonable value is also a good idea. A reasonable value will usually be (total RAM - RAM in use by programs). If you are running Linux and leave the system running for a day or two you can look at 'free' and under the 'cached' column you will see what it currently is. Consider taking that number (which is kB) and dividing it by 10 (i.e. allow 20% for other programs cache needs and then divide by 8 to get pages). If you are not using a dedicated database server you will need to decrease that value to account for usage by other programs.
 
Some other useful parameters that can have positive effects, and the values I would typically set them to on a machine with 4G RAM, are:
 
work_mem = 10240
 
That's 10M of RAM to use instead of on-disk sorting and so forth. That can give a big speed increase, but it is per connection and 200 connections * 10M is 2G, so it can theoretically chew up a lot of RAM.
 
maintenance_work_mem = 163840
 
That's 160M of RAM which will be used by (e.g.) VACUUM, index rebuild, cluster and so forth. This should only be used periodically and should be freed when those processes exit, so I believe it is well worth while.
 
max_fsm_pages = 100000
max_fsm_relations = 5000
 
These are used to hold the free-space map, and if they are too small you will see performance degradation after the database has been operating for some time. The exact numbers to set can be gleaned from the output of VACUUM VERBOSE, which prints the required FSM pages at the end of it's run. The 5x increase seems to be useful for a Moodle installation, from experience.
 
  wal_buffers = 64
 
These buffers are used for the write-ahead log, and there have been a number of reports on the PostgreSQL mailing lists of improvement from this level of increase.
 
This is a little out of date now (version 8.0) but still worth a read: http://www.powerpostgresql.com/Docs
 
And there is lots of good stuff here as well: http://www.varlena.com/GeneralBits/Tidbits/index.php
 
''Based on Andrew McMillan's post at [http://moodle.org/mod/forum/discuss.php?d=68558 Tuning PostgreSQL] forum thread.''


===Other database performance links===
===Other database performance links===
* Consider using a '''distributed cacheing system''' like [http://en.wikipedia.org/wiki/Memcached memcached] but note that memcached does not have any security features so it should be used behind a firewall.
* Consider using a '''distributed cacheing system''' like [http://en.wikipedia.org/wiki/Memcached memcached] but note that memcached does not have any security features so it should be used behind a firewall.
* Consider using PostgresSQL. See [[Arguments in favour of PostgreSQL]]
* Consider using PostgreSQL. See [[Arguments in favour of PostgreSQL]] and [http://moodle.org/mod/forum/discuss.php?d=49195 how to migrate from MySQL to PostgreSQL] (forum discussion).
* [[Increasing the database connection lifetime | Try increasing the database connection lifetime]]
* [[Increasing the database connection lifetime | Try increasing the database connection lifetime]]
* [http://dev.mysql.com/doc/refman/5.0/en/server-parameters.html General advice on tuning MySQL parameters] (advice from the MySQL manual)
* [http://dev.mysql.com/doc/refman/5.0/en/server-parameters.html General advice on tuning MySQL parameters] (advice from the MySQL manual)
* [http://www.mysqlperformanceblog.com/2007/11/01/innodb-performance-optimization-basics/ InnoDB performance optimization] taken from the [http://www.mysqlperformanceblog.com/ MySQL performance blog] site.


==Moodle Admin settings==
==Moodle Admin settings==
* In Moodle 1.7 or later, set the '''Cache type''' for your server: Site Admin -> Server -> Performance -> Cache type. There are several options available.
:*If you do not have eaccelerator or mmemcached installed, choose "internal" (which makes use of the record/internal cache - see the next bullet point).
:* If you have a single server and have compiled '''eaccelerator with shared memory support''', set the cache type to the eaccelerator option.
:* If you have a '''separate memcached server''', set the cache type to memcached and enter a csv list of server IP addresses.
* Enable the '''record/internal cache''': Site Admin -> Server -> Performance -> Record cache = True. Set the maximum amount of memory allocated to the cache in the Int Cache Max box. This will enable a primary cache for database records, without using any database engine cache, e.g. MySQL/PostgreSQL cache. See [http://tracker.moodle.org/browse/MDL-7196 this Tracker entry] for a full discussion.
* Enable the '''language cache'''.
* Enable the '''language cache'''.
* Large log files can cause overall performance to degrade over time. If you observe that the site has gradually got slower loading pages in the browser, '''reduce your Log life time''' setting (Admin/Configuration/Variables/Maintenance).
* Large log files can cause overall performance to degrade over time. If you observe that the site has gradually got slower loading pages in the browser, '''reduce your Log life time''' setting (Admin/Server/Cleanup).
* In Moodle 1.7 or later, enable the '''record cache'''. This will act as a primary cache and improve database access performance.
* Performance can be greatly improved by allowing Moodle to use the system '''zip/unzip''' commands (rather than PHP-based zip libraries) - visit Admin/Server/System Paths and enter the path to the relevant executables. (Similarly, filling in the path to '''du''' will improve Moodle's speed at listing directory contents.)
* Performance can be greatly improved by allowing Moodle to use the system '''zip/unzip''' commands (rather than PHP-based zip libraries) - visit Admin/Configure/Variables and enter the path to the relevant executables. (Similarly, filling in the path to '''du''' will improve Moodle's speed at listing directory contents.)
* Note that using '''secure web connections''' ('''https''' rather than '''http''') carries a higher processing burden, both for the webserver and the client - particularly because cacheing cannot be used as effectively, so the number of file requests is likely to increase dramatically. For this reason using https for all Moodle pages is not recommended. You can enable https just for the login screen, simply from Moodle's config page.
* Note that using '''secure web connections''' ('''https''' rather than '''http''') carries a higher processing burden, both for the webserver and the client - particularly because cacheing cannot be used as effectively, so the number of file requests is likely to increase dramatically. For this reason using https for all Moodle pages is not recommended. You can enable https just for the login screen, simply from Moodle's config page.
* Check your '''filters'''. Having too many filters active can have serious effects on server load, especially on lower-end systems. The number of active filters has a direct effect on the perceived latency of your site; that is the time taken for each page impression.  
* Check your '''filters'''. Having too many filters active can have serious effects on server load, especially on lower-end systems. The number of active filters has a direct effect on the perceived latency of your site; that is the time taken for each page impression.  
Line 106: Line 244:
* If there are performance problems loading course pages, check the '''Resource module settings'''. The setting resource_filterexternalpages is known to slow-down course pages and should be set to 'No' for better performance.
* If there are performance problems loading course pages, check the '''Resource module settings'''. The setting resource_filterexternalpages is known to slow-down course pages and should be set to 'No' for better performance.
* Check your '''forum settings'''. To improve performance set forum_trackreadposts = No and forum_usermarksread = Yes (this will impact on the convenience of your users' forum experience). Also consider setting the time of the day when old posts are cleared from the read table (forum_cleanreadtime) to when your site is less busy.
* Check your '''forum settings'''. To improve performance set forum_trackreadposts = No and forum_usermarksread = Yes (this will impact on the convenience of your users' forum experience). Also consider setting the time of the day when old posts are cleared from the read table (forum_cleanreadtime) to when your site is less busy.
* Don't use database sessions unless you really need them. On-disc sessions tend to be much faster.


==Performance of different Moodle modules==
==Performance of different Moodle modules==
Line 112: Line 251:


* The '''Chat''' module is [http://moodle.org/mod/forum/discuss.php?d=37979&parent=175079 said] to be a hog in terms of frequent HTTP requests to the main server. This can be reduced by setting the module to use ''Streamed'' updates, or, if you're using a Unix-based webserver, by running the chat in daemon mode. When using the Chat module use the configuration settings to tune for your expected load. Pay particular attention to the ''chat_old_ping'' and ''chat_refresh'' parameters as these can have greatest impact on server load.
* The '''Chat''' module is [http://moodle.org/mod/forum/discuss.php?d=37979&parent=175079 said] to be a hog in terms of frequent HTTP requests to the main server. This can be reduced by setting the module to use ''Streamed'' updates, or, if you're using a Unix-based webserver, by running the chat in daemon mode. When using the Chat module use the configuration settings to tune for your expected load. Pay particular attention to the ''chat_old_ping'' and ''chat_refresh'' parameters as these can have greatest impact on server load.
* The '''quiz''' activity is known to stretch database performance. Try to optimise your database server by tuning. See [http://moodle.org/mod/forum/discuss.php?d=25616&parent=120770 for a brief report on performance for 55 students simultaneously using quizzes]
* The '''Quiz''' module is known to stretch database performance. Try to optimise your database server by tuning. See [http://moodle.org/mod/forum/discuss.php?d=25616&parent=120770 for a brief report on performance for 55 students simultaneously using quizzes]
** See this Case Study for an extensive server stress test with 300 quiz users.[http://moodle.org/mod/forum/discuss.php?d=68579]  And this accompanying report on network traffic and server loads. [http://elearning.sgu.ac.jp/doc/PT/]
* The Moodle '''Cron''' task is triggered by calling the script ''cron.php''. If this is called over HTTP (e.g. using wget or curl) it can take a large amount of memory on large installations. If it is called by directly invoking the php command (e.g. ''php -f /path/to/moodle/directory/admin/cron.php'') efficiency can be much improved.
* The Moodle '''Cron''' task is triggered by calling the script ''cron.php''. If this is called over HTTP (e.g. using wget or curl) it can take a large amount of memory on large installations. If it is called by directly invoking the php command (e.g. ''php -f /path/to/moodle/directory/admin/cron.php'') efficiency can be much improved.
* The '''Recent activities''' block is consuming to much resources if you have huge number of records <code>mdl_log</code>. this is being tested to optimize the SQL query.
==Moodle Image Optimization==
The base images delivered in the original Moodle distribution package provide unoptimized graphics, most of which can benefit from lossless recompression utilizing [http://optipng.sourceforge.net/ optipng] for PNGs, [http://www.lcdf.org/gifsicle/ gifsicle] for GIFs and [http://www.kokkonen.net/tjko/projects.html jpegoptim] for JPGs.  Optimized graphics transfer faster and provide a faster perceived response for clients[http://www.websiteoptimization.com/speed/12/], especially distance learners.  The following example will recursively optimize (without any loss of quality) all the graphics and image files included in a base Moodle installation directory on a server with the above commands installed and available.
<pre>
find /example/directory/moodle-1.9 -iname *.png -exec optipng -o7 {} \;
find /example/directory/moodle-1.9 -iname *.gif -exec gifsicle -O2 -b {} \;
find /example/directory/moodle-1.9 -iname *.jpg -exec jpegoptim -p {} \;
</pre>
Both [http://optipng.sourceforge.net/ optipng] and [http://www.lcdf.org/gifsicle/ gifsicle] are provided in the base repositories of most newer Linux distributions; [http://www.kokkonen.net/tjko/projects.html jpegoptim] must be downloaded and installed manually.


==See also==
==See also==


*Using Moodle [http://moodle.org/mod/forum/view.php?f=94 Servers and Performance] forum
*[[Performance FAQ]]
*Using Moodle [http://moodle.org/mod/forum/discuss.php?d=57028 Performance perspectives - a little script] forum discussion
*Using Moodle: [http://moodle.org/mod/forum/view.php?f=94 Hardware and Performance] forum
 
There have been a lot of discussions on moodle.org about performance, here are some of the more interesting and (potentially) useful ones:


[[Category:Administrator]]
* [http://moodle.org/mod/forum/discuss.php?d=83057 Performance woes!]
* [http://moodle.org/mod/forum/discuss.php?d=57028 Performance perspectives - a little script]
* [http://moodle.org/mod/forum/discuss.php?d=88927 Comments on planned server hardware]
* [http://moodle.org/mod/forum/discuss.php?d=102978#p461624 Moodle performance in a pil by Martin Langhoff]
[[Category:Performance]]
[[Category:Performance]]


[[es:Rendimiento]]
[[fr:Performance]]
[[fr:Performance]]
[[ja:パフォーマンス]]
[[ja:パフォーマンス]]
[[pl:Wydajnosc]]

Latest revision as of 10:04, 25 April 2011

Location: Administration > Server > Performance


Moodle can be made to perform very well, at small usage levels or scaling up to many thousands of users. The factors involved in performance are basically the same as for any PHP-based database-driven system. When trying to optimize your server, try to focus on the factor which will make the most difference to the user. For example, if you have relatively more users browsing than accessing the database, look to improve the webserver performance.


Obtain a baseline benchmark

Before attempting any optimization, you should obtain a baseline benchmark of the component of the system you are trying to improve. For Linux try LBS and for Windows use the Performance Monitor. Once you have quantitative data about how your system is performing currently, you'll be able to determine if the change you have made has had any real impact.

The overall aim of adjustments to improve performance is to use RAM (cacheing) and to reduce disk-based activity. It is especially important to try to eliminate swap file usage as much as you can. If your system starts swapping, this is a sign that you need more RAM.

The optimization order preference is usually: primary storage (more RAM), secondary storage (faster hard disks/improved hard disk configuration), processor (more and faster).

Scalability

Moodle's design (with clear separation of application layers) allows for strongly scalable setups. (Please check the list of large Moodle installations.)

Large sites usually separate the web server and database onto separate servers, although for smaller installations this is typically not necessary.

It is possible to load-balance a Moodle installation, for example by using more than one webserver. The separate webservers should query the same database and refer to the same filestore area, but otherwise the separation of the application layers is complete enough to make this kind of clustering feasible. Similarly, the database could be a cluster of servers (e.g. a MySQL cluster), but this is not an easy task and you should seek expert support, e.g. from a Moodle Partner.

See also:

Hardware configuration

Note: The fastest and most effective change that you can make to improve performance is to increase the amount of RAM on your web server - get as much as possible (eg 4GB). Increasing primary memory will reduce the need for processes to swap to disk and will enable your server to handle more users.

  • Better performance is gained by obtaining the best processor capability you can, i.e. dual or dual core processors. A modern BIOS should allow you to enable hyperthreading, but check if this makes a difference to the overall performance of the processors by using a CPU benchmarking tool.
  • If you can afford them, use SCSI hard disks instead of SATA drives. SATA drives will increase your system's CPU utilization, whereas SCSI drives have their own integrated processors and come into their own when you have multiple drives. If you must have SATA drives, check that your motherboard and the drives themselves support NCQ (Native Command Queuing).
  • Purchase hard disks with a low seek time. This will improve the overall speed of your system, especially when accessing Moodle's reports.
  • Size your swap file correctly. The general advice is to set it to 4 x physical RAM.
  • Use a RAID disk system. Although there are many different RAID configurations you can create, the following generally works best:
    • install a hardware RAID controller (if you can)
    • the operating system and swap drive on one set of disks configured as RAID-1.
    • Moodle, Web server and Database server on another set of disks configured as RAID-5.
  • Use gigabit ethernet for improved latency and throughput. This is especially important when you have your webserver and database server separated out on different hosts.
  • Check the settings on your network card. You may get an improvement in performance by increasing the use of buffers and transmit/receive descriptors (balance this with processor and memory overheads) and off-loading TCP checksum calculation onto the card instead of the OS.
  • Read this Case Study on a server stress test with 300 users.
  • See this accompanying report on network traffic and server loads.
  • See the Moodle.org configuration
  • Also see this SFSU presentation at Educause (using VMWare): [1]

Operating System

  • You can use Linux(recommended), Unix-based, Windows or Mac OS X for the server operating system. *nix operating systems generally require less memory than Mac OS X or Windows servers for doing the same task as the server is configured with just a shell interface. Additionally Linux does not have licensing fees attached, but can have a big learning curve if you're used to another operating system. If you have a large number of processors running SMP, you may also want to consider using a highly tuned OS such as Solaris.
  • Check your own OS and vendor specific instructions for optimization steps.
    • For Linux look at the Linux Performance Team site.
    • For Linux investigate the hdparm command, e.g. hdparm -m16 -d1 can be used to enable read/write on multiple sectors and DMA. Mount disks with the async and noatime options.
    • For Windows set the sever to be optimized for network applications (Control Panel, Network Connections, LAN connection, Properties, File & Printer Sharing for Microsoft Networks, Properties, Optimization). You can also search the Microsoft TechNet site for optimization documents.

Web server performance

Installing Firefox and the firebug extension will allow you to watch the time it takes for each page component to load. Also, the Yslow extension will evaluate your page against Yahoo's 14 rules, full text Best Practices for Speeding Up Your Web Site, (video) for fast loading websites.

PHP performance

  • You are strongly recommended to use a PHP accelerator to ease CPU load, such as APC, PHPA, Xcache or eAccelerator. (Take care to choose a PHP accelerator that is known to work well with your version of PHP and note that Turck MMCache is no longer maintained and can cause failures with PHP 5).
  • Improvements in read/write performance can be improved by putting the cached PHP pages on a TMPFS filesystem - but remember that you'll lose the cache contents when there is a power failure or the server is rebooted.
  • Performance of PHP is better when installed as an Apache/IIS ISAPI module (rather than a CGI).
  • Also check the memory_limit in php.ini, reduce it to 16M for Moodle version earlier than 1.7 (See this forum discussion). For Moodle 1.7 or later, it is recommended that the value of memory_limit should be 40M. As of PHP 5.2.1 the default value for the memory_limit directive is 128M.
  • Also see PHP_settings_by_Moodle_version

Install HowTo

Apache performance

  • If you are using Apache on a Windows server, use the build from Apache Lounge which is reported to have performance and stability improvements compared to the official Apache download. Note that this is an unofficial build, so may not keep up with official releases.
  • Set the MaxClients directive correctly. Use this formula to help (which uses 80% of available memory to leave room for spare):
MaxClients = Total available memory * 80% / Max memory usage of apache process
Memory usage of apache process is usually 10MB, so a general rule of thumb is to divide your available memory in megabytes by 10 to get the value of MaxClients. To find the max memory usage of apache processes read the value from the shell command:
#ps -ylC httpd --sort:rss
If you need to increase the value of MaxClients beyond 256, you will also need to set the ServerLimit directive.
Warning: Do not be tempted to set the value of MaxClients higher than your available memory as your server will consume more RAM than available and start to swap to disk.
  • Consider reducing the number of modules that Apache loads in the httpd.conf file to the minumum necessary to reduce the memory needed.
  • Use the latest version of Apache - Apache 2 has an improved memory model which reduces memory usage further.
  • For Unix/Linux systems, consider lowering MaxRequestsPerChild in httpd.conf to as low as 20-30 (if you set it any lower the overhead of forking begins to outweigh the benefits).
  • For a heavily loaded server, consider setting KeepAlive Off (do this only if your Moodle pages do not contain links to resources or uploaded images) or lowering the KeepAliveTimeout to between 2 and 5. The default is 15 (seconds) - the higher the value the more server processes will be kept waiting for possibly idle connections. A more accurate value for KeepAliveTimeout is obtained by observing how long it takes your users to download a page. After altering any of the KeepAlive variables, monitor your CPU utilization as there may be an additional overhead in initiating more worker processes/threads.
  • A warning about the previous performance tip. Microsoft Internet Explorer has a (little) known bug that causes seriously problems with SSL-enabled Apache websites. The issue is that if a web server's KeepAlive timeout is set to less than 60 seconds (say to the default of 15 seconds), MSIE can get confused about whether a keep-alive connection is available or not. As a result, any browser POST requests (which always use a keep-alive if available) will fail to reach the server. This is easily reproduced with postings to the Moodle forums. Using MSIE, connect to an ssl-enabled Moodle site. Write a quick forum post, and submit it when the form has been displayed for between 15 seconds and 60 seconds. You will see a browser error message, and your post content will be lost. In some cases, doing this will even crash the Windows TCP stack on the client machine. So, if your site is SSL-enabled, and you use Apache, you should set the KeepAliveTimeout to at least 60 seconds.
  • As an alternative to using KeepAlive Off, consider setting-up a Reverse Proxy server infront of the Moodle server to cache HTML files with images. You can then return Apache to using keep-alives on the Moodle server.
  • If you do not use a .htaccess file, set the AllowOverride variable to AllowOverride None to prevent .htaccess lookups.
  • Set DirectoryIndex correctly so as to avoid content-negotiation. Here's an example from a production server:
DirectoryIndex index.php index.html index.htm
  • Unless you are doing development work on the server, set ExtendedStatus Off and disable mod_info as well as mod_status.
  • Leave HostnameLookups Off (as default) to reduce DNS latency.
  • Consider reducing the value of TimeOut to between 30 to 60 (seconds).
  • For the Options directive, avoid Options Multiviews as this performs a directory scan. To reduce disk I/O further use
Options -Indexes FollowSymLinks
  • Caching (unsupported) - Please note that this kind of caching may create major problems during upgrades. Apache can be told to make pages load a lot faster by specifying that the browser should cache some various page elements such as images and reuse them from local memory rather than ask for them again every time a page is requested. How to do this varies slightly between OSes but there are two basic steps:
  1. Install and enable mod_expires - refer to documentation or man pages
  2. Add this code to the virtual server config file within the <directory> section for the root directory (or within the .htaccess file if AllowOverrides is On):
<IfModule mod_expires.c>
 ExpiresActive On
 ExpiresDefault "access plus 1 seconds"
 ExpiresByType text/html "access plus 1 seconds"
 ExpiresByType image/gif "access plus 1 week"
 ExpiresByType image/jpeg "access plus 1 week"
 ExpiresByType image/png "access plus 1 week"
 ExpiresByType text/css "access plus 1 week"
 ExpiresByType text/javascript "access plus 1 week"
 ExpiresByType application/x-javascript "access plus 1 week"
 ExpiresByType text/xml "access plus 1 seconds"
</IfModule>

The effect is to make everything stay in the cache except HTML and XML, which change dynamically. It's possible to gain a several hundred percent decrease in load times this way. Adjust the cache times according to how often your images etc change.

  • Compression reduces response times by reducing the size of the HTTP response
  1. Install and enable mod_deflate - refer to documentation or man pages
  2. Add this code to the virtual server config file within the <directory> section for the root directory (or within the .htaccess file if AllowOverrides is On):
<ifModule mod_deflate.c>
  AddOutputFilterByType DEFLATE text/html text/plain text/xml
</ifmodule>

More info: www.metaskills.net

IIS performance

All alter this location in the registry:

HKLM\SYSTEM\CurrentControlSet\Services\Inetinfo\Parameters\
  • The equivalent to KeepAliveTimeout is ListenBackLog (IIS - registry location is HKLM\ SYSTEM\ CurrentControlSet\ Services\ Inetinfo\ Parameters). Set this to between 2 to 5.
  • Change the MemCacheSize value to adjust the amount of memory (Mb) that IIS will use for its file cache (50% of available memory by default).
  • Change the MaxCachedFileSize to adjust the maximum size of a file cached in the file cache in bytes. Default is 262,144 (256K).
  • Create a new DWORD called ObjectCacheTTL to change the length of time (in milliseconds) that objects in the cache are held in memory. Default is 30,000 milliseconds (30 seconds).

Lighttpd, NginX and Cherokee performance

You can increase server performance by using a light-weight webserver like lighttpd, nginx or cherokee in combination with PHP in FastCGI-mode. Lighttpd was originally created as a proof-of-concept[2] to address the C10k problem and while primarily recommended for memory-limited servers, its design origins and asynchronous-IO model make it a suitable and proven[3] alternative HTTP server for high-load websites and web apps, including Moodle. See the MoodleDocs Lighttpd page for additional information, configuration example and links.

Alternatively, both lighttpd and nginx are capable of performing as a load-balancer and/or reverse-proxy to alleviate load on back-end servers[4], providing benefit without requiring an actual software change on existing servers.

Do note that these are likely to be the least tested server environments of all particularly if you are using advanced features such as web services and/or Moodle Networking. They are probably best considered for heavily used Moodle sites with relatively simple configurations.

Database performance

Moodle contains a script which will display some key database performance statistics from the ADOdb performance monitor. Run the script in your browser as in the following example:

http://www.mymoodle.com/admin/dbperformance.php

Use the data displayed as a guide to tune and improve the performance of your database server.

MySQL performance

The following are MySQL specific settings which can be adjusted for better performance in your my.cnf (my.ini in Windows). The file contains a list of settings and their values. To see the current values use these commands

SHOW STATUS;
SHOW VARIABLES; 

Important: You must make backups of your database before attempting to change any MySQL server configuration. After any change to the my.cnf, restart mysqld.

If you are able, the MySQLTuner tool can be run against your MySQL server and will calculate appropriate configuration values for most of the following settings based on your current load, status and variables automatically.

  • Enable the query cache with
query_cache_type = 1. 

For most Moodle installs, set the following:

query_cache_size = 36M 
query_cache_min_res_unit = 2K. 

The query cache will improve performance if you are doing few updates on the database.

  • Set the table cache correctly. For Moodle 1.6 set
table_cache = 256 #(table_open_cache in MySQL > 5.1.2)

(min), and for Moodle 1.7 set

table_cache = 512 #(table_open_cache in MySQL > 5.1.2)

(min). The table cache is used by all threads (connections), so monitor the value of opened_tables to further adjust - if opened_tables > 3 * table_cache(table_open_cache in MySQL > 5.1.2) then increase table_cache upto your OS limit. Note also that the figure for table_cache will also change depending on the number of modules and plugins you have installed. Find the number for your server by executing the mysql statement below. Look at the number returned and set table_cache to this value.

mysql>SELECT COUNT(table_name) FROM information_schema.tables WHERE table_schema='yourmoodledbname';
  • Set the thread cache correctly. Adjust the value so that your thread cache utilization is as close to 100% as possible by this formula:
thread cache utilization (%) = (threads_created / connections) * 100
  • The key buffer can improve the access speed to Moodle's SELECT queries. The correct size depends on the size of the index files (.myi) and in Moodle 1.6 or later (without any additional modules and plugins), the recommendation for this value is key_buffer_size = 32M. Ideally you want the database to be reading once from the disk for every 100 requests so monitor that the value is suitable for your install by adjusting the value of key_buffer_size so that the following formulas are true:
key_read / key_read_requests < 0.01
key_write / key_write_requests <= 1.0
  • Set the maximum number of connections so that your users will not see a "Too many connections" message. Be careful that this may have an impact on the total memory used. MySQL connections usually last for milliseconds, so it is unusual even for a heavily loaded server for this value to be over 200.
  • Manage high burst activity. If your Moodle install uses a lot of quizzes and you are experiencing performance problems (check by monitoring the value of threads_connected - it should not be rising) consider increasing the value of back_log.
  • Optimize your tables weekly and after upgrading Moodle. It is good practice to also optimize your tables after performing a large data deletion exercise, e.g. at the end of your semester or academic year. This will ensure that index files are up to date. Backup your database first and then use:
mysql>CHECK TABLE mdl_tablename;
mysql>OPTIMIZE TABLE mdl_tablename;
The common tables in Moodle to check are mdl_course_sections, mdl_forum_posts, mdl_log and mdl_sessions (if using dbsessions). Any errors need to be corrected using REPAIR TABLE (see the MySQL manual and this forum script).
  • Maintain the key distribution. Every month or so it is a good idea to stop the mysql server and run these myisamchk commands.
#myisamchk -a -S /pathtomysql/data/moodledir/*.MYI
Warning: You must stop the mysql database process (mysqld) before running any myisamchk command. If you do not, you risk data loss.
  • Reduce the number of temporary tables saved to disk. Check this with the created_tmp_disk_tables value. If this is relatively large (>5%) increase tmp_table_size until you see a reduction. Note that this will have an impact on RAM usage.

PostgreSQL performance

There are some good papers around on tuning PostgreSQL, and Moodle's case does not seem to be different to the general case.

The first thing to recognise is that if you really need to worry about tuning you should be using a separate machine for the database server. If you are not using a separate machine then the answers to many performance questions are substantially muddied by the memory requirements of the rest of the application.

You should probably enable autovacuum, unless you know what you are doing. Many e-learning sites have predictable periods of low use, so disabling autovacuum and running a specific vacuum at those times can be a good option. Or perhaps leave autovacuum running but do a full vacuum weekly in a quiet period.

Set shared_buffers to something reasonable. For versions up to 8.1 my testing has shown that peak performance is almost always obtained with buffers < 10000, so if you are using such a version, and have more than 512M of RAM just set shared_buffers to 10,000 (8MB).

The buffer management had a big overhaul in 8.2 and "reasonable" is now a much larger number. I have not conducted performance tests with 8.2, but the recommendations from others are generally that you should now scale shared_buffers much more with memory and may continue to reap benefits even up to values like 100,000 (80MB). Consider using 1-2% of system RAM.

PostgreSQL will also assume that the operating system is caching its files, so setting effective_cache_size to a reasonable value is also a good idea. A reasonable value will usually be (total RAM - RAM in use by programs). If you are running Linux and leave the system running for a day or two you can look at 'free' and under the 'cached' column you will see what it currently is. Consider taking that number (which is kB) and dividing it by 10 (i.e. allow 20% for other programs cache needs and then divide by 8 to get pages). If you are not using a dedicated database server you will need to decrease that value to account for usage by other programs.

Some other useful parameters that can have positive effects, and the values I would typically set them to on a machine with 4G RAM, are:

work_mem = 10240

That's 10M of RAM to use instead of on-disk sorting and so forth. That can give a big speed increase, but it is per connection and 200 connections * 10M is 2G, so it can theoretically chew up a lot of RAM.

maintenance_work_mem = 163840

That's 160M of RAM which will be used by (e.g.) VACUUM, index rebuild, cluster and so forth. This should only be used periodically and should be freed when those processes exit, so I believe it is well worth while.

max_fsm_pages = 100000
max_fsm_relations = 5000

These are used to hold the free-space map, and if they are too small you will see performance degradation after the database has been operating for some time. The exact numbers to set can be gleaned from the output of VACUUM VERBOSE, which prints the required FSM pages at the end of it's run. The 5x increase seems to be useful for a Moodle installation, from experience.

wal_buffers = 64

These buffers are used for the write-ahead log, and there have been a number of reports on the PostgreSQL mailing lists of improvement from this level of increase.

This is a little out of date now (version 8.0) but still worth a read: http://www.powerpostgresql.com/Docs

And there is lots of good stuff here as well: http://www.varlena.com/GeneralBits/Tidbits/index.php

Based on Andrew McMillan's post at Tuning PostgreSQL forum thread.

Other database performance links

Moodle Admin settings

  • In Moodle 1.7 or later, set the Cache type for your server: Site Admin -> Server -> Performance -> Cache type. There are several options available.
  • If you do not have eaccelerator or mmemcached installed, choose "internal" (which makes use of the record/internal cache - see the next bullet point).
  • If you have a single server and have compiled eaccelerator with shared memory support, set the cache type to the eaccelerator option.
  • If you have a separate memcached server, set the cache type to memcached and enter a csv list of server IP addresses.
  • Enable the record/internal cache: Site Admin -> Server -> Performance -> Record cache = True. Set the maximum amount of memory allocated to the cache in the Int Cache Max box. This will enable a primary cache for database records, without using any database engine cache, e.g. MySQL/PostgreSQL cache. See this Tracker entry for a full discussion.
  • Enable the language cache.
  • Large log files can cause overall performance to degrade over time. If you observe that the site has gradually got slower loading pages in the browser, reduce your Log life time setting (Admin/Server/Cleanup).
  • Performance can be greatly improved by allowing Moodle to use the system zip/unzip commands (rather than PHP-based zip libraries) - visit Admin/Server/System Paths and enter the path to the relevant executables. (Similarly, filling in the path to du will improve Moodle's speed at listing directory contents.)
  • Note that using secure web connections (https rather than http) carries a higher processing burden, both for the webserver and the client - particularly because cacheing cannot be used as effectively, so the number of file requests is likely to increase dramatically. For this reason using https for all Moodle pages is not recommended. You can enable https just for the login screen, simply from Moodle's config page.
  • Check your filters. Having too many filters active can have serious effects on server load, especially on lower-end systems. The number of active filters has a direct effect on the perceived latency of your site; that is the time taken for each page impression.
  • Enable the text cache but do not "Filter all strings" unless you have a specific need. If in doubt profile the performance, and see how your changes affect the processing time.
  • Check your anti-virus measures on the server. Although they are useful for preventing security holes being exploited, some "On-Demand" scanners can affect performance by scanning page content (word, ppt files etc).
  • If there are performance problems loading course pages, check the Resource module settings. The setting resource_filterexternalpages is known to slow-down course pages and should be set to 'No' for better performance.
  • Check your forum settings. To improve performance set forum_trackreadposts = No and forum_usermarksread = Yes (this will impact on the convenience of your users' forum experience). Also consider setting the time of the day when old posts are cleared from the read table (forum_cleanreadtime) to when your site is less busy.
  • Don't use database sessions unless you really need them. On-disc sessions tend to be much faster.

Performance of different Moodle modules

Moodle's activity modules, filters, and other plugins can be activated/deactivated. If necessary, you may wish to deactivate some features (such as chat) if not required - but this isn't necessary. Some notes on the performance of certain modules:

  • The Chat module is said to be a hog in terms of frequent HTTP requests to the main server. This can be reduced by setting the module to use Streamed updates, or, if you're using a Unix-based webserver, by running the chat in daemon mode. When using the Chat module use the configuration settings to tune for your expected load. Pay particular attention to the chat_old_ping and chat_refresh parameters as these can have greatest impact on server load.
  • The Quiz module is known to stretch database performance. Try to optimise your database server by tuning. See for a brief report on performance for 55 students simultaneously using quizzes
    • See this Case Study for an extensive server stress test with 300 quiz users.[5] And this accompanying report on network traffic and server loads. [6]
  • The Moodle Cron task is triggered by calling the script cron.php. If this is called over HTTP (e.g. using wget or curl) it can take a large amount of memory on large installations. If it is called by directly invoking the php command (e.g. php -f /path/to/moodle/directory/admin/cron.php) efficiency can be much improved.
  • The Recent activities block is consuming to much resources if you have huge number of records mdl_log. this is being tested to optimize the SQL query.

Moodle Image Optimization

The base images delivered in the original Moodle distribution package provide unoptimized graphics, most of which can benefit from lossless recompression utilizing optipng for PNGs, gifsicle for GIFs and jpegoptim for JPGs. Optimized graphics transfer faster and provide a faster perceived response for clients[7], especially distance learners. The following example will recursively optimize (without any loss of quality) all the graphics and image files included in a base Moodle installation directory on a server with the above commands installed and available.

find /example/directory/moodle-1.9 -iname *.png -exec optipng -o7 {} \;
find /example/directory/moodle-1.9 -iname *.gif -exec gifsicle -O2 -b {} \;
find /example/directory/moodle-1.9 -iname *.jpg -exec jpegoptim -p {} \;

Both optipng and gifsicle are provided in the base repositories of most newer Linux distributions; jpegoptim must be downloaded and installed manually.

See also

There have been a lot of discussions on moodle.org about performance, here are some of the more interesting and (potentially) useful ones: